When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs,
the ingress ESR writes the TTL of the IP packet in the label and
each transit ESR decrements the TTL in the label. At the egress
ESR the TTL value from the label is written into the IP packet.
When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress
ESR ignores the IP packet TTl and writes the value of 255 into
the label, while the egress ESR does not write the label TTL
into the IP packet. This assumes that all ESRs have been
configured to have vRtrMplsGeneralPropagateTtl set to 'false',
or this may result in unpredictable behavior.
Parsed from file TIMETRA-MPLS-MIB.mib
Module: TIMETRA-MPLS-MIB
vRtrMplsGeneralPropagateTtl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrMplsGeneralPropagateTtl is set to 'true', for all LSPs, the ingress ESR writes the TTL of the IP packet in the label and each transit ESR decrements the TTL in the label. At the egress ESR the TTL value from the label is written into the IP packet. When vRtrMplsGeneralPropagateTtl is set to 'false', the ingress ESR ignores the IP packet TTl and writes the value of 255 into the label, while the egress ESR does not write the label TTL into the IP packet. This assumes that all ESRs have been configured to have vRtrMplsGeneralPropagateTtl set to 'false', or this may result in unpredictable behavior." DEFVAL { true } ::= { vRtrMplsGeneralEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.1 | vRtrMplsGeneralLastChange | 0 | 0 | The sysUpTime when this row was last modified. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.2 | vRtrMplsGeneralAdminState | 0 | 0 | When vRtrMplsGeneralAdminState is set to 'inService', the agent attempts to enable the MPLS protocol instance on this router. Wh… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.3 | vRtrMplsGeneralOperState | 0 | 0 | vRtrMplsGeneralOperState indicates the current operating state of this MPLS protocol instance on this router. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.5 | vRtrMplsGeneralTE | 0 | 0 | The value of vRtrMplsGeneralTE specifies the type of traffic engineering used with this MPLS instance. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.6 | vRtrMplsGeneralNewLspIndex | 0 | 0 | This object is used to assign values to vRtrMplsLspIndex as described in 'Textual Conventions for SNMPv2'. The network manager r… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.7 | vRtrMplsGeneralOptimizeTimer | 0 | 0 | The value of vRtrMplsGeneralOptimizeTimer specifies the time, in seconds, the software will wait before attempting to re-optimiz… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.8 | vRtrMplsGeneralFRObject | 0 | 0 | The value of vRtrMplsGeneralFRObject specifies whether fast reroute, for LSPs using 'Facility Backup', is signalled with or with… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.9 | vRtrMplsGeneralResignalTimer | 0 | 0 | The value of vRtrMplsGeneralResignalTimer specifies the value for the LSP resignal timer, that is the time, in minutes, the softw… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.10 | vRtrMplsGeneralHoldTimer | 0 | 0 | The value of vRtrMplsGeneralHoldTimer specifies the time, in seconds, for which the ingress node holds a bit before programming i… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.11 | vRtrMplsGeneralDynamicBypass | 0 | 0 | The value of vRtrMplsGeneralDynamicBypass specifies whether dynamic bypass tunnels are enabled. By default, dynamic bypass tunnel… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.12 | vRtrMplsGeneralNextResignal | 0 | 0 | The value of vRtrMplsGeneralNextResignal indicates the time remaining, in minutes, for the vRtrMplsGeneralResignalTimer to expir… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.13 | vRtrMplsGeneralOperDownReason | 0 | 0 | The value of vRtrMplsGeneralOperDownReason indicates the reason due to which the MPLS instance is operationally down. |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.14 | vRtrMplsGeneralSrlgFrr | 0 | 0 | The value of vRtrMplsGeneralSrlgFrr specifies whether Shared Risk Link Group (SRLG) constraint will be used in the computation o… |
| 1.3.6.1.4.1.6527.3.1.2.6.7.1.15 | vRtrMplsGeneralSrlgFrrStrict | 0 | 0 | The value of vRtrMplsGeneralSrlgFrrStrict specifies whether to associate the LSP with a bypass or signal a detour if a bypass or … |