The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period.
Parsed from file RFC1407-MIB.mib
Module: RFC1407-MIB
The number of seconds that have elapsed since the
beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value.
dsx3TimeElapsed OBJECT-TYPE
SYNTAX INTEGER (0..899)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that have elapsed since the
beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the systems time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value."
View at oid-info.com
The number of seconds that have elapsed since the
beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value.
Parsed from file mib_txt_12_3_1_5.txt
Company: None
Module: ACC-MIB
The number of seconds that have elapsed since the
beginning of the near end current error-
measurement period. If, for some reason, such as
an adjustment in the system's time-of-day clock,
the current interval exceeds the maximum value,
the agent will return the maximum value.
dsx3TimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the near end current error- measurement period." ::= { dsx3ConfigEntry 3 }
dsx3TimeElapsed OBJECT-TYPE SYNTAX INTEGER(0..899) ACCESS read-only STATUS mandatory DESCRIPTION "The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { dsx3ConfigEntry 3 }
Automatically extracted from Cisco "SNMP v2 MIBs".
dsx3TimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) ACCESS read-only STATUS mandatory ::= { dsx3ConfigEntry 3 }
dsx3TimeElapsed OBJECT-TYPE SYNTAX INTEGER (0..899) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value." ::= { dsx3ConfigEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.30.5.1.1 | dsx3LineIndex | 0 | 0 | This object is the identifier of a DS3/E3 Interface on a managed device. If there is an ifEntry that is directly associated with… |
| 1.3.6.1.2.1.10.30.5.1.2 | dsx3IfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.2.1.10.30.5.1.4 | dsx3ValidIntervals | 0 | 0 | The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brou… |
| 1.3.6.1.2.1.10.30.5.1.5 | dsx3LineType | 0 | 0 | This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the… |
| 1.3.6.1.2.1.10.30.5.1.6 | dsx3LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its charac… |
| 1.3.6.1.2.1.10.30.5.1.7 | dsx3SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS3/E3 interface by the device. (These are optional for E3 in… |
| 1.3.6.1.2.1.10.30.5.1.8 | dsx3CircuitIdentifier | 0 | 0 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| 1.3.6.1.2.1.10.30.5.1.9 | dsx3LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state.… |
| 1.3.6.1.2.1.10.30.5.1.10 | dsx3LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The… |
| 1.3.6.1.2.1.10.30.5.1.11 | dsx3TransmitClockSource | 0 | 0 | The source of Transmit Clock. is derived from the recovered receive clock of another DS3 interface. |
| 1.3.6.1.2.1.10.30.5.1.12 | dsx3InvalidIntervals | 0 | 0 | The number of intervals for which no valid data is available. |
| 1.3.6.1.2.1.10.30.5.1.13 | dsx3LineLength | 0 | 0 | The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use thi… |
| 1.3.6.1.2.1.10.30.5.1.14 | dsx3LineStatusLastChange | 0 | 0 | The value of MIB II's sysUpTime object at the time this DS3/E3 entered its current line status state. If the current state was e… |
| 1.3.6.1.2.1.10.30.5.1.15 | dsx3LineStatusChangeTrapEnable | 0 | 0 | Indicates whether dsx3LineStatusChange traps should be generated for this interface. |
| 1.3.6.1.2.1.10.30.5.1.16 | dsx3LoopbackStatus | 0 | 0 | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks establi… |
| 1.3.6.1.2.1.10.30.5.1.17 | dsx3Channelization | 0 | 0 | Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized … |
| 1.3.6.1.2.1.10.30.5.1.18 | dsx3Ds1ForRemoteLoop | 0 | 0 | Indicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be lo… |