The number of processes in COM state at which excessive
compute queue (sCOMQue) traps begin to be sent. A value
of 0 disables these traps.
Configuration Variable: COMQueue
Set-requests: Take effect immediately
Changes to this value are written to the sCfgFile.
Parsed from file NMSYSMGR.MIB.txt
Company: None
Module: COMTEK-VMS-NM-SYSMGR-MIB
The number of processes in COM state at which excessive
compute queue (sCOMQue) traps begin to be sent. A value
of 0 disables these traps.
Configuration Variable: COMQueue
Set-requests: Take effect immediately
Changes to this value are written to the sCfgFile.
Parsed from file COMTEK-VMS-NM-SYSMGR-MIB.mib
Module: COMTEK-VMS-NM-SYSMGR-MIB
Vendor: Comtek Services Inc.
Module: COMTEK-VMS-NM-SYSMGR-MIB
[Automatically extracted from oidview.com]
sCfgCOMQueueLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of processes in COM state at which excessive compute queue (sCOMQue) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: COMQueue Set-requests: Take effect immediately Changes to this value are written to the sCfgFile." DEFVAL { 5 } ::= { sCfg 35 }
sCfgCOMQueueLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of processes in COM state at which excessive compute queue (sCOMQue) traps begin to be sent. A value of 0 disables these traps. Configuration Variable: COMQueue Set-requests: Take effect immediately Changes to this value are written to the sCfgFile." DEFVAL { 5 } ::= { sCfg 35 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.597.4.3.5.35.0 | sCfgCOMQueueLimit | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.597.4.3.5.1 | sCfgFile | 1 | 1 | Name of the file currently being used for NM*SysMgr initialization parameters. This file is identified by the logical name COMTE… |
| 1.3.6.1.4.1.597.4.3.5.2 | sCfgLogFile | 1 | 1 | Name of the log file currently being used by NM*SysMgr. If this process is run interactively, this variable will have the value S… |
| 1.3.6.1.4.1.597.4.3.5.3 | sCfgCritFile | 1 | 1 | Name of the file currently being used to identify critical processes. This file is associated with the logical name COMTEK$SYSMGR… |
| 1.3.6.1.4.1.597.4.3.5.4 | sCfgReinitSubagent | 1 | 1 | Flag which may be set to force the NM*SysMgr Subagent to reinitialize. Reinitialization involves resetting the process configura… |
| 1.3.6.1.4.1.597.4.3.5.5 | sCfgTraps | 1 | 1 | Flag which determines if any trap messages are sent to the NM*Master Agent. Setting this variable to disabled(2) disables all tr… |
| 1.3.6.1.4.1.597.4.3.5.6 | sCfgHwErrTraps | 1 | 1 | Flag which determines if hardware error traps (sHwErr) should be sent. Setting this variable to enabled(1) causes a trap to be s… |
| 1.3.6.1.4.1.597.4.3.5.7 | sCfgCpuLimit | 1 | 1 | The percentage of CPU utilization at which excessive CPU utilization (sCpuUsage) traps begin to be sent. A value of 0 disables th… |
| 1.3.6.1.4.1.597.4.3.5.8 | sCfgIntLimit | 1 | 1 | The percentage of interrupt CPU utilization at which excessive interrupt utilization (sIntUsage) traps begin to be sent. A value… |
| 1.3.6.1.4.1.597.4.3.5.9 | sCfgDskOps | 1 | 1 | The threshold at which excessive disk busy traps (sDskOpSec) begin to be sent. This value is expressed in terms of disk operatio… |
| 1.3.6.1.4.1.597.4.3.5.10 | sCfgDskLimit | 1 | 1 | The percentage of disk space utilization at which excessive disk utilization (sDskFull) traps begin to be sent. If this variable… |
| 1.3.6.1.4.1.597.4.3.5.11 | sCfgPgLimit | 1 | 1 | The percentage of page file utilization at which excessive page file utilization (sPgFull) traps begin to be sent. A value of 0 d… |
| 1.3.6.1.4.1.597.4.3.5.12 | sCfgSwpLimit | 1 | 1 | The percentage of swap file utilization at which excessive swap file utilization (sSwpFull) traps begin to be sent. A value of 0 … |
| 1.3.6.1.4.1.597.4.3.5.13 | sCfgPsTimer | 1 | 1 | The number of minutes between updates of the process statistics table (sPsTbl) data. A value of 0 disables gathering of process … |
| 1.3.6.1.4.1.597.4.3.5.14 | sCfgDskTimer | 1 | 1 | The number of minutes between updates of the disk table (sDskTbl) data. A value of 0 disables gathering of disk related data. Con… |
| 1.3.6.1.4.1.597.4.3.5.15 | sCfgHwErrTimer | 1 | 1 | The number of minutes between updates of the hardware error table (sHwErrTbl) data. A value of 0 disables gathering of hardware … |
| 1.3.6.1.4.1.597.4.3.5.16 | sCfgSysInfoTimer | 1 | 1 | The number of minutes between updates of the system information (sSyi) data. A value of 0 disables gathering of system informati… |
| 1.3.6.1.4.1.597.4.3.5.17 | sCfgCritTimer | 1 | 1 | The number of minutes between critical process table (sCritTbl) updates. A value of 0 disables critical process missing processi… |
| 1.3.6.1.4.1.597.4.3.5.18 | sCfgDskAlarm | 1 | 1 | The number of minutes between repeat traps for disk (sDskFull), page file (sPgFull), or swap file full (sSwpFull) conditions. A v… |
| 1.3.6.1.4.1.597.4.3.5.19 | sCfgCritAlarm | 1 | 1 | The number of minutes between repeat traps for a given critical process missing condition. Setting this variable to 0 causes onl… |
| 1.3.6.1.4.1.597.4.3.5.20 | sCfgTrapTblSize | 1 | 1 | The maximum number of traps to be retained. Traps that are retained may be resent (see sTrapResendSeqNum) unless too many subseq… |
| 1.3.6.1.4.1.597.4.3.5.21 | sCfgHostName | 1 | 1 | The name of the host that the subagent is communicating with. This is the host name where the NM*Master Agent resides. This varia… |
| 1.3.6.1.4.1.597.4.3.5.22 | sCfgAllPsData | 1 | 1 | This variable controls the amount of data that is available in the process statistics table (sPsTbl). If this flag is set to no(… |
| 1.3.6.1.4.1.597.4.3.5.23 | sCfgTimeout | 1 | 1 | This variable identifies the time-out value that is to be used by the subagent during subtree registration. If this value is set… |
| 1.3.6.1.4.1.597.4.3.5.24 | sCfgOpcomSecurity | 1 | 1 | Flag which determines if the opcom security messages are to be sent as opcom traps. Setting this variable to enabled(1) causes o… |
| 1.3.6.1.4.1.597.4.3.5.25 | sCfgControlTermProc | 1 | 1 | Flag which may be used to disable process termination by the sCfgTermProc variable. Setting this variable to enabled(1) allows t… |
| 1.3.6.1.4.1.597.4.3.5.26 | sCfgTermProc | 1 | 1 | Flag which may be used to shutdown the NM*SysMgr process. Setting this flag to true causes the NM*SysMgr process to respond to th… |
| 1.3.6.1.4.1.597.4.3.5.27 | sCfgVersion | 1 | 1 | Current version of the NM*SysMgr Subagent software. |
| 1.3.6.1.4.1.597.4.3.5.28 | sCfgUpTime | 1 | 1 | Subagent up time. |
| 1.3.6.1.4.1.597.4.3.5.29 | sCfgMaxTrapSec | 1 | 1 | This value specifies the maximum number of traps per second that may be sent. A value of zero disables trap throttling, allowing… |
| 1.3.6.1.4.1.597.4.3.5.30 | sCfgCritDsk | 1 | 1 | Name of the file currently being used to identify critical disk space and operations per second trap thresholds for individual di… |
| 1.3.6.1.4.1.597.4.3.5.31 | sCfgCritQue | 1 | 1 | Name of the file currently being used to identify queues to be monitored. This file is associated with the logical name COMTEK$S… |
| 1.3.6.1.4.1.597.4.3.5.32 | sCfgQueTimer | 1 | 1 | The number of minutes between updates of the queue statistics table (sQTbl) data. A value of 0 disables gathering of queue relat… |
| 1.3.6.1.4.1.597.4.3.5.33 | sCfgDskMinFreeBlks | 1 | 1 | The minimum number of disk blocks that must be free on a disk. When the number of free blocks on a disk drops below this level, … |
| 1.3.6.1.4.1.597.4.3.5.34 | sCfgMemLimit | 1 | 1 | The percentage of physical memory utilization at which excessive memory utilization (sMemFull) traps begin to be sent. A value of… |
