Reference record for OID 1.3.6.1.4.1.597.4.3.5.3


parent
1.3.6.1.4.1.597.4.3.5 (sCfg)
node code
3
node name
sCfgCritFile
dot oid
1.3.6.1.4.1.597.4.3.5.3
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) comtek(597) comtekVms(4) comtekVmsNMSysMgrMib(3) sCfg(5) sCfgCritFile(3)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • /iso/identified-organization/dod/internet/private/enterprises/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • /iso/org/dod/internet/private/enterprise/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • /iso/org/dod/internet/private/enterprises/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • /iso/iso-identified-organization/dod/internet/private/enterprise/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • /iso/iso-identified-organization/dod/internet/private/enterprises/comtek/comtekVms/comtekVmsNMSysMgrMib/sCfg/sCfgCritFile
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/597/4/3/5/3

    Description by mibdepot

    Name of the file currently being used to identify critical
    processes. This file is associated with the logical name
    COMTEK$SYSMGR_CRITPROC. Changing this variable redefines
    the COMTEK$SYSMGR_CRITPROC logical name. NM*SysMgr
    must be reinitialized (by setting the variable
    sCfgReinitSubagent to true) before the new critical process
    file is used. If a set-request is performed on this variable
    and the specified file name does not exist, is not accessible
    by the subagent, or contains invalid data, the file name is
    not changed, an error is returned, and a sSwErr trap is
    generated describing the error.

    Set-requests: Take effect only after reinitialization
    (sCfgReinitSubagent)

    NOTE: To make changes to this value permanent across system
    reboots, the definition of this logical name must also be
    changed in the system startup procedures.

    Parsed from file NMSYSMGR.MIB.txt
    Company: None
    Module: COMTEK-VMS-NM-SYSMGR-MIB

    Description by circitor

    Name of the file currently being used to identify critical
    processes. This file is associated with the logical name
    COMTEK$SYSMGR_CRITPROC. Changing this variable redefines
    the COMTEK$SYSMGR_CRITPROC logical name. NM*SysMgr
    must be reinitialized (by setting the variable
    sCfgReinitSubagent to true) before the new critical process
    file is used. If a set-request is performed on this variable
    and the specified file name does not exist, is not accessible
    by the subagent, or contains invalid data, the file name is
    not changed, an error is returned, and a sSwErr trap is
    generated describing the error.

    Set-requests: Take effect only after reinitialization
    (sCfgReinitSubagent)

    NOTE: To make changes to this value permanent across system
    reboots, the definition of this logical name must also be
    changed in the system startup procedures.

    Parsed from file COMTEK-VMS-NM-SYSMGR-MIB.mib
    Module: COMTEK-VMS-NM-SYSMGR-MIB

    Information by oid_info

    Vendor: Comtek Services Inc.
    Module: COMTEK-VMS-NM-SYSMGR-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    sCfgCritFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file currently being used to identify critical processes. This file is associated with the logical name COMTEK$SYSMGR_CRITPROC. Changing this variable redefines the COMTEK$SYSMGR_CRITPROC logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before the new critical process file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures." ::= { sCfg 3 }

    Information by circitor

    sCfgCritFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Name of the file currently being used to identify critical processes. This file is associated with the logical name COMTEK$SYSMGR_CRITPROC. Changing this variable redefines the COMTEK$SYSMGR_CRITPROC logical name. NM*SysMgr must be reinitialized (by setting the variable sCfgReinitSubagent to true) before the new critical process file is used. If a set-request is performed on this variable and the specified file name does not exist, is not accessible by the subagent, or contains invalid data, the file name is not changed, an error is returned, and a sSwErr trap is generated describing the error. Set-requests: Take effect only after reinitialization (sCfgReinitSubagent) NOTE: To make changes to this value permanent across system reboots, the definition of this logical name must also be changed in the system startup procedures." ::= { sCfg 3 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.597)

    Harris Steve

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.597.4.3.5.3.0 sCfgCritFile 0 0 None

