The type of boot to be performed.
To initiate a dump, this parameter needs to
be set by the management station. The values
stored in anxcBootImage, anxcBootTime, and
anxcBootMsg are used as needed, depending on
the boot type. If the unit has no flash
memory, any attempt to set this object to
the value 'saveinflash' is rejected.
Parsed from file xylo-anx.mib.txt
Company: None
Module: XYLO-ANNEX-MIB
The type of boot to be performed.
To initiate a dump, this parameter needs to
be set by the management station. The values
stored in anxcBootImage, anxcBootTime, and
anxcBootMsg are used as needed, depending on
the boot type.
Parsed from file ANNEX-MIB.mib
Module: ANNEX-MIB
Vendor: Xylogics, Inc.
Module: ANNEX-MIB
[Automatically extracted from oidview.com]
anxcBoot OBJECT-TYPE SYNTAX INTEGER { immediate(1), delayed(2), dumpboot(3), diagnosticboot(4), abortschedule(5), quiet(6), saveinflash(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored in anxcBootImage, anxcBootTime, and anxcBootMsg are used as needed, depending on the boot type. If the unit has no flash memory, any attempt to set this object to the value 'saveinflash' is rejected." ::= { annexcmds 1 }
anxcBoot OBJECT-TYPE SYNTAX INTEGER { immediate(1), delayed(2), dumpboot(3), diagnosticboot(4), abortschedule(5), quiet(6) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored in anxcBootImage, anxcBootTime, and anxcBootMsg are used as needed, depending on the boot type." ::= { annexcmds 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.6.1.0 | anxcBoot | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.6.2 | anxcBootImage | 1 | 1 | The name of the image file to be used with the boot command. |
1.3.6.1.4.1.15.2.6.3 | anxcBootTime | 1 | 1 | The time at which the next boot is scheduled in HH:MM format. |
1.3.6.1.4.1.15.2.6.4 | anxcBootMsg | 1 | 1 | The broadcast message to be displayed when the next boot is performed. |
1.3.6.1.4.1.15.2.6.5 | anxcReset | 1 | 1 | Writing a value to this object causes the annex to reset the appropriate subsystem. |
1.3.6.1.4.1.15.2.6.6 | anxcBcast | 1 | 1 | Writing a value to this object causes the annex to send the message in anxcBcastMsg to the specified port set. |
1.3.6.1.4.1.15.2.6.7 | anxcBcastMsg | 1 | 1 | The message to be broadcast to the Annex ports. |
1.3.6.1.4.1.15.2.6.8 | anxcResetSession | 1 | 1 | This command resets PRI session parameters blocks. The RA6300 will re-read the Session Parameter blocks from config.annex. Existi… |
1.3.6.1.4.1.15.2.6.9 | anxcResetDialout | 1 | 1 | Reset specific dialout routes using a range string. example: 1,3-5,8 will reset dialout routes 1,3,4,5,8. While 1,3-5,g,8 (g is b… |
1.3.6.1.4.1.15.2.6.10 | anxcResetWan1Chan | 1 | 1 | Resetting a particular channel on WAN 1. |
1.3.6.1.4.1.15.2.6.11 | anxcResetWan2Chan | 1 | 1 | Resetting a particular channel on WAN 2. |