This object is sent to managers as part of all Trap PDUs, to
determine the module alarm severity. An implementation may
not support all the possible values.
The Possible values are :
major (1) : Major Service has been impacted
minor (2) : Minor Service has been lost
dontCare (3) : severity is not applicable
critical (4) : affects existing data traffic
error (5) : error has occurred
warning (6) : a threshold has been reached
notice (7) : a normal but significant event has occurred
info (8) : informational
Parsed from file BASIS-GENERIC-MIB.mib
Module: BASIS-GENERIC-MIB
This object is sent to managers as part of all Trap PDUs, to
determine the module alarm severity. An implementation may
not support all the possible values.
The Possible values are :
major (1) : Major Service has been impacted
minor (2) : Minor Service has been lost
dontCare (3) : severity is not applicable
critical (4) : affects existing data traffic
error (5) : error has occurred
warning (6) : a threshold has been reached
notice (7) : a normal but significant event has occurred
info (8) : informational
This object is sent to managers as part of all Trap PDUs, to
determine the module alarm severity. An implementation may
not support all the possible values.
The Possible values are :
major (1) : Major Service has been impacted
minor (2) : Minor Service has been lost
dontCare (3) : severity is not applicable
critical (4) : affects existing data traffic
error (5) : error has occurred
warning (6) : a threshold has been reached
notice (7) : a normal but significant event has occurred
info (8) : informational
Parsed from file BASIS-GENERIC-MIB.my.txt
Company: None
Module: BASIS-GENERIC-MIB
This object is sent to managers as part of all Trap PDUs, to
determine the module alarm severity. An implementation may
not support all the possible values.
The Possible values are :
major (1) : Major Service has been impacted
minor (2) : Minor Service has been lost
dontCare (3) : severity is not applicable
critical (4) : affects existing data traffic
error (5) : error has occurred
warning (6) : a threshold has been reached
notice (7) : a normal but significant event has occurred
info (8) : informational
moduleTrapAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor (1), major (2), dontCare (3), critical (4), error (5), warning (6), notice (7), info (8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. The Possible values are : major (1) : Major Service has been impacted minor (2) : Minor Service has been lost dontCare (3) : severity is not applicable critical (4) : affects existing data traffic error (5) : error has occurred warning (6) : a threshold has been reached notice (7) : a normal but significant event has occurred info (8) : informational " ::= { cardInformation 15 }
moduleTrapAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor(1), major(2), dontCare(3), critical(4), error(5), warning(6), notice(7), info(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. The Possible values are : major (1) : Major Service has been impacted minor (2) : Minor Service has been lost dontCare (3) : severity is not applicable critical (4) : affects existing data traffic error (5) : error has occurred warning (6) : a threshold has been reached notice (7) : a normal but significant event has occurred info (8) : informational" ::= { cardInformation 15 }
Vendor: Stratacom
Module: BASIS-GENERIC-MIB
[Automatically extracted from oidview.com]
moduleTrapAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor (1), major (2), dontCare (3), critical (4), error (5), warning (6), notice (7), info (8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. The Possible values are : major (1) : Major Service has been impacted minor (2) : Minor Service has been lost dontCare (3) : severity is not applicable critical (4) : affects existing data traffic error (5) : error has occurred warning (6) : a threshold has been reached notice (7) : a normal but significant event has occurred info (8) : informational " ::= { cardInformation 15 }
