User Priority as described by Layer 2 standards:
802.1Q, 802.1p.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcFilterAceComnRemarkDot1Priority OBJECT-TYPE SYNTAX INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "User Priority as described by Layer 2 standards: 802.1Q, 802.1p. " DEFVAL { disable } ::= { rcFilterAceComnEntry 8 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.55.9.1.1.1 | rcFilterAceComnId | 0 | 0 | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.2 | rcFilterAceComnPrecedence | 0 | 0 | Aces in a Acl are ordered based on precedence assigned by user.An acl can contain multiple ace's that match a packet. Precedence,… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.3 | rcFilterAceComnName | 0 | 0 | A descriptive name choosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.4 | rcFilterAceComnTraffic | 0 | 0 | An ace's capability to match packets being 'routed' and 'bridged'. The support and accurate behavior for these options depends on… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.5 | rcFilterAceComnMode | 0 | 0 | Operating Mode associated with the Ace is effective on the packets matching this Ace. 'Permit', 'deny', 'Redirect' are the operat… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.6 | rcFilterAceComnAction | 0 | 0 | Additional actions performed by the Ace. Some options are not be compatbile with some modes of operation of the Ace. Any of the b… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.7 | rcFilterAceComnRemarkDscp | 0 | 0 | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.9 | rcFilterAceComnRedirectNextHop | 0 | 0 | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.10 | rcFilterAceComnRedirectUnreach | 0 | 0 | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.11 | rcFilterAceComnPolice | 0 | 0 | Policing profile Identifier. Set the desired policing profile identifier. Set the value 'disable' When policing is not desired. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.12 | rcFilterAceComnMatchCountPkts | 0 | 0 | Packet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.13 | rcFilterAceComnMatchCountOctets | 0 | 0 | Octet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.14 | rcFilterAceComnMatchCountMode | 0 | 0 | Packet and octet count of matching traffic from all ports where the entry is active. Set the mode to 'disable' when counters are … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.15 | rcFilterAceComnRowStatus | 0 | 0 | Create/delete operations for this entry. |