The value of vRtrMplsGeneralOptimizeTimer specifies the time, in
seconds, the software will wait before attempting to re-optimize
the LSPs.
When CSPF is enabled, changes in the network topology may cause
the existing path of a loose-hop LSP to become sub-optimal. Such
LSPs can be re-optimized and re-routed through more optimal paths
by recalculating the path for the LSP at periodic intervals. This
interval is controlled by the optimize timer.
A value of 0 indicates that optimization has been disabled.
The value for vRtrMplsGeneralOptimizeTimer is by default inherited
by all LSPs and their paths.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsGeneralOptimizeTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimize the LSPs. When CSPF is enabled, changes in the network topology may cause the existing path of a loose-hop LSP to become sub-optimal. Such LSPs can be re-optimized and re-routed through more optimal paths by recalculating the path for the LSP at periodic intervals. This interval is controlled by the optimize timer. A value of 0 indicates that optimization has been disabled. The value for vRtrMplsGeneralOptimizeTimer is by default inherited by all LSPs and their paths." DEFVAL { 0 } ::= { vRtrMplsGeneralEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.1 | vRtrMplsGeneralLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.2 | vRtrMplsGeneralAdminState | 0 | 0 | When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. Wh… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.3 | vRtrMplsGeneralOperState | 0 | 0 | vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.4 | vRtrMplsGeneralPropagateTtl | 0 | 0 | When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label an… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.5 | vRtrMplsGeneralTE | 0 | 0 | The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.6 | vRtrMplsGeneralNewLspIndex | 0 | 0 | This object is used to assign values to vRtrMplsLspIndex as described in 'Textual Conventions for SNMPv2'. The network manager r… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.8 | vRtrMplsGeneralFRObject | 0 | 0 | The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or with… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.9 | vRtrMplsGeneralResignalTimer | 0 | 0 | The value of vRtrMplsGeneralResignalTimer specifies the value for the LSP resignal timer, that is the time, in minutes, the softw… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.10 | vRtrMplsGeneralHoldTimer | 0 | 0 | The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming i… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.11 | vRtrMplsGeneralDynamicBypass | 0 | 0 | The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnel… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.12 | vRtrMplsGeneralNextResignal | 0 | 0 | The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expir… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.13 | vRtrMplsGeneralOperDownReason | 0 | 0 | The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.14 | vRtrMplsGeneralSrlgFrr | 0 | 0 | The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation o… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.15 | vRtrMplsGeneralSrlgFrrStrict | 0 | 0 | The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or … |