When the value of this object is 'true'
the transport LSP's are signalled by LDP,
as opposed to being provisioned static or
RSVP-signalled LSP's. This object applies
only to MPLS SDP's.
Parsed from file TIMETRA-SDP-MIB.mib
Module: TIMETRA-SDP-MIB
sdpLdpEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the transport LSP's are signalled by LDP, as opposed to being provisioned static or RSVP-signalled LSP's. This object applies only to MPLS SDP's." DEFVAL { false } ::= { sdpInfoEntry 23 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.1 | sdpId | 0 | 0 | SDP identifier. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.2 | sdpRowStatus | 0 | 0 | This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. T… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.3 | sdpDelivery | 0 | 0 | This object specifies the type of delivery used by this SDP: e.g. GRE or MPLS. The value of this object must be specified when th… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.4 | sdpFarEndIpAddress | 0 | 0 | This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. The value of this object mu… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.5 | sdpLspList | 0 | 0 | When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR de… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.6 | sdpDescription | 0 | 0 | Generic information about this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.7 | sdpLabelSignaling | 0 | 0 | This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.8 | sdpAdminStatus | 0 | 0 | The desired state of this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.9 | sdpOperStatus | 0 | 0 | The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive o… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.10 | sdpAdminPathMtu | 0 | 0 | This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end … |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.11 | sdpOperPathMtu | 0 | 0 | This object specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end E… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.12 | sdpKeepAliveAdminStatus | 0 | 0 | This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.13 | sdpKeepAliveOperStatus | 0 | 0 | The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.14 | sdpKeepAliveHelloTime | 0 | 0 | This object specifies how often the SDP Echo Request messages are transmitted on this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.15 | sdpKeepAliveMaxDropCount | 0 | 0 | This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-aliv… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.16 | sdpKeepAliveHoldDownTime | 0 | 0 | This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.17 | sdpLastMgmtChange | 0 | 0 | The value of sysUpTime at the time of the most recent management-initiated change to this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.18 | sdpKeepAliveHelloMessageLength | 0 | 0 | This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates tha… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.19 | sdpKeepAliveNumHelloRequestMessages | 0 | 0 | The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.20 | sdpKeepAliveNumHelloResponseMessages | 0 | 0 | The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.21 | sdpKeepAliveNumLateHelloResponseMessages | 0 | 0 | The number of SDP Echo Response messages received after the corresponding Request timeout timer expired. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.22 | sdpKeepAliveHelloRequestTimeout | 0 | 0 | The number of seconds to wait for an SDP Echo Response message before declaring a timeout. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.24 | sdpVlanVcEtype | 0 | 0 | This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.25 | sdpAdvertisedVllMtuOverride | 0 | 0 | When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is b… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.26 | sdpOperFlags | 0 | 0 | This object specifies all the conditions that affect the operating status of this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.27 | sdpLastStatusChange | 0 | 0 | The value of sysUpTime at the time of the most recent operating status change to this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.28 | sdpMvplsMgmtService | 0 | 0 | The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this … |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.29 | sdpMvplsMgmtSdpBndId | 0 | 0 | The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling … |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.30 | sdpCollectAcctStats | 0 | 0 | The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the val… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.31 | sdpAccountingPolicyId | 0 | 0 | The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indic… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.32 | sdpClassFwdingEnabled | 0 | 0 | The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', cla… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.33 | sdpClassFwdingDefaultLsp | 0 | 0 | The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on th… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.34 | sdpClassFwdingMcLsp | 0 | 0 | The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.35 | sdpMetric | 0 | 0 | The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multipl… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.36 | sdpAutoSdp | 0 | 0 | The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.37 | sdpSnmpAllowed | 0 | 0 | The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.38 | sdpPBBEtype | 0 | 0 | This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridgi… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.39 | sdpBandwidthBookingFactor | 0 | 0 | sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.40 | sdpOperBandwidth | 0 | 0 | The value of sdpOperBandwidth indicates the operational Bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The val… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.41 | sdpAvailableBandwidth | 0 | 0 | The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.42 | sdpMaxBookableBandwidth | 0 | 0 | The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of s… |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.43 | sdpBookedBandwidth | 0 | 0 | The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings. |
1.3.6.1.4.1.6527.3.1.2.4.4.3.1.44 | sdpCreationOrigin | 0 | 0 | The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP. |