This object is used to enable or disable the recording of
usage information for Point to Multi-Point ATM SVCs that
originate or terminate on this port.
disabled = Usage measurement will not be performed for
SVC calls on this port.
originating = Usage data is generated only for calls that
originate on this port.
terminating = Usage data is generated only for calls that
terminate on this port.
enabled = Usage measurement will be performed at both
originating and terminating ends of all calls
on this port.
The default value of this object is terminating(3)
When set to a value other than disabled(1), unsuccessful
ATM SVC calls will be recorded according to the value of the
atmacctLportUnsuccSvcRecording object. Otherwise
unsuccessful calls will not be recorded.
Parsed from file cascade.mib.txt
Company: cascade
Module: CASCADE-MIB
Vendor: Cascade Communications
Module: CASCADE-MIB (cascade.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
atmacctLportSvcPtMPtRecording OBJECT-TYPE SYNTAX INTEGER { disabled (1), originating (2), terminating (3), enabled (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable the recording of usage information for Point to Multi-Point ATM SVCs that originate or terminate on this port. disabled = Usage measurement will not be performed for SVC calls on this port. originating = Usage data is generated only for calls that originate on this port. terminating = Usage data is generated only for calls that terminate on this port. enabled = Usage measurement will be performed at both originating and terminating ends of all calls on this port. The default value of this object is terminating(3) When set to a value other than disabled(1), unsuccessful ATM SVC calls will be recorded according to the value of the atmacctLportUnsuccSvcRecording object. Otherwise unsuccessful calls will not be recorded." ::= { atmacctLportEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.277.16.1.24.1.1 | atmacctLportIfIndex | 0 | 0 | Index: logical-port identifier. |
| 1.3.6.1.4.1.277.16.1.24.1.2 | atmacctLportSvcControl | 0 | 0 | This object defines the ability to enable and disable ATM SVC accounting on this logical port. When the value of atmacctControl … |
| 1.3.6.1.4.1.277.16.1.24.1.3 | atmacctLportSvcPtPtRecording | 0 | 0 | This object is used to enable or disable the recording of usage information for Point to Point ATM SVCs that originate or termina… |
| 1.3.6.1.4.1.277.16.1.24.1.5 | atmacctLportSvcDefaultAddress | 0 | 0 | This object defines a Default Billing Address for ATM SVCs which originate at his lport. Note that this address may be different… |
| 1.3.6.1.4.1.277.16.1.24.1.6 | atmacctLportSvcIntraAbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM ABR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.7 | atmacctLportSvcIntraCbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM CBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.8 | atmacctLportSvcIntraUbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM UBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.9 | atmacctLportSvcIntraVbrRecording | 0 | 0 | This object is used to enable or disable the recording of Intranetwork ATM VBR SVCs at the UNI. The switch will generate usage d… |
| 1.3.6.1.4.1.277.16.1.24.1.10 | atmacctLportSvcUnsuccRecording | 0 | 0 | This object is used to enable or disable the recording of usage information for unsuccessful ATM SVCs that originate or terminate… |
| 1.3.6.1.4.1.277.16.1.24.1.11 | atmacctLportSvcSubAddressRecording | 0 | 0 | This object is used to enable or disable the recording of the Sub-addresses in ATM SVC accounting records at the UNI. disabled … |
| 1.3.6.1.4.1.277.16.1.24.1.12 | atmacctLportPvcCarrierId | 0 | 0 | This object is a 5 digit decimal number that is used to identify the interconnected carrier associated with ATM PVCs at a network… |
| 1.3.6.1.4.1.277.16.1.24.1.13 | atmacctLportPvcParamRecording | 0 | 0 | This object controls the recording of ATM PVC parameters when usage measurement is enabled for this port. When set to enabled(2)… |
| 1.3.6.1.4.1.277.16.1.24.1.14 | atmacctLportSvcDefaultAddressType | 0 | 0 | This object identifies the type of ATM address that is to be used as the default billing address for SVCs originating on this log… |