This object specifies the IP address of the
remote end of the GRE or MPLS tunnel defined
by this SDP. The value of this object must
be set for the row to become 'active', and
can only be changed while the admin status
of the SDP is 'down'.
Parsed from file TIMETRA-SDP-MIB.mib
Module: TIMETRA-SDP-MIB
sdpFarEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the IP address of the remote end of the GRE or MPLS tunnel defined by this SDP. The value of this object must be set for the row to become 'active', and can only be changed while the admin status of the SDP is 'down'." ::= { sdpInfoEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.1 | sdpId | 0 | 0 | SDP identifier. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.2 | sdpRowStatus | 0 | 0 | This object indicates the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. T… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.3 | sdpDelivery | 0 | 0 | This object specifies the type of delivery used by this SDP: e.g. GRE or MPLS. The value of this object must be specified when th… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.5 | sdpLspList | 0 | 0 | When the SDP delivery specified by sdpDelivery is 'mpls', this object specifies the list of LSPs used to reach the far-end ESR de… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.6 | sdpDescription | 0 | 0 | Generic information about this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.7 | sdpLabelSignaling | 0 | 0 | This object specifies the signaling protocol used to obtain the ingress and egress labels used in frames transmitted and received… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.8 | sdpAdminStatus | 0 | 0 | The desired state of this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.9 | sdpOperStatus | 0 | 0 | The operating state of this SDP. The value 'notAlive' is valid only when keep-alive is enabled, and it means that the keep-alive o… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.10 | sdpAdminPathMtu | 0 | 0 | This object specifies the desired largest service frame size (in octets) that can be transmitted through this SDP to the far-end … |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.11 | sdpOperPathMtu | 0 | 0 | This object specifies the actual largest service frame size (in octets) that can be transmitted through this SDP to the far-end E… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.12 | sdpKeepAliveAdminStatus | 0 | 0 | This object is used to enable or disable the keep-alive protocol used to determine the operating status of this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.13 | sdpKeepAliveOperStatus | 0 | 0 | The current status of the keep-alive protocol. The value 'alive' indicates that the far-end ESR is replying the SDP Echo Requests… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.14 | sdpKeepAliveHelloTime | 0 | 0 | This object specifies how often the SDP Echo Request messages are transmitted on this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.15 | sdpKeepAliveMaxDropCount | 0 | 0 | This object specifies the maximum number of consecutive SDP Echo Request messages that can be unacknowledged before the keep-aliv… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.16 | sdpKeepAliveHoldDownTime | 0 | 0 | This object specifies the amount of time to wait before the keep-alive operating status is eligible to enter the 'alive' state. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.17 | sdpLastMgmtChange | 0 | 0 | The value of sysUpTime at the time of the most recent management-initiated change to this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.18 | sdpKeepAliveHelloMessageLength | 0 | 0 | This object specifies the length of the SDP Echo Request messages transmitted on this SDP. The default value of zero indicates tha… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.19 | sdpKeepAliveNumHelloRequestMessages | 0 | 0 | The number of SDP Echo Request messages transmitted since the keep-alive was administratively enabled or the counter was cleared. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.20 | sdpKeepAliveNumHelloResponseMessages | 0 | 0 | The number of SDP Echo Response messages received since the keep-alive was administratively enabled or the counter was cleared. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.21 | sdpKeepAliveNumLateHelloResponseMessages | 0 | 0 | The number of SDP Echo Response messages received after the corresponding Request timeout timer expired. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.22 | sdpKeepAliveHelloRequestTimeout | 0 | 0 | The number of seconds to wait for an SDP Echo Response message before declaring a timeout. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.23 | sdpLdpEnabled | 0 | 0 | When the value of this object is 'true' the transport LSP's are signalled by LDP, as opposed to being provisioned static or RSVP-s… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.24 | sdpVlanVcEtype | 0 | 0 | This object specifies the Ethertype used in frames sent out this SDP, when the VC type is vlan. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.25 | sdpAdvertisedVllMtuOverride | 0 | 0 | When the value of this object is 'true' the advertised MTU of a VLL spoke SDP bind includes the 14-byte L2 header, so that it is b… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.26 | sdpOperFlags | 0 | 0 | This object specifies all the conditions that affect the operating status of this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.27 | sdpLastStatusChange | 0 | 0 | The value of sysUpTime at the time of the most recent operating status change to this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.28 | sdpMvplsMgmtService | 0 | 0 | The value of sdpMvplsMgmtService indicates the service Id of the service where the STP instance is running that is managing this … |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.29 | sdpMvplsMgmtSdpBndId | 0 | 0 | The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the mVPLS instance specified in sdpMvplsMgmtService is controlling … |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.30 | sdpCollectAcctStats | 0 | 0 | The value of the object sdpCollectAcctStats specifies whether the agent collects accounting statistics for this SDP. When the val… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.31 | sdpAccountingPolicyId | 0 | 0 | The value of sdpAccountingPolicyId specifies the policy to use to collect accounting statistics on this SDP. The value zero indic… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.32 | sdpClassFwdingEnabled | 0 | 0 | The value of sdpClassFwdingEnabled specifies the admin state of class-based forwarding on this SDP. When the value is 'true', cla… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.33 | sdpClassFwdingDefaultLsp | 0 | 0 | The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is used as a default when class-based forwarding is enabled on th… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.34 | sdpClassFwdingMcLsp | 0 | 0 | The value of sdpClassFwdingMcLsp specifies the LSP ID that all multicast traffic will be forwarded on when class-based forwarding… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.35 | sdpMetric | 0 | 0 | The value of sdpMetric specifies the metric to be used within the Tunnel Table Manager for decision making purposes. When multipl… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.36 | sdpAutoSdp | 0 | 0 | The value of sdpAutoSdp indicates whether this is an Auto generated SDP from RADIUS discovery or BGP auto-discovery. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.37 | sdpSnmpAllowed | 0 | 0 | The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.38 | sdpPBBEtype | 0 | 0 | This object specifies the Ethertype used in frames sent out on this SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridgi… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.39 | sdpBandwidthBookingFactor | 0 | 0 | sdpBandwidthBookingFactor is used to calculate the max SDP available bandwidth. The value of sdpBandwidthBookingFactor specifies… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.40 | sdpOperBandwidth | 0 | 0 | The value of sdpOperBandwidth indicates the operational Bandwidth in kilo-bits per seconds (Kbps) available for this SDP. The val… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.41 | sdpAvailableBandwidth | 0 | 0 | The value of sdpAvailableBandwidth indicates the Bandwidth that is still free for booking by the SDP bindings on the SDP. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.42 | sdpMaxBookableBandwidth | 0 | 0 | The value of sdpMaxBookableBandwidth indicates the max Bandwidth that the SDP has for booking by the SDP bindings. The value of s… |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.43 | sdpBookedBandwidth | 0 | 0 | The value of sdpBookedBandwidth indicates the SDP Bandwidth that has been booked by the SDP bindings. |
| 1.3.6.1.4.1.6527.3.1.2.4.4.3.1.44 | sdpCreationOrigin | 0 | 0 | The value of sdpCreationOrigin indicates the protocol or mechanism which created this SDP. |