Bit position represents the different types of alarm
for ASC:
bit 0: ShelfFunctionModuleState (BNM only)
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (BNM only) (notPresent/invalid)
bit 2: ASMPhysicalAlarmState (BNM only)
bit 3: ATMLMIFailure (ASC only)
bit 4: LineAlarmState (BNM only)
bit 5: LineStatisticalAlarmState (BNM only)
bit 6: PLCPAlarmState (BNM only)
bit 7: PLCPStatisticalAlarmState (BNM only)
bit 8: SmConnectionFailureAlarm
for SM:
bit 0: ShelfFunctionModuleState
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (notPresent/invalid)
bit 2: PortLMIFailure
bit 3: LineAlarmState
bit 4: LineStatisticalAlarmState
bit 5: FrameRelayPortState (RemoteLoopback/
FailedDueToLine/
FailedDueToSig)
bit 6: ChannelState
for PXM/SRM Only (MGX8850 Platfrom):
Only those marked with SRM are valid for both PXM/SRM.
The rest are valid only for PXM.
bit 0 : ShelfFunctionModuleState
bit 1 : Backcard Line Module (SRM/PXM)
This Alarm is generated when the Line Module
(Trunk Backcard) is removed or goes to a mismatch
state(or backcard type is unknown).
bit 2 : Backcard UIModule
This Alarm is generated when the UI backcard is
removed or goes to a mismatch state
(or backcard type is unknown).
bit 3 : ASM Physical Alarm
This specifies whether any of the
environmental monitoring components like
Temperature, Voltage Supply, Fan Speed
have gone into alarm.
bit 4 : ATM LMI Failure
bit 5 : Line Alarm (SRM/PXM)
bit 6 : Line Statistical Alarm (SRM/PXM)
bit 7 : Lines Alarm (SRM/PXM)
bit 8 : PLCP Alarm
bit 9 : PLCP Statistical Alarm
bit 10 : Connections exist on removed SM
bit 11 : Disk related Failure on first PXM slot
bit 12 : Disk related Failure on second PXM slot
The Disk Alarms are generated when any of the
file operations on Disk like open,read,write,
lseek etc fail.
VSM Alarms
bit 13 : Port LMI Failure
bit 14 : Port State Alarm
bit 15 : Channel Shelf Alarm
bit 16 : Taskmon Task Suspended
bit 17 : Excess Power Consumption
bit 30 : bit set(1) major alarm, else (0) minor alarm
Parsed from file BASIS-GENERIC-MIB.mib
Module: BASIS-GENERIC-MIB
Bit position represents the different types of alarm
for ASC:
bit 0: ShelfFunctionModuleState (BNM only)
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (BNM only) (notPresent/invalid)
bit 2: ASMPhysicalAlarmState (BNM only)
bit 3: ATMLMIFailure (ASC only)
bit 4: LineAlarmState (BNM only)
bit 5: LineStatisticalAlarmState (BNM only)
bit 6: PLCPAlarmState (BNM only)
bit 7: PLCPStatisticalAlarmState (BNM only)
bit 8: SmConnectionFailureAlarm
for SM:
bit 0: ShelfFunctionModuleState
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (notPresent/invalid)
bit 2: PortLMIFailure
bit 3: LineAlarmState
bit 4: LineStatisticalAlarmState
bit 5: FrameRelayPortState (RemoteLoopback/
FailedDueToLine/
FailedDueToSig)
bit 6: ChannelState
for PXM/SRM Only (MGX8850 Platfrom):
Only those marked with SRM are valid for both PXM/SRM.
