Resetting a particular channel on WAN 1.
Parsed from file xylo-anx.mib.txt
Company: avaya
Module: XYLO-ANNEX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
anxcResetWan1Chan OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Resetting a particular channel on WAN 1." ::= { annexcmds 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.6.10.0 | anxcResetWan1Chan | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.6.1 | anxcBoot | 1 | 1 | The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored… |
1.3.6.1.4.1.15.2.6.2 | anxcBootImage | 1 | 1 | The name of the image file to be used with the boot command. |
1.3.6.1.4.1.15.2.6.3 | anxcBootTime | 1 | 1 | The time at which the next boot is scheduled in HH:MM format. |
1.3.6.1.4.1.15.2.6.4 | anxcBootMsg | 1 | 1 | The broadcast message to be displayed when the next boot is performed. |
1.3.6.1.4.1.15.2.6.5 | anxcReset | 1 | 1 | Writing a value to this object causes the annex to reset the appropriate subsystem. |
1.3.6.1.4.1.15.2.6.6 | anxcBcast | 1 | 1 | Writing a value to this object causes the annex to send the message in anxcBcastMsg to the specified port set. |
1.3.6.1.4.1.15.2.6.7 | anxcBcastMsg | 1 | 1 | The message to be broadcast to the Annex ports. |
1.3.6.1.4.1.15.2.6.8 | anxcResetSession | 1 | 1 | This command resets PRI session parameters blocks. The RA6300 will re-read the Session Parameter blocks from config.annex. Existi… |
1.3.6.1.4.1.15.2.6.9 | anxcResetDialout | 1 | 1 | Reset specific dialout routes using a range string. example: 1,3-5,8 will reset dialout routes 1,3,4,5,8. While 1,3-5,g,8 (g is b… |
1.3.6.1.4.1.15.2.6.11 | anxcResetWan2Chan | 1 | 1 | Resetting a particular channel on WAN 2. |