Used to reset the 2-port 10/100 switch and Address Table for the
unit referenced by n2feTen100SwUnitId. The Static Addresses for this
unit are reloaded at the conclusion of the reset. Requests for
100Mbps-only or non-existent units are rejected with a BAD VALUE
error. For valid units, this object always returns not-resetting(1)
when read.
Warning: Switched packets are dropped while the 10/100 switch
is resetting.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwReset OBJECT-TYPE SYNTAX INTEGER { not-resetting(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to reset the 2-port 10/100 switch and Address Table for the unit referenced by n2feTen100SwUnitId. The Static Addresses for this unit are reloaded at the conclusion of the reset. Requests for 100Mbps-only or non-existent units are rejected with a BAD VALUE error. For valid units, this object always returns not-resetting(1) when read. Warning: Switched packets are dropped while the 10/100 switch is resetting." ::= { n2feTen100SwUnitEntry 7 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.11.2.1.1.1 | n2feTen100SwUnitId | 0 | 0 | The index into the 2-port 10/100 Switch Unit Table. |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.2 | n2feTen100SwHardwareDisableSwitchStatus | 0 | 0 | The status of the Internal 10/100 Switch Disable DIP switch. This switch is present on the rear panel of 2724 models only. When … |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.3 | n2feTen100SwEnable | 0 | 0 | DURABLE: Used to enable or disable the internal 2-port 10/100 switch for the unit referenced by n2feTen100SwUnitId. If disable… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.4 | n2feTen100SwAddrTableOverflows | 0 | 0 | More addresses were discovered on the 10Mbps segment than would fit in the internal 10/100 switch's Address Table at least this m… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.5 | n2feTen100SwTenPktBufferOverflows | 0 | 0 | 10Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 100Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.6 | n2feTen100Sw100PktBufferOverflows | 0 | 0 | 100Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 10Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.8 | n2feTen100SwPktBufRatio | 0 | 0 | DURABLE: Defines the packet buffer split between the 100 and 10 Mbps segments for the 2-port 10/100 switch in the unit referenc… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.9 | n2feTen100SwTenBcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.10 | n2feTen100SwTenMcastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.11 | n2feTen100Sw100BcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.12 | n2feTen100Sw100McastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |