DURABLE: Defines the packet buffer split between the 100 and 10 Mbps
segments for the 2-port 10/100 switch in the unit referenced by
n2feTen100SwUnitId. To minimize dropped packets from the 100 Mbps
segment, use the largest ratio. It is recommended that the user leave
this object at the factory setting of fifteen-100-to-one-ten(15).
Warning: Switched packets are dropped while the packet buffer
ratio is changed.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwPktBufRatio OBJECT-TYPE SYNTAX INTEGER { fifteen-100-to-one-ten(15), seven-100-to-one-ten(7) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Defines the packet buffer split between the 100 and 10 Mbps segments for the 2-port 10/100 switch in the unit referenced by n2feTen100SwUnitId. To minimize dropped packets from the 100 Mbps segment, use the largest ratio. It is recommended that the user leave this object at the factory setting of fifteen-100-to-one-ten(15). Warning: Switched packets are dropped while the packet buffer ratio is changed." ::= { n2feTen100SwUnitEntry 8 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.11.2.1.1.1 | n2feTen100SwUnitId | 0 | 0 | The index into the 2-port 10/100 Switch Unit Table. |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.2 | n2feTen100SwHardwareDisableSwitchStatus | 0 | 0 | The status of the Internal 10/100 Switch Disable DIP switch. This switch is present on the rear panel of 2724 models only. When … |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.3 | n2feTen100SwEnable | 0 | 0 | DURABLE: Used to enable or disable the internal 2-port 10/100 switch for the unit referenced by n2feTen100SwUnitId. If disable… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.4 | n2feTen100SwAddrTableOverflows | 0 | 0 | More addresses were discovered on the 10Mbps segment than would fit in the internal 10/100 switch's Address Table at least this m… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.5 | n2feTen100SwTenPktBufferOverflows | 0 | 0 | 10Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 100Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.6 | n2feTen100Sw100PktBufferOverflows | 0 | 0 | 100Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 10Mbps segment was full at lea… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.7 | n2feTen100SwReset | 0 | 0 | Used to reset the 2-port 10/100 switch and Address Table for the unit referenced by n2feTen100SwUnitId. The Static Addresses fo… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.9 | n2feTen100SwTenBcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.10 | n2feTen100SwTenMcastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.11 | n2feTen100Sw100BcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
1.3.6.1.4.1.232.101.1.3.11.2.1.1.12 | n2feTen100Sw100McastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |