Grand Parent object index, could be
- line index
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This object is applicable only when configChangeParentObjectIndex
represents a port index.
Following specifies the mapping between the
configChangeParentObjectIndex and its corresponding
configChangeGrandParentObjectIndex.
When the 'Port Configuration Change' bit is set
the configChangeGrandParentObjectIndex will represent
a 'Line Index' which in turn has the following
special meaning in FRSM-2CT3 cards.
- configChangeParentObjectIndex range between 1..56
indicates that the configuration change refers to the DS1 line
index. A value of (128 + n) refers to DS3 line index
numbered 'n'.
This object is applicable only in traps.
A GET on this may not return a useful result.
This object is not applicable to MGX 8850
release 1.x.x and MGX8220.
Parsed from file BASIS-GENERIC-MIB.mib
Module: BASIS-GENERIC-MIB
Grand Parent object index, could be
- line index
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This object is applicable only when configChangeParentObjectIndex
represents a port index.
Following specifies the mapping between the
configChangeParentObjectIndex and its corresponding
configChangeGrandParentObjectIndex.
When the 'Port Configuration Change' bit is set
the configChangeGrandParentObjectIndex will represent
a 'Line Index' which in turn has the following
special meaning in FRSM-2CT3 cards.
- configChangeParentObjectIndex range between 1..56
indicates that the configuration change refers to the DS1 line
index. A value of (128 + n) refers to DS3 line index
numbered 'n'.
This object is applicable only in traps.
A GET on this may not return a useful result.
This object is not applicable to MGX 8850
release 1.x.x and MGX8220.
Grand Parent object index, could be
- line index
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This object is applicable only when configChangeParentObjectIndex
represents a port index.
Following specifies the mapping between the
configChangeParentObjectIndex and its corresponding
configChangeGrandParentObjectIndex.
When the 'Port Configuration Change' bit is set
the configChangeGrandParentObjectIndex will represent
a 'Line Index' which in turn has the following
special meaning in FRSM-2CT3 cards.
- configChangeParentObjectIndex range between 1..56
indicates that the configuration change refers to the DS1 line
index. A value of (128 + n) refers to DS3 line index
numbered 'n'.
This object is applicable only in traps.
A GET on this may not return a useful result.
This object is not applicable to MGX 8850
release 1.x.x and MGX8220.
Parsed from file BASIS-GENERIC-MIB.my.txt
Company: None
Module: BASIS-GENERIC-MIB
Grand Parent object index, could be
- line index
This object will indicate the index of the immediate
higher level object (line) of configChangeParentObjectIndex.
This object is applicable only when configChangeParentObjectIndex
represents a port index.
Following specifies the mapping between the
configChangeParentObjectIndex and its corresponding
configChangeGrandParentObjectIndex.
When the 'Port Configuration Change' bit is set
the configChangeGrandParentObjectIndex will represent
a 'Line Index' which in turn has the following
special meaning in FRSM-2CT3 cards.
- configChangeParentObjectIndex range between 1..56
indicates that the configuration change refers to the DS1 line
index. A value of (128 + n) refers to DS3 line index
numbered 'n'.
This object is applicable only in traps.
A GET on this may not return a useful result.
This object is not applicable to MGX 8850
release 1.x.x and MGX8220.
configChangeGrandParentObjectIndex OBJECT-TYPE SYNTAX INTEGER (1..1024) ACCESS read-only STATUS mandatory DESCRIPTION " Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) of configChangeParentObjectIndex. This object is applicable only when configChangeParentObjectIndex represents a port index. Following specifies the mapping between the configChangeParentObjectIndex and its corresponding configChangeGrandParentObjectIndex. When the 'Port Configuration Change' bit is set the configChangeGrandParentObjectIndex will represent a 'Line Index' which in turn has the following special meaning in FRSM-2CT3 cards. - configChangeParentObjectIndex range between 1..56 indicates that the configuration change refers to the DS1 line index. A value of (128 + n) refers to DS3 line index numbered 'n'. This object is applicable only in traps. A GET on this may not return a useful result. This object is not applicable to MGX 8850 release 1.x.x and MGX8220." ::= { cardInformation 34 }
configChangeGrandParentObjectIndex OBJECT-TYPE SYNTAX INTEGER(1..1024) ACCESS read-only STATUS mandatory DESCRIPTION " Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) of configChangeParentObjectIndex. This object is applicable only when configChangeParentObjectIndex represents a port index. Following specifies the mapping between the configChangeParentObjectIndex and its corresponding configChangeGrandParentObjectIndex. When the 'Port Configuration Change' bit is set the configChangeGrandParentObjectIndex will represent a 'Line Index' which in turn has the following special meaning in FRSM-2CT3 cards. - configChangeParentObjectIndex range between 1..56 indicates that the configuration change refers to the DS1 line index. A value of (128 + n) refers to DS3 line index numbered 'n'. This object is applicable only in traps. A GET on this may not return a useful result. This object is not applicable to MGX 8850 release 1.x.x and MGX8220." ::= { cardInformation 34 }
Vendor: Stratacom
Module: BASIS-GENERIC-MIB
[Automatically extracted from oidview.com]
