Identifies each entry in the 2-port 10/100 Switch Unit Table.
There is one entry for each potential unit in a maximum sized stack.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwUnitEntry OBJECT-TYPE SYNTAX N2feTen100SwUnitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Identifies each entry in the 2-port 10/100 Switch Unit Table. There is one entry for each potential unit in a maximum sized stack." INDEX { n2feTen100SwUnitId } ::= { n2feTen100SwUnitTable 1 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: ENTRY
Access: not-accessible
Syntax: N2feTen100SwUnitEntry
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.11.2.1.1.1 | n2feTen100SwUnitId | 0 | 0 | The index into the 2-port 10/100 Switch Unit Table. |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.2 | n2feTen100SwHardwareDisableSwitchStatus | 0 | 0 | The status of the Internal 10/100 Switch Disable DIP switch. This switch is present on the rear panel of 2724 models only. When … |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.3 | n2feTen100SwEnable | 0 | 0 | DURABLE: Used to enable or disable the internal 2-port 10/100 switch for the unit referenced by n2feTen100SwUnitId. If disable… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.4 | n2feTen100SwAddrTableOverflows | 0 | 0 | More addresses were discovered on the 10Mbps segment than would fit in the internal 10/100 switch's Address Table at least this m… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.5 | n2feTen100SwTenPktBufferOverflows | 0 | 0 | 10Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 100Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.6 | n2feTen100Sw100PktBufferOverflows | 0 | 0 | 100Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 10Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.7 | n2feTen100SwReset | 0 | 0 | Used to reset the 2-port 10/100 switch and Address Table for the unit referenced by n2feTen100SwUnitId. The Static Addresses fo… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.8 | n2feTen100SwPktBufRatio | 0 | 0 | DURABLE: Defines the packet buffer split between the 100 and 10 Mbps segments for the 2-port 10/100 switch in the unit referenc… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.9 | n2feTen100SwTenBcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.10 | n2feTen100SwTenMcastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.11 | n2feTen100Sw100BcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.12 | n2feTen100Sw100McastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |