DURABLE: Used to enable or disable the internal 2-port 10/100
switch for the unit referenced by n2feTen100SwUnitId. If disabled(2),
the 10 Mbps segment is isolated. The factory setting is enabled(1).
When this object is set to enabled(1), the internal 2-port 10/100
switch is enabled and packets are allowed to be forwarded between
the 10Mbps segment and the 100Mbps segment.
When this object is set to disabled(2), the internal 2-port 10/100
switch is disabled and packets are never forwarded between the
10Mbps segment and the 100Mbps segment. The 10Mbps segment is
isolated from both the unit's 100Mbps segment and the stack's
common 100Mbps backplane. The 10Mbps segment is also isolated
from the repeater management agent.
NOTE: A n2feTen100SwHardwareDisableSwitchStatus of disabled(2)
supersedes this object.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feTen100SwEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: Used to enable or disable the internal 2-port 10/100 switch for the unit referenced by n2feTen100SwUnitId. If disabled(2), the 10 Mbps segment is isolated. The factory setting is enabled(1). When this object is set to enabled(1), the internal 2-port 10/100 switch is enabled and packets are allowed to be forwarded between the 10Mbps segment and the 100Mbps segment. When this object is set to disabled(2), the internal 2-port 10/100 switch is disabled and packets are never forwarded between the 10Mbps segment and the 100Mbps segment. The 10Mbps segment is isolated from both the unit's 100Mbps segment and the stack's common 100Mbps backplane. The 10Mbps segment is also isolated from the repeater management agent. NOTE: A n2feTen100SwHardwareDisableSwitchStatus of disabled(2) supersedes this object." ::= { n2feTen100SwUnitEntry 3 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.1 | n2feTen100SwUnitId | 0 | 0 | The index into the 2-port 10/100 Switch Unit Table. |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.2 | n2feTen100SwHardwareDisableSwitchStatus | 0 | 0 | The status of the Internal 10/100 Switch Disable DIP switch. This switch is present on the rear panel of 2724 models only. When … |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.4 | n2feTen100SwAddrTableOverflows | 0 | 0 | More addresses were discovered on the 10Mbps segment than would fit in the internal 10/100 switch's Address Table at least this m… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.5 | n2feTen100SwTenPktBufferOverflows | 0 | 0 | 10Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 100Mbps segment was full at lea… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.6 | n2feTen100Sw100PktBufferOverflows | 0 | 0 | 100Mbps packets were dropped because the buffer containing packets waiting to be forwarded to the 10Mbps segment was full at lea… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.7 | n2feTen100SwReset | 0 | 0 | Used to reset the 2-port 10/100 switch and Address Table for the unit referenced by n2feTen100SwUnitId. The Static Addresses fo… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.8 | n2feTen100SwPktBufRatio | 0 | 0 | DURABLE: Defines the packet buffer split between the 100 and 10 Mbps segments for the 2-port 10/100 switch in the unit referenc… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.9 | n2feTen100SwTenBcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.10 | n2feTen100SwTenMcastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 10 Mbps to 100 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.11 | n2feTen100Sw100BcastFilter | 0 | 0 | DURABLE: Forwards/blocks broadcast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |
| 1.3.6.1.4.1.232.101.1.3.11.2.1.1.12 | n2feTen100Sw100McastFilter | 0 | 0 | DURABLE: Forwards/blocks multicast traffic from the 100 Mbps to 10 Mbps segments for the unit referenced by n2feTen100SwUnitId.… |