| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.1 |
tmnxDS3ChannelRowStatus | 0 | 0 |
tmnxDS3ChannelRowStatus controls the creation and deletion of
row entries in the tmnxDS3ChannelTable.
For row creation, the manag… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.2 |
tmnxDS3ChannelType | 0 | 0 |
The value of tmnxDS3ChannelType indicates whether the channel is
in DS3 or E3 mode. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.3 |
tmnxDS3ChannelFraming | 0 | 0 |
The value of tmnxDS3ChannelFraming indicates the type of framing
associated with the DS3 channel.
If tmnxDS3ChannelType is set to… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.4 |
tmnxDS3ChannelClockSource | 0 | 0 |
tmnxDS3ChannelClockSource configures the clock for transmitted data
from either the internal clock ('nodeTimed'), or from a cloc… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.5 |
tmnxDS3ChannelChannelized | 0 | 0 |
tmnxDS3ChannelChannelized is used to create sub-channels of type
'ds1' or 'e1' or 'j1' on the interface. Setting the value to 'n… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.6 |
tmnxDS3ChannelSubrateCSUMode | 0 | 0 |
tmnxDS3ChannelSubrateCSUMode configures the channel service unit (CSU)
compatibility mode to interoperate with existing DS3 subr… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 |
tmnxDS3ChannelIdleCycleFlags | 0 | 0 |
tmnxDS3ChannelIdleCycleFlags configures the value that the
DS3 port transmits during idle cycle.
The default value applies to HD… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 |
tmnxDS3ChannelLoopback | 0 | 0 |
tmnxDS3ChannelLoopback is used to put the channel into a loopback mode.
The value of tmnxPortAdminStatus should be set to 'outOf… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 |
tmnxDS3ChannelBitErrorInsertionRate | 0 | 0 |
tmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate).… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 |
tmnxDS3ChannelBERTPattern | 0 | 0 |
tmnxDS3ChannelBERTPattern indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration
… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 |
tmnxDS3ChannelBERTDuration | 0 | 0 |
tmnxDS3ChannelBERTDuration is used to set the duration of the
BERT test. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 |
tmnxDS3ChannelMDLEicString | 0 | 0 |
tmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the
Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 |
tmnxDS3ChannelMDLLicString | 0 | 0 |
tmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the
Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 |
tmnxDS3ChannelMDLFicString | 0 | 0 |
tmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the
Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 |
tmnxDS3ChannelMDLUnitString | 0 | 0 |
tmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the
Message Data Link (MDL). |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 |
tmnxDS3ChannelMDLPfiString | 0 | 0 |
tmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in
the Message Data Link (MDL) Path message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 |
tmnxDS3ChannelMDLPortString | 0 | 0 |
tmnxDS3ChannelMDLPortString configures the port number string sent in
the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 |
tmnxDS3ChannelMDLGenString | 0 | 0 |
tmnxDS3ChannelMDLGenString configures the generator number string
sent in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20 |
tmnxDS3ChannelMDLMessageType | 0 | 0 |
tmnxDS3ChannelMDLMessageType configures the type of MDL message that
is transmitted over the DS3 interface. If the value of this… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 |
tmnxDS3ChannelFEACLoopRespond | 0 | 0 |
When tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 |
tmnxDS3ChannelCRC | 0 | 0 |
The value of tmnxDS3ChannelCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
C… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 |
tmnxDS3ChannelMTU | 0 | 0 |
The size of the largest packet which can be sent/received
on the port, specified in octets. For ports that
are used for transmit… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 |
tmnxDS3ChannelOperMTU | 0 | 0 |
The negotiated size of the largest packet which can be sent on
the channel, specified in octets. For channels that are used
for … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 |
tmnxDS3ChannelReportAlarm | 0 | 0 |
The value of tmnxDS3ChannelReportAlarm determines when and if to
generate notifications for this channel:
ais - Reports alarm ind… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 |
tmnxDS3ChannelReportAlarmStatus | 0 | 0 |
The value of tmnxDS3ChannelReportAlarmStatus indicates the current
alarms on this port. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 |
tmnxDS3ChannelLastChangeTime | 0 | 0 |
The tmnxDS3ChannelLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmn… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 |
tmnxDS3ChannelInFEACLoop | 0 | 0 |
tmnxDS3ChannelInFEACLoop indicates whether the remote end has put
this channel in FEAC(Far End Alarm Control) loopback. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 |
tmnxDS3ChannelMDLMonPortString | 0 | 0 |
tmnxDS3ChannelMDLMonPortString indicates the port number string
received in the Message Data Link (MDL) idle signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 |
tmnxDS3ChannelMDLMonGenString | 0 | 0 |
tmnxDS3ChannelMDLMonGenString indicates the generator number string
received in the Message Data Link (MDL) test signal message. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 |
tmnxDS3ChannelBERTOperStatus | 0 | 0 |
tmnxDS3ChannelBERTOperStatus indicates the status of the BERT test
as specified by TmnxDSXBertOperStatus. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 |
tmnxDS3ChannelBERTSynched | 0 | 0 |
tmnxDS3ChannelBERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 |
tmnxDS3ChannelBERTErrors | 0 | 0 |
tmnxDS3ChannelBERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS3ChannelBE… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 |
tmnxDS3ChannelBERTTotalBits | 0 | 0 |
tmnxDS3ChannelBERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT
h… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 |
tmnxDS3ChannelScramble | 0 | 0 |
When tmnxDS3ChannelScramble indicates whether scrambling
is enabled on this channel. Both ends of the connection
must use the sa… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 |
tmnxDS3ChannelAcctPolicyId | 0 | 0 |
The value of tmnxDS3ChannelAcctPolicyId specifies an existing accounting
policy to use for the ds3 channel. Accounting policies … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 |
tmnxDS3ChannelCollectStats | 0 | 0 |
The value of tmnxDS3ChannelCollectStats specifies whether or not the
collection of accounting and statistical data for the netwo… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 |
tmnxDS3ChannelClockSyncState | 0 | 0 |
The value of tmnxDS3ChannelClockSyncState indicates the current clock
synchronization state if tmnxDS3ChannelClockSource is 'ada… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 |
tmnxDS3ChannelClockMasterPortId | 0 | 0 |
The value of tmnxDS3ChannelClockMasterPortId indicates the current
clock synchronization master port id if tmnxDS3ChannelClockSo… |