tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU)
compatibility mode to interoperate with existing DS3 subrate
standards.
This configuration applies only for a non-channelized DS3.
Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets
the value of tmnxDS3ChannelScramble to 'false'.
Changing the value of tmnxDS3ChannelSubrateCSUMode
resets the value of tmnxDS3ChannelSubrate to default for the mode if
tmnxDS3ChannelSubrate is not provided.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxDS3ChannelSubrateCSUMode OBJECT-TYPE SYNTAX INTEGER { notUsed (0), digital-link (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU) compatibility mode to interoperate with existing DS3 subrate standards. This configuration applies only for a non-channelized DS3. Changing the value of tmnxDS3ChannelSubrateCSUMode to notUsed resets the value of tmnxDS3ChannelScramble to 'false'. Changing the value of tmnxDS3ChannelSubrateCSUMode resets the value of tmnxDS3ChannelSubrate to default for the mode if tmnxDS3ChannelSubrate is not provided." DEFVAL { notUsed } ::= { tmnxDS3ChannelEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1 | tmnxDS3ChannelRowStatus | 0 | 0 | tmnxDS3ChannelRowStatus controls the creation and deletion of row entries in the tmnxDS3ChannelTable. For row creation, the manag… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2 | tmnxDS3ChannelType | 0 | 0 | The value of tmnxDS3ChannelType indicates whether the channel is in DS3 or E3 mode. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3 | tmnxDS3ChannelFraming | 0 | 0 | The value of tmnxDS3ChannelFraming indicates the type of framing associated with the DS3 channel. If tmnxDS3ChannelType is set to… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4 | tmnxDS3ChannelClockSource | 0 | 0 | tmnxDS3ChannelClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed'), or from a cloc… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5 | tmnxDS3ChannelChannelized | 0 | 0 | tmnxDS3ChannelChannelized is used to create sub-channels of type 'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'n… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.7 | tmnxDS3ChannelSubrate | 0 | 0 | None |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 | tmnxDS3ChannelIdleCycleFlags | 0 | 0 | tmnxDS3ChannelIdleCycleFlags configures the value that the DS3 port transmits during idle cycle. The default value applies to HD… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 | tmnxDS3ChannelLoopback | 0 | 0 | tmnxDS3ChannelLoopback is used to put the channel into a loopback mode. The value of tmnxPortAdminStatus should be set to 'outOf… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 | tmnxDS3ChannelBitErrorInsertionRate | 0 | 0 | tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a BERT test. The number of error corresponds to 10^(-rate).… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 | tmnxDS3ChannelBERTPattern | 0 | 0 | tmnxDS3ChannelBERTPattern indicates the pattern used for the Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 | tmnxDS3ChannelBERTDuration | 0 | 0 | tmnxDS3ChannelBERTDuration is used to set the duration of the BERT test. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 | tmnxDS3ChannelMDLEicString | 0 | 0 | tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 | tmnxDS3ChannelMDLLicString | 0 | 0 | tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 | tmnxDS3ChannelMDLFicString | 0 | 0 | tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 | tmnxDS3ChannelMDLUnitString | 0 | 0 | tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 | tmnxDS3ChannelMDLPfiString | 0 | 0 | tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in the Message Data Link (MDL) Path message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 | tmnxDS3ChannelMDLPortString | 0 | 0 | tmnxDS3ChannelMDLPortString configures the port number string sent in the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 | tmnxDS3ChannelMDLGenString | 0 | 0 | tmnxDS3ChannelMDLGenString configures the generator number string sent in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20 | tmnxDS3ChannelMDLMessageType | 0 | 0 | tmnxDS3ChannelMDLMessageType configures the type of MDL message that is transmitted over the DS3 interface. If the value of this… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 | tmnxDS3ChannelFEACLoopRespond | 0 | 0 | When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel is enabled to respond to remote loop signals. When it has… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 | tmnxDS3ChannelCRC | 0 | 0 | The value of tmnxDS3ChannelCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit C… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 | tmnxDS3ChannelMTU | 0 | 0 | The size of the largest packet which can be sent/received on the port, specified in octets. For ports that are used for transmit… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 | tmnxDS3ChannelOperMTU | 0 | 0 | The negotiated size of the largest packet which can be sent on the channel, specified in octets. For channels that are used for … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 | tmnxDS3ChannelReportAlarm | 0 | 0 | The value of tmnxDS3ChannelReportAlarm determines when and if to generate notifications for this channel: ais - Reports alarm ind… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 | tmnxDS3ChannelReportAlarmStatus | 0 | 0 | The value of tmnxDS3ChannelReportAlarmStatus indicates the current alarms on this port. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 | tmnxDS3ChannelLastChangeTime | 0 | 0 | The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the tmn… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 | tmnxDS3ChannelInFEACLoop | 0 | 0 | tmnxDS3ChannelInFEACLoop indicates whether the remote end has put this channel in FEAC(Far End Alarm Control) loopback. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 | tmnxDS3ChannelMDLMonPortString | 0 | 0 | tmnxDS3ChannelMDLMonPortString indicates the port number string received in the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 | tmnxDS3ChannelMDLMonGenString | 0 | 0 | tmnxDS3ChannelMDLMonGenString indicates the generator number string received in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 | tmnxDS3ChannelBERTOperStatus | 0 | 0 | tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test as specified by TmnxDSXBertOperStatus. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 | tmnxDS3ChannelBERTSynched | 0 | 0 | tmnxDS3ChannelBERTSynched is the number of seconds for which the BERT hardware was synchronized. This will be less than or equal… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 | tmnxDS3ChannelBERTErrors | 0 | 0 | tmnxDS3ChannelBERTErrors is the number of bit errors detected during the last BERT test. It is valid only after tmnxDS3ChannelBE… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 | tmnxDS3ChannelBERTTotalBits | 0 | 0 | tmnxDS3ChannelBERTTotalBits is the total number of bits received during the last BERT test. Bits are only counted when the BERT h… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 | tmnxDS3ChannelScramble | 0 | 0 | When tmnxDS3ChannelScramble indicates whether scrambling is enabled on this channel. Both ends of the connection must use the sa… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 | tmnxDS3ChannelAcctPolicyId | 0 | 0 | The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting policy to use for the ds3 channel. Accounting policies … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 | tmnxDS3ChannelCollectStats | 0 | 0 | The value of tmnxDS3ChannelCollectStats specifies whether or not the collection of accounting and statistical data for the netwo… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 | tmnxDS3ChannelClockSyncState | 0 | 0 | The value of tmnxDS3ChannelClockSyncState indicates the current clock synchronization state if tmnxDS3ChannelClockSource is 'ada… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 | tmnxDS3ChannelClockMasterPortId | 0 | 0 | The value of tmnxDS3ChannelClockMasterPortId indicates the current clock synchronization master port id if tmnxDS3ChannelClockSo… |