Operating Mode associated with the Ace is effective on
the packets matching this Ace. 'Permit', 'deny',
'Redirect' are the operating modes supported by the ace.
The ace is not effective on traffic when set to
'inactive' mode.
Parsed from file rapid_city-accelar.mib.txt
Company: rapidcity
Module: RAPID-CITY
rcFilterAceComnMode OBJECT-TYPE SYNTAX INTEGER { inactive(0), permit(1), deny(2), redirect(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Operating Mode associated with the Ace is effective on the packets matching this Ace. 'Permit', 'deny', 'Redirect' are the operating modes supported by the ace. The ace is not effective on traffic when set to 'inactive' mode." DEFVAL { deny } ::= { rcFilterAceComnEntry 5 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.55.9.1.1.1 | rcFilterAceComnId | 0 | 0 | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.2 | rcFilterAceComnPrecedence | 0 | 0 | Aces in a Acl are ordered based on precedence assigned by user.An acl can contain multiple ace's that match a packet. Precedence,… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.3 | rcFilterAceComnName | 0 | 0 | A descriptive name choosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.4 | rcFilterAceComnTraffic | 0 | 0 | An ace's capability to match packets being 'routed' and 'bridged'. The support and accurate behavior for these options depends on… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.6 | rcFilterAceComnAction | 0 | 0 | Additional actions performed by the Ace. Some options are not be compatbile with some modes of operation of the Ace. Any of the b… |
| 1.3.6.1.4.1.2272.1.55.9.1.1.7 | rcFilterAceComnRemarkDscp | 0 | 0 | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.8 | rcFilterAceComnRemarkDot1Priority | 0 | 0 | User Priority as described by Layer 2 standards: 802.1Q, 802.1p. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.9 | rcFilterAceComnRedirectNextHop | 0 | 0 | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.10 | rcFilterAceComnRedirectUnreach | 0 | 0 | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.11 | rcFilterAceComnPolice | 0 | 0 | Policing profile Identifier. Set the desired policing profile identifier. Set the value 'disable' When policing is not desired. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.12 | rcFilterAceComnMatchCountPkts | 0 | 0 | Packet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.13 | rcFilterAceComnMatchCountOctets | 0 | 0 | Octet count of matching traffic on all ports where the rule is active. |
| 1.3.6.1.4.1.2272.1.55.9.1.1.14 | rcFilterAceComnMatchCountMode | 0 | 0 | Packet and octet count of matching traffic from all ports where the entry is active. Set the mode to 'disable' when counters are … |
| 1.3.6.1.4.1.2272.1.55.9.1.1.15 | rcFilterAceComnRowStatus | 0 | 0 | Create/delete operations for this entry. |