Reference record for OID 1.3.6.1.2.1.10.30.5.1.7


parent
1.3.6.1.2.1.10.30.5.1 (dsx3ConfigEntry)
node code
7
node name
dsx3SendCode
dot oid
1.3.6.1.2.1.10.30.5.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) ds3(30) dsx3ConfigTable(5) dsx3ConfigEntry(1) dsx3SendCode(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
  • /iso/org/dod/internet/mgmt/mib-2/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
  • /iso/org/dod/internet/mgmt/mib/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/ds3/dsx3ConfigTable/dsx3ConfigEntry/dsx3SendCode
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/30/5/1/7

    Description by circitor

    This variable indicates what type of code is
    being sent across the DS3/E3 interface by the
    device. (These are optional for E3 interfaces.)
    The values mean:

    dsx3SendNoCode
    sending looped or normal data

    dsx3SendLineCode
    sending a request for a line loopback

    dsx3SendPayloadCode
    sending a request for a payload loopback
    (i.e., all DS1/E1s in a DS3/E3 frame)

    dsx3SendResetCode
    sending a loopback deactivation request

    dsx3SendDS1LoopCode
    requesting to loopback a particular DS1/E1
    within a DS3/E3 frame

    dsx3SendTestPattern
    sending a test pattern.

    Parsed from file RFC1407-MIB.mib
    Module: RFC1407-MIB

    Description by cisco_v1

    This variable indicates what type of code is
    being sent across the DS3/E3 interface by the
    device. (These are optional for E3 interfaces.)
    Setting this variable causes the interface to
    begin sending the code requested.
    The values mean:

    dsx3SendNoCode
    sending looped or normal data

    dsx3SendLineCode
    sending a request for a line loopback

    dsx3SendPayloadCode
    sending a request for a payload loopback
    (i.e., all DS1/E1s in a DS3/E3 frame)

    dsx3SendResetCode
    sending a loopback deactivation request

    dsx3SendDS1LoopCode
    requesting to loopback a particular DS1/E1
    within a DS3/E3 frame. The DS1/E1 is
    indicated in dsx3Ds1ForRemoteLoop.

    dsx3SendTestPattern
    sending a test pattern.

    Description by oid_info

    dsx3SendCode OBJECT-TYPE
    SYNTAX INTEGER {
    dsx3SendNoCode(1),
    dsx3SendLineCode(2),
    dsx3SendPayloadCode(3),
    dsx3SendResetCode(4),
    dsx3SendDS1LoopCode(5),
    dsx3SendTestPattern(6)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
    "This variable indicates what type of code is
    being sent across the DS3/E3 interface by the
    device. (These are optional for E3 interfaces.)
    Setting this variable causes the interface to
    begin sending the code requested.
    The values mean:
    dsx3SendNoCode
    sending looped or normal data
    dsx3SendLineCode
    sending a request for a line loopback
    dsx3SendPayloadCode
    sending a request for a payload loopback
    (i.e., all DS1/E1s in a DS3/E3 frame)
    dsx3SendResetCode
    sending a loopback deactivation request
    dsx3SendDS1LoopCode
    requesting to loopback a particular DS1/E1
    within a DS3/E3 frame. The DS1/E1 is
    indicated in dsx3Ds1ForRemoteLoop.
    dsx3SendTestPattern
    sending a test pattern."
    View at oid-info.com

    Description by mibdepot

    This variable indicates what type of code is
    being sent across the DS3/E3 interface by the
    device. (These are optional for E3 interfaces.)
    Setting this variable causes the interface to
    begin sending the code requested.
    The values mean:

    dsx3SendNoCode
    sending looped or normal data

    dsx3SendLineCode
    sending a request for a line loopback

    dsx3SendPayloadCode
    sending a request for a payload loopback
    (i.e., all DS1/E1s in a DS3/E3 frame)

    dsx3SendResetCode
    sending a loopback deactivation request

    dsx3SendDS1LoopCode
    requesting to loopback a particular DS1/E1
    within a DS3/E3 frame. The DS1/E1 is
    indicated in dsx3Ds1ForRemoteLoop.

    dsx3SendTestPattern
    sending a test pattern.

    Parsed from file mib_txt_12_3_1_5.txt
    Company: None
    Module: ACC-MIB

    Description by cisco

    This variable indicates what type of code is
    being sent across the DS3/E3 interface by the
    device. (These are optional for E3 interfaces.)
    Setting this variable causes the interface to
    begin sending the code requested.
    The values mean:

    dsx3SendNoCode
    sending looped or normal data

    dsx3SendLineCode
    sending a request for a line loopback

    dsx3SendPayloadCode
    sending a request for a payload loopback
    (i.e., all DS1/E1s in a DS3/E3 frame)

    dsx3SendResetCode
    sending a loopback deactivation request

    dsx3SendDS1LoopCode
    requesting to loopback a particular DS1/E1
    within a DS3/E3 frame. The DS1/E1 is
    indicated in dsx3Ds1ForRemoteLoop.

    dsx3SendTestPattern
    sending a test pattern.

    Information by circitor

    dsx3SendCode OBJECT-TYPE
                 SYNTAX  INTEGER {
                         dsx3SendNoCode(1),
                         dsx3SendLineCode(2),
                         dsx3SendPayloadCode(3),
                         dsx3SendResetCode(4),
                         dsx3SendDS1LoopCode(5),
                         dsx3SendTestPattern(6)
                         }
                 ACCESS  read-write
                 STATUS  mandatory
                 DESCRIPTION
                      "This variable indicates what type of code is
                      being sent across the DS3/E3 interface by the
                      device.  (These are optional for E3 interfaces.)
                      The values mean:

                         dsx3SendNoCode
                             sending looped or normal data

                         dsx3SendLineCode
                             sending a request for a line loopback

                         dsx3SendPayloadCode
                             sending a request for a payload loopback
                             (i.e., all DS1/E1s in a DS3/E3 frame)

                         dsx3SendResetCode
                             sending a loopback deactivation request

                         dsx3SendDS1LoopCode
                             requesting to loopback a particular DS1/E1
                             within a DS3/E3 frame

                         dsx3SendTestPattern
                             sending a test pattern."
                 ::= { dsx3ConfigEntry 7 }

    Information by cisco_v1

    dsx3SendCode OBJECT-TYPE
    SYNTAX INTEGER {
        dsx3SendNoCode(1),
        dsx3SendLineCode(2),
        dsx3SendPayloadCode(3),
        dsx3SendResetCode(4),
        dsx3SendDS1LoopCode(5),
        dsx3SendTestPattern(6)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This variable indicates what type of code is
        being sent across the DS3/E3 interface by the
        device.  (These are optional for E3 interfaces.)
        Setting this variable causes the interface to
        begin sending the code requested.
        The values mean:
        
           dsx3SendNoCode
               sending looped or normal data
        
           dsx3SendLineCode
               sending a request for a line loopback
        
           dsx3SendPayloadCode
               sending a request for a payload loopback
               (i.e., all DS1/E1s in a DS3/E3 frame)
        
           dsx3SendResetCode
               sending a loopback deactivation request
        
           dsx3SendDS1LoopCode
               requesting to loopback a particular DS1/E1
               within a DS3/E3 frame.  The DS1/E1 is
               indicated in dsx3Ds1ForRemoteLoop.
        
           dsx3SendTestPattern
               sending a test pattern."
    ::= { dsx3ConfigEntry 7 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    dsx3SendCode OBJECT-TYPE
                 SYNTAX  INTEGER {
                         dsx3SendNoCode(1),
                         dsx3SendLineCode(2),
                         dsx3SendPayloadCode(3),
                         dsx3SendResetCode(4),
                         dsx3SendDS1LoopCode(5),
                         dsx3SendTestPattern(6)
                         }
                 ACCESS  read-write
                 STATUS  mandatory
                 ::= { dsx3ConfigEntry 7 }

    Information by cisco

    dsx3SendCode OBJECT-TYPE
          SYNTAX  INTEGER {
                    dsx3SendNoCode(1),
                    dsx3SendLineCode(2),
                    dsx3SendPayloadCode(3),
                    dsx3SendResetCode(4),
                    dsx3SendDS1LoopCode(5),
                    dsx3SendTestPattern(6)
                    }
          MAX-ACCESS  read-write
          STATUS  current
          DESCRIPTION
                 "This variable indicates what type of code is
                 being sent across the DS3/E3 interface by the
                 device.  (These are optional for E3 interfaces.)
                 Setting this variable causes the interface to
                 begin sending the code requested.
                 The values mean:

                    dsx3SendNoCode
                        sending looped or normal data

                    dsx3SendLineCode
                        sending a request for a line loopback

                    dsx3SendPayloadCode
                        sending a request for a payload loopback
                        (i.e., all DS1/E1s in a DS3/E3 frame)

                    dsx3SendResetCode
                        sending a loopback deactivation request

                    dsx3SendDS1LoopCode
                        requesting to loopback a particular DS1/E1
                        within a DS3/E3 frame.  The DS1/E1 is
                        indicated in dsx3Ds1ForRemoteLoop.

                    dsx3SendTestPattern
                        sending a test pattern."
          ::= { dsx3ConfigEntry 7 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (17)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.30.5.1.1 dsx3LineIndex 0 0 This object is the identifier of a DS3/E3
    Interface on a managed device. If there is an
    ifEntry that is directly associated with…
    1.3.6.1.2.1.10.30.5.1.2 dsx3IfIndex 0 0 This value for this object is equal to the
    value of ifIndex from the Interfaces table of
    MIB II (RFC 1213).
    1.3.6.1.2.1.10.30.5.1.3 dsx3TimeElapsed 0 0 The number of seconds that have elapsed since
    the beginning of the near end current error-
    measurement period.
    1.3.6.1.2.1.10.30.5.1.4 dsx3ValidIntervals 0 0 The number of previous near end intervals for
    which valid data was collected. The value will be
    96 unless the interface was brou…
    1.3.6.1.2.1.10.30.5.1.5 dsx3LineType 0 0 This variable indicates the variety of DS3 C-bit
    or E3 application
    implementing this interface. The type of
    interface affects the…
    1.3.6.1.2.1.10.30.5.1.6 dsx3LineCoding 0 0 This variable describes the variety of Zero Code
    Suppression used on this interface, which in turn
    affects a number of its charac…
    1.3.6.1.2.1.10.30.5.1.8 dsx3CircuitIdentifier 0 0 This variable contains the transmission vendor's
    circuit identifier, for the purpose of
    facilitating troubleshooting.
    1.3.6.1.2.1.10.30.5.1.9 dsx3LoopbackConfig 0 0 This variable represents the loopback configuration
    of the DS3/E3 interface.
    The values mean:

    dsx3NoLoop
    Not in the loopback state.…
    1.3.6.1.2.1.10.30.5.1.10 dsx3LineStatus 0 0 This variable indicates the
    Line Status of the interface.
    It contains loopback state information
    and failure state information.
    The…
    1.3.6.1.2.1.10.30.5.1.11 dsx3TransmitClockSource 0 0 The source of Transmit Clock.
    is derived from the recovered receive clock of
    another DS3 interface.
    1.3.6.1.2.1.10.30.5.1.12 dsx3InvalidIntervals 0 0 The number of intervals for which no valid data
    is available.
    1.3.6.1.2.1.10.30.5.1.13 dsx3LineLength 0 0 The length of the ds3 line in meters. This
    object provides information for line build out
    circuitry if it exists and can use thi…
    1.3.6.1.2.1.10.30.5.1.14 dsx3LineStatusLastChange 0 0 The value of MIB II's sysUpTime object at the
    time this DS3/E3 entered its current line status
    state. If the current state was e…
    1.3.6.1.2.1.10.30.5.1.15 dsx3LineStatusChangeTrapEnable 0 0 Indicates whether dsx3LineStatusChange traps
    should be generated for this interface.
    1.3.6.1.2.1.10.30.5.1.16 dsx3LoopbackStatus 0 0 This variable represents the current state of the
    loopback on the DS3 interface. It contains
    information about loopbacks establi…
    1.3.6.1.2.1.10.30.5.1.17 dsx3Channelization 0 0 Indicates whether this ds3/e3 is channelized or
    unchannelized. The value of enabledDs1 indicates
    that this is a DS3 channelized …
    1.3.6.1.2.1.10.30.5.1.18 dsx3Ds1ForRemoteLoop 0 0 Indicates which ds1/e1 on this ds3/e3 will be
    indicated in the remote ds1 loopback request. A
    value of 0 means no DS1 will be lo…