tmnxDS3ChannelMDLMessageType configures the type of MDL message that
is transmitted over the DS3 interface. If the value of this object is
set to 'none', MDL messages are not transmitted.
ds3Path(0) - Enables transmission of the MDL path message.
An MDL path message, as defined by ANSI T1.107, is
distinguished from idle and test signal messages in
that it contains a facility identification code as its
final data element.
idleSignal(1) - Enables transmission of the MDL idle signal message.
An MDL idle signal message, as defined by ANSI T1.107,
is distinguished from path and test signal messages in
that it contains a port number as its final data
element.
testSignal(2) - Enables transmission of the MDL test signal message.
An MDL test signal message, as defined by ANSI T1.107,
is distinguished from path and idle signal messages in
that it contains a generator number as its final data
element.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxDS3ChannelMDLMessageType OBJECT-TYPE SYNTAX BITS { none (0), ds3Path (1), idleSignal (2), testSignal (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this object is set to 'none', MDL messages are not transmitted. ds3Path(0) - Enables transmission of the MDL path message. An MDL path message, as defined by ANSI T1.107, is distinguished from idle and test signal messages in that it contains a facility identification code as its final data element. idleSignal(1) - Enables transmission of the MDL idle signal message. An MDL idle signal message, as defined by ANSI T1.107, is distinguished from path and test signal messages in that it contains a port number as its final data element. testSignal(2) - Enables transmission of the MDL test signal message. An MDL test signal message, as defined by ANSI T1.107, is distinguished from path and idle signal messages in that it contains a generator number as its final data element." DEFVAL { { none } } ::= { tmnxDS3ChannelEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1 | tmnxDS3ChannelRowStatus | 0 | 0 | tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manag… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2 | tmnxDS3ChannelType | 0 | 0 | The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3 | tmnxDS3ChannelFraming | 0 | 0 | The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4 | tmnxDS3ChannelClockSource | 0 | 0 | tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a cloc… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5 | tmnxDS3ChannelChannelized | 0 | 0 | tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'n… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6 | tmnxDS3ChannelSubrateCSUMode | 0 | 0 | tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subr… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7 | tmnxDS3ChannelSubrate | 0 | 0 | None |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 | tmnxDS3ChannelIdleCycleFlags | 0 | 0 | tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HD… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 | tmnxDS3ChannelLoopback | 0 | 0 | tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOf… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 | tmnxDS3ChannelBitErrorInsertionRate | 0 | 0 | tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate).… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 | tmnxDS3ChannelBERTPattern | 0 | 0 | tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 | tmnxDS3ChannelBERTDuration | 0 | 0 | tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 | tmnxDS3ChannelMDLEicString | 0 | 0 | tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 | tmnxDS3ChannelMDLLicString | 0 | 0 | tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 | tmnxDS3ChannelMDLFicString | 0 | 0 | tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 | tmnxDS3ChannelMDLUnitString | 0 | 0 | tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 | tmnxDS3ChannelMDLPfiString | 0 | 0 | tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 | tmnxDS3ChannelMDLPortString | 0 | 0 | tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 | tmnxDS3ChannelMDLGenString | 0 | 0 | tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 | tmnxDS3ChannelFEACLoopRespond | 0 | 0 | When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 | tmnxDS3ChannelCRC | 0 | 0 | The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit C… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 | tmnxDS3ChannelMTU | 0 | 0 | The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmit… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 | tmnxDS3ChannelOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 | tmnxDS3ChannelReportAlarm | 0 | 0 | The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm ind… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 | tmnxDS3ChannelReportAlarmStatus | 0 | 0 | The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 | tmnxDS3ChannelLastChangeTime | 0 | 0 | The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmn… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 | tmnxDS3ChannelInFEACLoop | 0 | 0 | tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 | tmnxDS3ChannelMDLMonPortString | 0 | 0 | tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 | tmnxDS3ChannelMDLMonGenString | 0 | 0 | tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 | tmnxDS3ChannelBERTOperStatus | 0 | 0 | tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 | tmnxDS3ChannelBERTSynched | 0 | 0 | tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 | tmnxDS3ChannelBERTErrors | 0 | 0 | tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBE… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 | tmnxDS3ChannelBERTTotalBits | 0 | 0 | tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT h… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 | tmnxDS3ChannelScramble | 0 | 0 | When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the sa… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 | tmnxDS3ChannelAcctPolicyId | 0 | 0 | The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 | tmnxDS3ChannelCollectStats | 0 | 0 | The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the netwo… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 | tmnxDS3ChannelClockSyncState | 0 | 0 | The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'ada… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 | tmnxDS3ChannelClockMasterPortId | 0 | 0 | The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSo… |