    Brothers (59)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.597.4.3.5.1 sCfgFile 1 1 Name of the file currently being used for NM*SysMgr
    initialization parameters. This file is identified by the
    logical name COMTE…
    1.3.6.1.4.1.597.4.3.5.2 sCfgLogFile 1 1 Name of the log file currently being used by NM*SysMgr.
    If this process is run interactively, this variable will
    have the value S…
    1.3.6.1.4.1.597.4.3.5.4 sCfgReinitSubagent 1 1 Flag which may be set to force the NM*SysMgr Subagent to
    reinitialize. Reinitialization involves resetting the
    process configura…
    1.3.6.1.4.1.597.4.3.5.5 sCfgTraps 1 1 Flag which determines if any trap messages are sent to the
    NM*Master Agent. Setting this variable to disabled(2)
    disables all tr…
    1.3.6.1.4.1.597.4.3.5.6 sCfgHwErrTraps 1 1 Flag which determines if hardware error traps (sHwErr)
    should be sent. Setting this variable to enabled(1) causes
    a trap to be s…
    1.3.6.1.4.1.597.4.3.5.7 sCfgCpuLimit 1 1 The percentage of CPU utilization at which excessive
    CPU utilization (sCpuUsage) traps begin to be sent.
    A value of 0 disables th…
    1.3.6.1.4.1.597.4.3.5.8 sCfgIntLimit 1 1 The percentage of interrupt CPU utilization at which
    excessive interrupt utilization (sIntUsage) traps begin
    to be sent. A value…
    1.3.6.1.4.1.597.4.3.5.9 sCfgDskOps 1 1 The threshold at which excessive disk busy traps (sDskOpSec)
    begin to be sent. This value is expressed in terms of disk
    operatio…
    1.3.6.1.4.1.597.4.3.5.10 sCfgDskLimit 1 1 The percentage of disk space utilization at which excessive
    disk utilization (sDskFull) traps begin to be sent. If this
    variable…
    1.3.6.1.4.1.597.4.3.5.11 sCfgPgLimit 1 1 The percentage of page file utilization at which excessive
    page file utilization (sPgFull) traps begin to be sent.
    A value of 0 d…
    1.3.6.1.4.1.597.4.3.5.12 sCfgSwpLimit 1 1 The percentage of swap file utilization at which excessive
    swap file utilization (sSwpFull) traps begin to be sent.
    A value of 0 …
    1.3.6.1.4.1.597.4.3.5.13 sCfgPsTimer 1 1 The number of minutes between updates of the process
    statistics table (sPsTbl) data. A value of 0 disables
    gathering of process …
    1.3.6.1.4.1.597.4.3.5.14 sCfgDskTimer 1 1 The number of minutes between updates of the disk table
    (sDskTbl) data. A value of 0 disables gathering of disk
    related data.

