The 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(like AF1 which includes AF11,
AF12,AF13) to mark specific diffserv class traffic.
Set the field value to desired integer dscp code for
rcFilterAceComnRemarkDscp field to mark non-standard
traffic classes and local use PHBs.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcFilterAceComnRemarkDscp OBJECT-TYPE SYNTAX INTEGER { phbCS0(0), phbCS1(8), phbAF11(10), phbAF12(12), phbAF13(14), phbCS2(16), phbAF21(18), phbAF22(20), phbAF23(22), phbCS3(24), phbAF31(26), phbAF32(28), phbAF33(30), phbCS4(32), phbAF41(34), phbAF42(36), phbAF43(38), phbCS5(40), phbEF(46), phbCS6(48), phbCS7(56), disable(256) } MAX-ACCESS read-write STATUS current DESCRIPTION "The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to mark specific diffserv class traffic. Set the field value to desired integer dscp code for rcFilterAceComnRemarkDscp field to mark non-standard traffic classes and local use PHBs." DEFVAL { disable } ::= { rcFilterAceComnEntry 7 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.55.9.1.1.1 | rcFilterAceComnId | 0 | 0 | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.2 | rcFilterAceComnPrecedence | 0 | 0 | Aces in a Acl are ordered based on precedence assigned by user.An acl can contain multiple ace's that match a packet. Precedence,… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.3 | rcFilterAceComnName | 0 | 0 | A descriptive name choosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.4 | rcFilterAceComnTraffic | 0 | 0 | An ace's capability to match packets being 'routed' and 'bridged'. The support and accurate behavior for these options depends on… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.5 | rcFilterAceComnMode | 0 | 0 | Operating Mode associated with the Ace is effective on the packets matching this Ace. 'Permit', 'deny', 'Redirect' are the operat… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.6 | rcFilterAceComnAction | 0 | 0 | Additional actions performed by the Ace. Some options are not be compatbile with some modes of operation of the Ace. Any of the b… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.8 | rcFilterAceComnRemarkDot1Priority | 0 | 0 | User Priority as described by Layer 2 standards: 802.1Q, 802.1p. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.9 | rcFilterAceComnRedirectNextHop | 0 | 0 | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.10 | rcFilterAceComnRedirectUnreach | 0 | 0 | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.11 | rcFilterAceComnPolice | 0 | 0 | Policing profile Identifier. Set the desired policing profile identifier. Set the value 'disable' When policing is not desired. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.12 | rcFilterAceComnMatchCountPkts | 0 | 0 | Packet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.13 | rcFilterAceComnMatchCountOctets | 0 | 0 | Octet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.14 | rcFilterAceComnMatchCountMode | 0 | 0 | Packet and octet count of matching traffic from all ports where the entry is active. Set the mode to 'disable' when counters are … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.15 | rcFilterAceComnRowStatus | 0 | 0 | Create/delete operations for this entry. |