tmnxSonetSingleFiber is used to enable/disable packet gathering and
redirection of IP packets from a single fiber on RX port of the
SONET interface and redistribute packets to other interfaces
through either state routes or policy-based forwarding.
Parsed from file TIMETRA-PORT-MIB.mib
Module: TIMETRA-PORT-MIB
tmnxSonetSingleFiber OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "tmnxSonetSingleFiber is used to enable/disable packet gathering and redirection of IP packets from a single fiber on RX port of the SONET interface and redistribute packets to other interfaces through either state routes or policy-based forwarding." DEFVAL { false } ::= { tmnxSonetEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.1 | tmnxSonetSpeed | 0 | 0 | The rate of this optical facility. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.2 | tmnxSonetClockSource | 0 | 0 | tmnxSonetClockSource configures the clock for transmitted data from either the internal clock ('nodeTimed') or from a clock reco… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.3 | tmnxSonetFraming | 0 | 0 | The value of tmnxSonetFraming indicates the type of framing used on this interface. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.4 | tmnxSonetReportAlarm | 0 | 0 | The value of tmnxSonetReportAlarm determines when and if to generate tmnxEqPortSonetAlarm and tmnxEqPortSonetAlarmClear notificat… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.5 | tmnxSonetBerSdThreshold | 0 | 0 | The value of tmnxSonetBerSdThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonet… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.6 | tmnxSonetBerSfThreshold | 0 | 0 | The value of tmnxSonetBerSfThreshold specifies a bit error rate (BER) threshold used to determine when to send a tmnxEqPortSonet… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.7 | tmnxSonetAps | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.8 | tmnxSonetApsAdminStatus | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.9 | tmnxSonetApsOperStatus | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.10 | tmnxSonetApsAuthKey | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.11 | tmnxSonetApsNeighborAddr | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.12 | tmnxSonetApsAdvertiseInterval | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.13 | tmnxSonetApsAdvertiseTimeLeft | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.14 | tmnxSonetApsHoldTime | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.15 | tmnxSonetApsHoldTimeLeft | 0 | 0 | Automatic Protection Switching (APS) is supported on 7x50 systems by the APS-MIB and TIMETRA-APS-MIB. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.16 | tmnxSonetLoopback | 0 | 0 | Activate a loopback on the SONET port. The SONET port must be in a shutdown state to activate any type of loopback. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.17 | tmnxSonetReportAlarmStatus | 0 | 0 | The bits in this object are used for indicating the alarms. The bits are explained as follows: loc(1) Indicates a loss of cl… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.18 | tmnxSonetSectionTraceMode | 0 | 0 | The tmnxSonetSectionTraceMode variable along with the tmnxSonetJ0String object determines the contents of the section trace bytes… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.19 | tmnxSonetJ0String | 0 | 0 | The tmnxSonetJ0String is used with the tmnxSonetSectionTraceMode variable to determine the contents of the j0 byte in the SONET … |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.20 | tmnxSonetMonS1Byte | 0 | 0 | The tmnxSonetMonS1Byte variable reports the Synchronization Status Message from the S1 byte in the Line Overhead Header. A value… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.21 | tmnxSonetMonJ0String | 0 | 0 | The tmnxSonetMonJ0String variable reports the contents of the j0 byte in the SONET Section Header. |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.22 | tmnxSonetMonK1Byte | 0 | 0 | The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K1 byte in the SONET L… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.23 | tmnxSonetMonK2Byte | 0 | 0 | The tmnxSonetMonK1Byte variable reports the Automatic Protection Switching(APS) signalling status from the K2 byte in the SONET L… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.25 | tmnxSonetHoldTimeUp | 0 | 0 | The value of tmnxSonetHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting e… |
| 1.3.6.1.4.1.6527.3.1.2.2.4.5.1.26 | tmnxSonetHoldTimeDown | 0 | 0 | The value of tmnxSonetHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporti… |