This command resets PRI session parameters
blocks. The RA6300 will re-read the Session
Parameter blocks from config.annex. Existing
calls will not be reset. No calls will be
answered while the PRImate is performing
the reset. The time to reset will depend
on the number of sessions which have to be
loaded from the host; it will typically
be less than one second.
Parsed from file xylo-anx.mib.txt
Company: avaya
Module: XYLO-ANNEX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
anxcResetSession OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This command resets PRI session parameters blocks. The RA6300 will re-read the Session Parameter blocks from config.annex. Existing calls will not be reset. No calls will be answered while the PRImate is performing the reset. The time to reset will depend on the number of sessions which have to be loaded from the host; it will typically be less than one second." ::= { annexcmds 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.6.8.0 | anxcResetSession | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.6.1 | anxcBoot | 1 | 1 | The type of boot to be performed. To initiate a dump, this parameter needs to be set by the management station. The values stored… |
| 1.3.6.1.4.1.15.2.6.2 | anxcBootImage | 1 | 1 | The name of the image file to be used with the boot command. |
| 1.3.6.1.4.1.15.2.6.3 | anxcBootTime | 1 | 1 | The time at which the next boot is scheduled in HH:MM format. |
| 1.3.6.1.4.1.15.2.6.4 | anxcBootMsg | 1 | 1 | The broadcast message to be displayed when the next boot is performed. |
| 1.3.6.1.4.1.15.2.6.5 | anxcReset | 1 | 1 | Writing a value to this object causes the annex to reset the appropriate subsystem. |
| 1.3.6.1.4.1.15.2.6.6 | anxcBcast | 1 | 1 | Writing a value to this object causes the annex to send the message in anxcBcastMsg to the specified port set. |
| 1.3.6.1.4.1.15.2.6.7 | anxcBcastMsg | 1 | 1 | The message to be broadcast to the Annex ports. |
| 1.3.6.1.4.1.15.2.6.9 | anxcResetDialout | 1 | 1 | Reset specific dialout routes using a range string. example: 1,3-5,8 will reset dialout routes 1,3,4,5,8. While 1,3-5,g,8 (g is b… |
| 1.3.6.1.4.1.15.2.6.10 | anxcResetWan1Chan | 1 | 1 | Resetting a particular channel on WAN 1. |
| 1.3.6.1.4.1.15.2.6.11 | anxcResetWan2Chan | 1 | 1 | Resetting a particular channel on WAN 2. |