| 1.3.6.1.4.1.597.4.3.5.36 | sCfgCOMOQueueLimit | 1 | 1 | The number of processes in COMO state at which excessive outswapped compute queue (sCOMOQue) traps begin to be sent. A value of 0… |
| 1.3.6.1.4.1.597.4.3.5.37 | sCfgOpcomCards | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom CARDS class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.38 | sCfgOpcomCentral | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom CENTRAL class messages. Setting this variable to disabled(2) disables NM*S… |
| 1.3.6.1.4.1.597.4.3.5.39 | sCfgOpcomCluster | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom CLUSTERclass messages. Setting this variable to disabled(2) disables NM*Sy… |
| 1.3.6.1.4.1.597.4.3.5.40 | sCfgOpcomDevices | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom DEVICES class messages. Setting this variable to disabled(2) disables NM*S… |
| 1.3.6.1.4.1.597.4.3.5.41 | sCfgOpcomDisks | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom DISKS class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.42 | sCfgOpcomLicense | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom LICENSE class messages. Setting this variable to disabled(2) disables NM*S… |
| 1.3.6.1.4.1.597.4.3.5.43 | sCfgOpcomNetwork | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom NETWORK class messages. Setting this variable to disabled(2) disables NM*S… |
| 1.3.6.1.4.1.597.4.3.5.44 | sCfgOpcomOper1 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER1 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.45 | sCfgOpcomOper2 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER2 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.46 | sCfgOpcomOper3 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER3 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.47 | sCfgOpcomOper4 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER4 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.48 | sCfgOpcomOper5 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER5 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.49 | sCfgOpcomOper6 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER6 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.50 | sCfgOpcomOper7 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER7 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.51 | sCfgOpcomOper8 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER8 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.52 | sCfgOpcomOper9 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER9 class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.53 | sCfgOpcomOper10 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER10 class messages. Setting this variable to disabled(2) disables NM*Sy… |
| 1.3.6.1.4.1.597.4.3.5.54 | sCfgOpcomOper11 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER11 class messages. Setting this variable to disabled(2) disables NM*Sy… |
| 1.3.6.1.4.1.597.4.3.5.55 | sCfgOpcomOper12 | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom OPER12 class messages. Setting this variable to disabled(2) disables NM*Sy… |
| 1.3.6.1.4.1.597.4.3.5.56 | sCfgOpcomPrinter | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom PRINTER class messages. Setting this variable to disabled(2) disables NM*S… |
| 1.3.6.1.4.1.597.4.3.5.57 | sCfgOpcomTapes | 1 | 1 | Flag which determines if NM*SysMgr will receive opcom TAPES class messages. Setting this variable to disabled(2) disables NM*Sys… |
| 1.3.6.1.4.1.597.4.3.5.58 | sCfgOpcomFilter | 1 | 1 | Flag which determines if NM*SysMgr will drop opcom messages that match filter criteria or drop all opcom messages except those t… |
| 1.3.6.1.4.1.597.4.3.5.59 | sCfgLocalDisksOnly | 1 | 1 | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on local disks. A di… |
| 1.3.6.1.4.1.597.4.3.5.60 | sCfgCritDisksOnly | 1 | 1 | Flag which may be used to instruct NM*SysMgr to gather disk statistics either on all available disks or only on disks listed in t… |