    Con…
    1.3.6.1.4.1.597.4.3.5.15 sCfgHwErrTimer 1 1 The number of minutes between updates of the hardware error
    table (sHwErrTbl) data. A value of 0 disables gathering of
    hardware …
    1.3.6.1.4.1.597.4.3.5.16 sCfgSysInfoTimer 1 1 The number of minutes between updates of the system
    information (sSyi) data. A value of 0 disables gathering
    of system informati…
    1.3.6.1.4.1.597.4.3.5.17 sCfgCritTimer 1 1 The number of minutes between critical process table (sCritTbl)
    updates. A value of 0 disables critical process missing
    processi…
    1.3.6.1.4.1.597.4.3.5.18 sCfgDskAlarm 1 1 The number of minutes between repeat traps for disk (sDskFull),
    page file (sPgFull), or swap file full (sSwpFull) conditions.
    A v…
    1.3.6.1.4.1.597.4.3.5.19 sCfgCritAlarm 1 1 The number of minutes between repeat traps for a given
    critical process missing condition. Setting this variable to
    0 causes onl…
    1.3.6.1.4.1.597.4.3.5.20 sCfgTrapTblSize 1 1 The maximum number of traps to be retained. Traps that are
    retained may be resent (see sTrapResendSeqNum) unless
    too many subseq…
    1.3.6.1.4.1.597.4.3.5.21 sCfgHostName 1 1 The name of the host that the subagent is communicating with.
    This is the host name where the NM*Master Agent resides. This
    varia…
    1.3.6.1.4.1.597.4.3.5.22 sCfgAllPsData 1 1 This variable controls the amount of data that is available
    in the process statistics table (sPsTbl). If this flag is
    set to no(…
    1.3.6.1.4.1.597.4.3.5.23 sCfgTimeout 1 1 This variable identifies the time-out value that is to be
    used by the subagent during subtree registration. If this
    value is set…
    1.3.6.1.4.1.597.4.3.5.24 sCfgOpcomSecurity 1 1 Flag which determines if the opcom security messages are to
    be sent as opcom traps. Setting this variable to enabled(1)
    causes o…
    1.3.6.1.4.1.597.4.3.5.25 sCfgControlTermProc 1 1 Flag which may be used to disable process termination by
    the sCfgTermProc variable. Setting this variable to enabled(1)
    allows t…
    1.3.6.1.4.1.597.4.3.5.26 sCfgTermProc 1 1 Flag which may be used to shutdown the NM*SysMgr process.
    Setting this flag to true causes the NM*SysMgr process to
    respond to th…
    1.3.6.1.4.1.597.4.3.5.27 sCfgVersion 1 1 Current version of the NM*SysMgr Subagent software.
    1.3.6.1.4.1.597.4.3.5.28 sCfgUpTime 1 1 Subagent up time.
    1.3.6.1.4.1.597.4.3.5.29 sCfgMaxTrapSec 1 1 This value specifies the maximum number of traps per second
    that may be sent. A value of zero disables trap throttling,
    allowing…
    1.3.6.1.4.1.597.4.3.5.30 sCfgCritDsk 1 1 Name of the file currently being used to identify critical
    disk space and operations per second trap thresholds for
    individual di…
    1.3.6.1.4.1.597.4.3.5.31 sCfgCritQue 1 1 Name of the file currently being used to identify queues
    to be monitored. This file is associated with the logical name
    COMTEK$S…
    1.3.6.1.4.1.597.4.3.5.32 sCfgQueTimer 1 1 The number of minutes between updates of the queue
    statistics table (sQTbl) data. A value of 0 disables
    gathering of queue relat…
    1.3.6.1.4.1.597.4.3.5.33 sCfgDskMinFreeBlks 1 1 The minimum number of disk blocks that must be free on a
    disk. When the number of free blocks on a disk drops below
    this level, …
    1.3.6.1.4.1.597.4.3.5.34 sCfgMemLimit 1 1 The percentage of physical memory utilization at which
    excessive memory utilization (sMemFull) traps begin to be sent.
    A value of…
    1.3.6.1.4.1.597.4.3.5.35 sCfgCOMQueueLimit 1 1 The number of processes in COM state at which excessive
    compute queue (sCOMQue) traps begin to be sent. A value
    of 0 disables the…
    1.3.6.1.4.1.597.4.3.5.36 sCfgCOMOQueueLimit 1 1 The number of processes in COMO state at which excessive
    outswapped compute queue (sCOMOQue) traps begin to be sent.
    A value of 0…
    1.3.6.1.4.1.597.4.3.5.37 sCfgOpcomCards 1 1 Flag which determines if NM*SysMgr will receive opcom
    CARDS class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.38 sCfgOpcomCentral 1 1 Flag which determines if NM*SysMgr will receive opcom
    CENTRAL class messages. Setting this variable to disabled(2)
    disables NM*S…
    1.3.6.1.4.1.597.4.3.5.39 sCfgOpcomCluster 1 1 Flag which determines if NM*SysMgr will receive opcom
    CLUSTERclass messages. Setting this variable to disabled(2)
    disables NM*Sy…
    1.3.6.1.4.1.597.4.3.5.40 sCfgOpcomDevices 1 1 Flag which determines if NM*SysMgr will receive opcom
    DEVICES class messages. Setting this variable to disabled(2)
    disables NM*S…
    1.3.6.1.4.1.597.4.3.5.41 sCfgOpcomDisks 1 1 Flag which determines if NM*SysMgr will receive opcom
    DISKS class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.42 sCfgOpcomLicense 1 1 Flag which determines if NM*SysMgr will receive opcom
    LICENSE class messages. Setting this variable to disabled(2)
    disables NM*S…
    1.3.6.1.4.1.597.4.3.5.43 sCfgOpcomNetwork 1 1 Flag which determines if NM*SysMgr will receive opcom
    NETWORK class messages. Setting this variable to disabled(2)
    disables NM*S…
    1.3.6.1.4.1.597.4.3.5.44 sCfgOpcomOper1 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER1 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.45 sCfgOpcomOper2 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER2 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.46 sCfgOpcomOper3 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER3 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.47 sCfgOpcomOper4 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER4 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.48 sCfgOpcomOper5 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER5 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.49 sCfgOpcomOper6 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER6 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.50 sCfgOpcomOper7 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER7 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.51 sCfgOpcomOper8 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER8 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.52 sCfgOpcomOper9 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER9 class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.53 sCfgOpcomOper10 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER10 class messages. Setting this variable to disabled(2)
    disables NM*Sy…
    1.3.6.1.4.1.597.4.3.5.54 sCfgOpcomOper11 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER11 class messages. Setting this variable to disabled(2)
    disables NM*Sy…
    1.3.6.1.4.1.597.4.3.5.55 sCfgOpcomOper12 1 1 Flag which determines if NM*SysMgr will receive opcom
    OPER12 class messages. Setting this variable to disabled(2)
    disables NM*Sy…
    1.3.6.1.4.1.597.4.3.5.56 sCfgOpcomPrinter 1 1 Flag which determines if NM*SysMgr will receive opcom
    PRINTER class messages. Setting this variable to disabled(2)
    disables NM*S…
    1.3.6.1.4.1.597.4.3.5.57 sCfgOpcomTapes 1 1 Flag which determines if NM*SysMgr will receive opcom
    TAPES class messages. Setting this variable to disabled(2)
    disables NM*Sys…
    1.3.6.1.4.1.597.4.3.5.58 sCfgOpcomFilter 1 1 Flag which determines if NM*SysMgr will drop opcom messages that
    match filter criteria or drop all opcom messages except those t…
    1.3.6.1.4.1.597.4.3.5.59 sCfgLocalDisksOnly 1 1 Flag which may be used to instruct NM*SysMgr to
    gather disk statistics either on all available disks
    or only on local disks. A di…
    1.3.6.1.4.1.597.4.3.5.60 sCfgCritDisksOnly 1 1 Flag which may be used to instruct NM*SysMgr to
    gather disk statistics either on all available disks
    or only on disks listed in t…