This object is used to enable or disable the recording of
usage information for unsuccessful ATM SVCs that originate
or terminate on this port. Note that this parameter governs
recording for both point-to-point and point-to-multipoint
SVCs.
disabled = Usage data will not be generated for
unsuccessful calls on this port.
originating = Usage data is generated for all unsuccessful
calls that originated on this port. This
value can only be set for UNI ports.
terminating = Usage data is generated for all unsuccessful
calls that terminated on this port.
enabled = Usage data is generated for all unsuccessful
calls that originated or terminated on this
port. This value can only be set for UNI ports.
The default value of this object is enabled(4) at the UNI
and disabled(1) at the network interface.
The acceptable values of this object on a network interface
are disabled(1) or terminating(3).
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmacctLportSvcUnsuccRecording OBJECT-TYPE SYNTAX INTEGER { disabled (1), originating (2), terminating (3), enabled (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the recording of usage information for unsuccessful ATM SVCs that originate or terminate on this port. Note that this parameter governs recording for both point-to-point and point-to-multipoint SVCs. disabled = Usage data will not be generated for unsuccessful calls on this port. originating = Usage data is generated for all unsuccessful calls that originated on this port. This value can only be set for UNI ports. terminating = Usage data is generated for all unsuccessful calls that terminated on this port. enabled = Usage data is generated for all unsuccessful calls that originated or terminated on this port. This value can only be set for UNI ports. The default value of this object is enabled(4) at the UNI and disabled(1) at the network interface. The acceptable values of this object on a network interface are disabled(1) or terminating(3)." ::= { atmacctLportEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.1.24.1.1 | atmacctLportIfIndex | 0 | 0 | Index: logical-port identifier. |
| 1.3.6.1.4.1.277.16.1.24.1.2 | atmacctLportSvcControl | 0 | 0 | This object defines the ability to enable and disable ATM SVC accounting on this logical port. When the value of atmacctControl … |
| 1.3.6.1.4.1.277.16.1.24.1.3 | atmacctLportSvcPtPtRecording | 0 | 0 | This object is used to enable or disable the recording of usage information for Point to Point ATM SVCs that originate or termina… |
| 1.3.6.1.4.1.277.16.1.24.1.4 | atmacctLportSvcPtMPtRecording | 0 | 0 | This object is used to enable or disable the recording of usage information for Point to Multi-Point ATM SVCs that originate or t… |
| 1.3.6.1.4.1.277.16.1.24.1.5 | atmacctLportSvcDefaultAddress | 0 | 0 | This object defines a Default Billing Address for ATM SVCs which originate at his lport. Note that this address may be different… |
| 1.3.6.1.4.1.277.16.1.24.1.6 | atmacctLportSvcIntraAbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM ABR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.7 | atmacctLportSvcIntraCbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM CBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.8 | atmacctLportSvcIntraUbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM UBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.9 | atmacctLportSvcIntraVbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM VBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.11 | atmacctLportSvcSubAddressRecording | 0 | 0 | This object is used to enable or disable the recording of the Sub-addresses in ATM SVC accounting records at the UNI. disabled … |
| 1.3.6.1.4.1.277.16.1.24.1.12 | atmacctLportPvcCarrierId | 0 | 0 | This object is a 5 digit decimal number that is used to identify the interconnected carrier associated with ATM PVCs at a network… |
| 1.3.6.1.4.1.277.16.1.24.1.13 | atmacctLportPvcParamRecording | 0 | 0 | This object controls the recording of ATM PVC parameters when usage measurement is enabled for this port. When set to enabled(2)… |
| 1.3.6.1.4.1.277.16.1.24.1.14 | atmacctLportSvcDefaultAddressType | 0 | 0 | This object identifies the type of ATM address that is to be used as the default billing address for SVCs originating on this log… |