moduleTrapAlarmSeverity OBJECT-TYPE SYNTAX INTEGER { minor (1), major (2), dontCare (3), critical (4), error (5), warning (6), notice (7), info (8) } ACCESS read-only STATUS mandatory DESCRIPTION "This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not support all the possible values. The Possible values are : major (1) : Major Service has been impacted minor (2) : Minor Service has been lost dontCare (3) : severity is not applicable critical (4) : affects existing data traffic error (5) : error has occurred warning (6) : a threshold has been reached notice (7) : a normal but significant event has occurred info (8) : informational " ::= { cardInformation 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.15.0 | moduleTrapAlarmSeverity | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.1 | moduleSlotNumber | 1 | 1 | Slot number this card is present |
| 1.3.6.1.4.1.351.110.2.1.2 | functionModuleType | 1 | 1 | This object holds the type of the card. The card can type is for Processor module as well as service module. |
| 1.3.6.1.4.1.351.110.2.1.3 | functionModuleDescription | 1 | 1 | Describes the card |
| 1.3.6.1.4.1.351.110.2.1.4 | functionModuleSerialNum | 1 | 1 | Serial number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.5 | functionModuleHWRev | 1 | 1 | Hardware revision number for function Module. |
| 1.3.6.1.4.1.351.110.2.1.6 | functionModuleFWRev | 1 | 1 | Firmware revision number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.7 | functionModuleState | 1 | 1 | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. st… |
| 1.3.6.1.4.1.351.110.2.1.8 | functionModuleResetReason | 1 | 1 | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) … |
| 1.3.6.1.4.1.351.110.2.1.9 | lineModuleType | 1 | 1 | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physica… |
| 1.3.6.1.4.1.351.110.2.1.10 | lineModuleDescription | 1 | 1 | This object contains description of the line module. |
| 1.3.6.1.4.1.351.110.2.1.11 | lineModuleSerialNum | 1 | 1 | This object contains Serial number of the line module. |
| 1.3.6.1.4.1.351.110.2.1.12 | lineModuleHWRev | 1 | 1 | This object contains Hardware revision for line module. |
| 1.3.6.1.4.1.351.110.2.1.13 | lineModuleFWRev | 1 | 1 | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet st… |
| 1.3.6.1.4.1.351.110.2.1.14 | lineModuleState | 1 | 1 | line module status. |
| 1.3.6.1.4.1.351.110.2.1.16 | mibVersionNumber | 1 | 1 | MIB version number. Updated when any part of the MIB changes. |
| 1.3.6.1.4.1.351.110.2.1.17 | configChangeTypeBitMap | 1 | 1 | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Conf… |
| 1.3.6.1.4.1.351.110.2.1.18 | configChangeObjectIndex | 1 | 1 | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port res… |
| 1.3.6.1.4.1.351.110.2.1.19 | configChangeStatus | 1 | 1 | This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as… |
| 1.3.6.1.4.1.351.110.2.1.20 | cardIntegratedAlarmBitMap | 1 | 1 | Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/hel… |
| 1.3.6.1.4.1.351.110.2.1.21 | cleiCode | 1 | 1 | Common Language Equipment(CLEI) Code. |
| 1.3.6.1.4.1.351.110.2.1.22 | macAddress | 1 | 1 | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
| 1.3.6.1.4.1.351.110.2.1.23 | macAddrBlkSize | 1 | 1 | The MAC address block size, entered by manufacturing. |
| 1.3.6.1.4.1.351.110.2.1.24 | finalTestTechnician | 1 | 1 | The Final Test Technician Employee Identification Number. |
| 1.3.6.1.4.1.351.110.2.1.25 | hwFailures | 1 | 1 | Hardware failure code. |
| 1.3.6.1.4.1.351.110.2.1.26 | hwHistory | 1 | 1 | RMA Test History - RMA Failure Code. |
| 1.3.6.1.4.1.351.110.2.1.27 | secLineModuleType | 1 | 1 | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally… |
| 1.3.6.1.4.1.351.110.2.1.28 | secLineModuleDescription | 1 | 1 | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.29 | secLineModuleSerialNum | 1 | 1 | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.30 | secLineModuleHWRev | 1 | 1 | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.31 | secLineModuleFWRev | 1 | 1 | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revi… |
| 1.3.6.1.4.1.351.110.2.1.32 | secLineModuleState | 1 | 1 | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.33 | configChangeParentObjectIndex | 1 | 1 | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (l… |
| 1.3.6.1.4.1.351.110.2.1.34 | configChangeGrandParentObjectIndex | 1 | 1 | Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) o… |
| 1.3.6.1.4.1.351.110.2.1.35 | configChangeSMSpecificObject | 1 | 1 | configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in diffe… |
| 1.3.6.1.4.1.351.110.2.1.36 | transId | 1 | 1 | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented b… |