Aces in a Acl are ordered based on precedence assigned
by user.An acl can contain multiple ace's that match a
packet. Precedence, when platform supports, makes Acl
an ordered list with high precedence ace being applied
first. Lower is the value, higher is the precedence.
When the user sets precedence to 0, system automatically
picks up the next available precedence. Least possible
precedence is reserved for default Ace.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcFilterAceComnPrecedence OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Aces in a Acl are ordered based on precedence assigned by user.An acl can contain multiple ace's that match a packet. Precedence, when platform supports, makes Acl an ordered list with high precedence ace being applied first. Lower is the value, higher is the precedence. When the user sets precedence to 0, system automatically picks up the next available precedence. Least possible precedence is reserved for default Ace." DEFVAL { 0 } ::= { rcFilterAceComnEntry 2 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.55.9.1.1.1 | rcFilterAceComnId | 0 | 0 | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.3 | rcFilterAceComnName | 0 | 0 | A descriptive name choosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.4 | rcFilterAceComnTraffic | 0 | 0 | An ace's capability to match packets being 'routed' and 'bridged'. The support and accurate behavior for these options depends on… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.5 | rcFilterAceComnMode | 0 | 0 | Operating Mode associated with the Ace is effective on the packets matching this Ace. 'Permit', 'deny', 'Redirect' are the operat… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.6 | rcFilterAceComnAction | 0 | 0 | Additional actions performed by the Ace. Some options are not be compatbile with some modes of operation of the Ace. Any of the b… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.7 | rcFilterAceComnRemarkDscp | 0 | 0 | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.8 | rcFilterAceComnRemarkDot1Priority | 0 | 0 | User Priority as described by Layer 2 standards: 802.1Q, 802.1p. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.9 | rcFilterAceComnRedirectNextHop | 0 | 0 | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.10 | rcFilterAceComnRedirectUnreach | 0 | 0 | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.11 | rcFilterAceComnPolice | 0 | 0 | Policing profile Identifier. Set the desired policing profile identifier. Set the value 'disable' When policing is not desired. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.12 | rcFilterAceComnMatchCountPkts | 0 | 0 | Packet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.13 | rcFilterAceComnMatchCountOctets | 0 | 0 | Octet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.14 | rcFilterAceComnMatchCountMode | 0 | 0 | Packet and octet count of matching traffic from all ports where the entry is active. Set the mode to 'disable' when counters are … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.15 | rcFilterAceComnRowStatus | 0 | 0 | Create/delete operations for this entry. |