configChangeGrandParentObjectIndex OBJECT-TYPE SYNTAX INTEGER (1..1024) ACCESS read-only STATUS mandatory DESCRIPTION " Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) of configChangeParentObjectIndex. This object is applicable only when configChangeParentObjectIndex represents a port index. Following specifies the mapping between the configChangeParentObjectIndex and its corresponding configChangeGrandParentObjectIndex. When the 'Port Configuration Change' bit is set the configChangeGrandParentObjectIndex will represent a 'Line Index' which in turn has the following special meaning in FRSM-2CT3 cards. - configChangeParentObjectIndex range between 1..56 indicates that the configuration change refers to the DS1 line index. A value of (128 + n) refers to DS3 line index numbered 'n'. This object is applicable only in traps. A GET on this may not return a useful result. This object is not applicable to MGX 8850 release 1.x.x and MGX8220." ::= { cardInformation 34 }
configChangeGrandParentObjectIndex OBJECT-TYPE SYNTAX INTEGER (1..1024) ACCESS read-only STATUS mandatory DESCRIPTION " Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) of configChangeParentObjectIndex. This object is applicable only when configChangeParentObjectIndex represents a port index. Following specifies the mapping between the configChangeParentObjectIndex and its corresponding configChangeGrandParentObjectIndex. When the 'Port Configuration Change' bit is set the configChangeGrandParentObjectIndex will represent a 'Line Index' which in turn has the following special meaning in FRSM-2CT3 cards. - configChangeParentObjectIndex range between 1..56 indicates that the configuration change refers to the DS1 line index. A value of (128 + n) refers to DS3 line index numbered 'n'. This object is applicable only in traps. A GET on this may not return a useful result. This object is not applicable to MGX 8850 release 1.x.x and MGX8220." ::= { cardInformation 34 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.2.1.34.0 | configChangeGrandParentObjectIndex | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.2.1.1 | moduleSlotNumber | 1 | 1 | Slot number this card is present |
1.3.6.1.4.1.351.110.2.1.2 | functionModuleType | 1 | 1 | This object holds the type of the card. The card can type is for Processor module as well as service module. |
1.3.6.1.4.1.351.110.2.1.3 | functionModuleDescription | 1 | 1 | Describes the card |
1.3.6.1.4.1.351.110.2.1.4 | functionModuleSerialNum | 1 | 1 | Serial number of the function Module. |
1.3.6.1.4.1.351.110.2.1.5 | functionModuleHWRev | 1 | 1 | Hardware revision number for function Module. |
1.3.6.1.4.1.351.110.2.1.6 | functionModuleFWRev | 1 | 1 | Firmware revision number of the function Module. |
1.3.6.1.4.1.351.110.2.1.7 | functionModuleState | 1 | 1 | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. st… |
1.3.6.1.4.1.351.110.2.1.8 | functionModuleResetReason | 1 | 1 | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) … |
1.3.6.1.4.1.351.110.2.1.9 | lineModuleType | 1 | 1 | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physica… |
1.3.6.1.4.1.351.110.2.1.10 | lineModuleDescription | 1 | 1 | This object contains description of the line module. |
1.3.6.1.4.1.351.110.2.1.11 | lineModuleSerialNum | 1 | 1 | This object contains Serial number of the line module. |
1.3.6.1.4.1.351.110.2.1.12 | lineModuleHWRev | 1 | 1 | This object contains Hardware revision for line module. |
1.3.6.1.4.1.351.110.2.1.13 | lineModuleFWRev | 1 | 1 | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet st… |
1.3.6.1.4.1.351.110.2.1.14 | lineModuleState | 1 | 1 | line module status. |
1.3.6.1.4.1.351.110.2.1.15 | moduleTrapAlarmSeverity | 1 | 1 | This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not suppo… |
1.3.6.1.4.1.351.110.2.1.16 | mibVersionNumber | 1 | 1 | MIB version number. Updated when any part of the MIB changes. |
1.3.6.1.4.1.351.110.2.1.17 | configChangeTypeBitMap | 1 | 1 | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Conf… |
1.3.6.1.4.1.351.110.2.1.18 | configChangeObjectIndex | 1 | 1 | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port res… |
1.3.6.1.4.1.351.110.2.1.19 | configChangeStatus | 1 | 1 | This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as… |
1.3.6.1.4.1.351.110.2.1.20 | cardIntegratedAlarmBitMap | 1 | 1 | Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/hel… |
1.3.6.1.4.1.351.110.2.1.21 | cleiCode | 1 | 1 | Common Language Equipment(CLEI) Code. |
1.3.6.1.4.1.351.110.2.1.22 | macAddress | 1 | 1 | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
1.3.6.1.4.1.351.110.2.1.23 | macAddrBlkSize | 1 | 1 | The MAC address block size, entered by manufacturing. |
1.3.6.1.4.1.351.110.2.1.24 | finalTestTechnician | 1 | 1 | The Final Test Technician Employee Identification Number. |
1.3.6.1.4.1.351.110.2.1.25 | hwFailures | 1 | 1 | Hardware failure code. |
1.3.6.1.4.1.351.110.2.1.26 | hwHistory | 1 | 1 | RMA Test History - RMA Failure Code. |
1.3.6.1.4.1.351.110.2.1.27 | secLineModuleType | 1 | 1 | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally… |
1.3.6.1.4.1.351.110.2.1.28 | secLineModuleDescription | 1 | 1 | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.29 | secLineModuleSerialNum | 1 | 1 | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.30 | secLineModuleHWRev | 1 | 1 | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.31 | secLineModuleFWRev | 1 | 1 | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revi… |
1.3.6.1.4.1.351.110.2.1.32 | secLineModuleState | 1 | 1 | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.33 | configChangeParentObjectIndex | 1 | 1 | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (l… |
1.3.6.1.4.1.351.110.2.1.35 | configChangeSMSpecificObject | 1 | 1 | configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in diffe… |
1.3.6.1.4.1.351.110.2.1.36 | transId | 1 | 1 | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented b… |