The value of vRtrMplsGeneralSrlgFrrStrict specifies whether
to associate the LSP with a bypass or signal a detour if a
bypass or detour satisfies all other constraints except the SRLG
constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is
'true' and a path that meets SRLG constraints is not found, the
bypass or detour is not setup. If this value is set to 'true'
when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr
is set to 'true' also.
By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsGeneralSrlgFrrStrict OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or detour satisfies all other constraints except the SRLG constraints. When the value of vRtrMplsGeneralSrlgFrrStrict is 'true' and a path that meets SRLG constraints is not found, the bypass or detour is not setup. If this value is set to 'true' when vRtrMplsGeneralSrlgFrr is set to 'false', vRtrMplsGeneralSrlgFrr is set to 'true' also. By default, the value of vRtrMplsGeneralSrlgFrrStrict is 'false'." DEFVAL { false } ::= { vRtrMplsGeneralEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.6527.3.1.2.6.7.1.1 | vRtrMplsGeneralLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
1.3.6.1.4.1.6527.3.1.2.6.7.1.2 | vRtrMplsGeneralAdminState | 0 | 0 | When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. Wh… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.3 | vRtrMplsGeneralOperState | 0 | 0 | vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router. |
1.3.6.1.4.1.6527.3.1.2.6.7.1.4 | vRtrMplsGeneralPropagateTtl | 0 | 0 | When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label an… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.5 | vRtrMplsGeneralTE | 0 | 0 | The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance. |
1.3.6.1.4.1.6527.3.1.2.6.7.1.6 | vRtrMplsGeneralNewLspIndex | 0 | 0 | This object is used to assign values to vRtrMplsLspIndex as described in 'Textual Conventions for SNMPv2'. The network manager r… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.7 | vRtrMplsGeneralOptimizeTimer | 0 | 0 | The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimiz… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.8 | vRtrMplsGeneralFRObject | 0 | 0 | The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or with… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.9 | vRtrMplsGeneralResignalTimer | 0 | 0 | The value of vRtrMplsGeneralResignalTimer specifies the value for the LSP resignal timer, that is the time, in minutes, the softw… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.10 | vRtrMplsGeneralHoldTimer | 0 | 0 | The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming i… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.11 | vRtrMplsGeneralDynamicBypass | 0 | 0 | The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnel… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.12 | vRtrMplsGeneralNextResignal | 0 | 0 | The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expir… |
1.3.6.1.4.1.6527.3.1.2.6.7.1.13 | vRtrMplsGeneralOperDownReason | 0 | 0 | The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down. |
1.3.6.1.4.1.6527.3.1.2.6.7.1.14 | vRtrMplsGeneralSrlgFrr | 0 | 0 | The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation o… |