The rest are valid only for PXM.
bit 0 : ShelfFunctionModuleState
bit 1 : Backcard Line Module (SRM/PXM)
This Alarm is generated when the Line Module
(Trunk Backcard) is removed or goes to a mismatch
state(or backcard type is unknown).
bit 2 : Backcard UIModule
This Alarm is generated when the UI backcard is
removed or goes to a mismatch state
(or backcard type is unknown).
bit 3 : ASM Physical Alarm
This specifies whether any of the
environmental monitoring components like
Temperature, Voltage Supply, Fan Speed
have gone into alarm.
bit 4 : ATM LMI Failure
bit 5 : Line Alarm (SRM/PXM)
bit 6 : Line Statistical Alarm (SRM/PXM)
bit 7 : Lines Alarm (SRM/PXM)
bit 8 : PLCP Alarm
bit 9 : PLCP Statistical Alarm
bit 10 : Connections exist on removed SM
bit 11 : Disk related Failure on first PXM slot
bit 12 : Disk related Failure on second PXM slot
The Disk Alarms are generated when any of the
file operations on Disk like open,read,write,
lseek etc fail.
VSM Alarms
bit 13 : Port LMI Failure
bit 14 : Port State Alarm
bit 15 : Channel Shelf Alarm
bit 16 : Taskmon Task Suspended
bit 17 : Excess Power Consumption
bit 30 : bit set(1) major alarm, else (0) minor alarm
Bit position represents the different types of alarm
for ASC:
bit 0: ShelfFunctionModuleState (BNM only)
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (BNM only) (notPresent/invalid)
bit 2: ASMPhysicalAlarmState (BNM only)
bit 3: ATMLMIFailure (ASC only)
bit 4: LineAlarmState (BNM only)
bit 5: LineStatisticalAlarmState (BNM only)
bit 6: PLCPAlarmState (BNM only)
bit 7: PLCPStatisticalAlarmState (BNM only)
bit 8: SmConnectionFailureAlarm
for SM:
bit 0: ShelfFunctionModuleState
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (notPresent/invalid)
bit 2: PortLMIFailure
bit 3: LineAlarmState
bit 4: LineStatisticalAlarmState
bit 5: FrameRelayPortState (RemoteLoopback/
FailedDueToLine/
FailedDueToSig)
bit 6: ChannelState
for PXM/SRM Only (MGX8850 Platfrom):
Only those marked with SRM are valid for both PXM/SRM.
The rest are valid only for PXM.
bit 0 : ShelfFunctionModuleState
bit 1 : Backcard Line Module (SRM/PXM)
This Alarm is generated when the Line Module
(Trunk Backcard) is removed or goes to a mismatch
state(or backcard type is unknown).
bit 2 : Backcard UIModule
This Alarm is generated when the UI backcard is
removed or goes to a mismatch state
(or backcard type is unknown).
bit 3 : ASM Physical Alarm
This specifies whether any of the
environmental monitoring components like
Temperature, Voltage Supply, Fan Speed
have gone into alarm.
bit 4 : ATM LMI Failure
bit 5 : Line Alarm (SRM/PXM)
bit 6 : Line Statistical Alarm (SRM/PXM)
bit 7 : Lines Alarm (SRM/PXM)
bit 8 : PLCP Alarm
bit 9 : PLCP Statistical Alarm
bit 10 : Connections exist on removed SM
bit 11 : Disk related Failure on first PXM slot
bit 12 : Disk related Failure on second PXM slot
The Disk Alarms are generated when any of the
file operations on Disk like open,read,write,
lseek etc fail.
VSM Alarms
bit 13 : Port LMI Failure
bit 14 : Port State Alarm
bit 15 : Channel Shelf Alarm
bit 16 : Taskmon Task Suspended
bit 17 : Excess Power Consumption
bit 30 : bit set(1) major alarm, else (0) minor alarm
Parsed from file BASIS-GENERIC-MIB.my.txt
Company: None
Module: BASIS-GENERIC-MIB
Bit position represents the different types of alarm
for ASC:
bit 0: ShelfFunctionModuleState (BNM only)
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (BNM only) (notPresent/invalid)
bit 2: ASMPhysicalAlarmState (BNM only)
bit 3: ATMLMIFailure (ASC only)
bit 4: LineAlarmState (BNM only)
bit 5: LineStatisticalAlarmState (BNM only)
bit 6: PLCPAlarmState (BNM only)
bit 7: PLCPStatisticalAlarmState (BNM only)
bit 8: SmConnectionFailureAlarm
for SM:
bit 0: ShelfFunctionModuleState
(failed/boot/mismatch/heldinReset)
bit 1: LineModuleState (notPresent/invalid)
bit 2: PortLMIFailure
bit 3: LineAlarmState
bit 4: LineStatisticalAlarmState
bit 5: FrameRelayPortState (RemoteLoopback/
FailedDueToLine/
FailedDueToSig)
bit 6: ChannelState
for PXM/SRM Only (MGX8850 Platfrom):
Only those marked with SRM are valid for both PXM/SRM.
The rest are valid only for PXM.
bit 0 : ShelfFunctionModuleState
bit 1 : Backcard Line Module (SRM/PXM)
This Alarm is generated when the Line Module
(Trunk Backcard) is removed or goes to a mismatch
state(or backcard type is unknown).
bit 2 : Backcard UIModule
This Alarm is generated when the UI backcard is
removed or goes to a mismatch state
(or backcard type is unknown).
bit 3 : ASM Physical Alarm
This specifies whether any of the
environmental monitoring components like
Temperature, Voltage Supply, Fan Speed
have gone into alarm.
bit 4 : ATM LMI Failure
bit 5 : Line Alarm (SRM/PXM)
bit 6 : Line Statistical Alarm (SRM/PXM)
bit 7 : Lines Alarm (SRM/PXM)
bit 8 : PLCP Alarm
bit 9 : PLCP Statistical Alarm
bit 10 : Connections exist on removed SM
bit 11 : Disk related Failure on first PXM slot
bit 12 : Disk related Failure on second PXM slot
The Disk Alarms are generated when any of the
file operations on Disk like open,read,write,
lseek etc fail.
VSM Alarms
bit 13 : Port LMI Failure
bit 14 : Port State Alarm
bit 15 : Channel Shelf Alarm
bit 16 : Taskmon Task Suspended
bit 17 : Excess Power Consumption
bit 30 : bit set(1) major alarm, else (0) minor alarm
cardIntegratedAlarmBitMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (BNM only) (notPresent/invalid) bit 2: ASMPhysicalAlarmState (BNM only) bit 3: ATMLMIFailure (ASC only) bit 4: LineAlarmState (BNM only) bit 5: LineStatisticalAlarmState (BNM only) bit 6: PLCPAlarmState (BNM only) bit 7: PLCPStatisticalAlarmState (BNM only) bit 8: SmConnectionFailureAlarm for SM: bit 0: ShelfFunctionModuleState (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (notPresent/invalid) bit 2: PortLMIFailure bit 3: LineAlarmState bit 4: LineStatisticalAlarmState bit 5: FrameRelayPortState (RemoteLoopback/ FailedDueToLine/ FailedDueToSig) bit 6: ChannelState for PXM/SRM Only (MGX8850 Platfrom): Only those marked with SRM are valid for both PXM/SRM. The rest are valid only for PXM. bit 0 : ShelfFunctionModuleState bit 1 : Backcard Line Module (SRM/PXM) This Alarm is generated when the Line Module (Trunk Backcard) is removed or goes to a mismatch state(or backcard type is unknown). bit 2 : Backcard UIModule This Alarm is generated when the UI backcard is removed or goes to a mismatch state (or backcard type is unknown). bit 3 : ASM Physical Alarm This specifies whether any of the environmental monitoring components like Temperature, Voltage Supply, Fan Speed have gone into alarm. bit 4 : ATM LMI Failure bit 5 : Line Alarm (SRM/PXM) bit 6 : Line Statistical Alarm (SRM/PXM) bit 7 : Lines Alarm (SRM/PXM) bit 8 : PLCP Alarm bit 9 : PLCP Statistical Alarm bit 10 : Connections exist on removed SM bit 11 : Disk related Failure on first PXM slot bit 12 : Disk related Failure on second PXM slot The Disk Alarms are generated when any of the file operations on Disk like open,read,write, lseek etc fail. VSM Alarms bit 13 : Port LMI Failure bit 14 : Port State Alarm bit 15 : Channel Shelf Alarm bit 16 : Taskmon Task Suspended bit 17 : Excess Power Consumption bit 30 : bit set(1) major alarm, else (0) minor alarm " DEFVAL {0} ::= { cardInformation 20 }
cardIntegratedAlarmBitMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (BNM only) (notPresent/invalid) bit 2: ASMPhysicalAlarmState (BNM only) bit 3: ATMLMIFailure (ASC only) bit 4: LineAlarmState (BNM only) bit 5: LineStatisticalAlarmState (BNM only) bit 6: PLCPAlarmState (BNM only) bit 7: PLCPStatisticalAlarmState (BNM only) bit 8: SmConnectionFailureAlarm for SM: bit 0: ShelfFunctionModuleState (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (notPresent/invalid) bit 2: PortLMIFailure bit 3: LineAlarmState bit 4: LineStatisticalAlarmState bit 5: FrameRelayPortState (RemoteLoopback/ FailedDueToLine/ FailedDueToSig) bit 6: ChannelState for PXM/SRM Only (MGX8850 Platfrom): Only those marked with SRM are valid for both PXM/SRM. The rest are valid only for PXM. bit 0 : ShelfFunctionModuleState bit 1 : Backcard Line Module (SRM/PXM) This Alarm is generated when the Line Module (Trunk Backcard) is removed or goes to a mismatch state(or backcard type is unknown). bit 2 : Backcard UIModule This Alarm is generated when the UI backcard is removed or goes to a mismatch state (or backcard type is unknown). bit 3 : ASM Physical Alarm This specifies whether any of the environmental monitoring components like Temperature, Voltage Supply, Fan Speed have gone into alarm. bit 4 : ATM LMI Failure bit 5 : Line Alarm (SRM/PXM) bit 6 : Line Statistical Alarm (SRM/PXM) bit 7 : Lines Alarm (SRM/PXM) bit 8 : PLCP Alarm bit 9 : PLCP Statistical Alarm bit 10 : Connections exist on removed SM bit 11 : Disk related Failure on first PXM slot bit 12 : Disk related Failure on second PXM slot The Disk Alarms are generated when any of the file operations on Disk like open,read,write, lseek etc fail. VSM Alarms bit 13 : Port LMI Failure bit 14 : Port State Alarm bit 15 : Channel Shelf Alarm bit 16 : Taskmon Task Suspended bit 17 : Excess Power Consumption bit 30 : bit set(1) major alarm, else (0) minor alarm " DEFVAL { 0 } ::= { cardInformation 20 }
Vendor: Stratacom
Module: BASIS-GENERIC-MIB
[Automatically extracted from oidview.com]
cardIntegratedAlarmBitMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (BNM only) (notPresent/invalid) bit 2: ASMPhysicalAlarmState (BNM only) bit 3: ATMLMIFailure (ASC only) bit 4: LineAlarmState (BNM only) bit 5: LineStatisticalAlarmState (BNM only) bit 6: PLCPAlarmState (BNM only) bit 7: PLCPStatisticalAlarmState (BNM only) bit 8: SmConnectionFailureAlarm for SM: bit 0: ShelfFunctionModuleState (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (notPresent/invalid) bit 2: PortLMIFailure bit 3: LineAlarmState bit 4: LineStatisticalAlarmState bit 5: FrameRelayPortState (RemoteLoopback/ FailedDueToLine/ FailedDueToSig) bit 6: ChannelState for PXM/SRM Only (MGX8850 Platfrom): Only those marked with SRM are valid for both PXM/SRM. The rest are valid only for PXM. bit 0 : ShelfFunctionModuleState bit 1 : Backcard Line Module (SRM/PXM) This Alarm is generated when the Line Module (Trunk Backcard) is removed or goes to a mismatch state(or backcard type is unknown). bit 2 : Backcard UIModule This Alarm is generated when the UI backcard is removed or goes to a mismatch state (or backcard type is unknown). bit 3 : ASM Physical Alarm This specifies whether any of the environmental monitoring components like Temperature, Voltage Supply, Fan Speed have gone into alarm. bit 4 : ATM LMI Failure bit 5 : Line Alarm (SRM/PXM) bit 6 : Line Statistical Alarm (SRM/PXM) bit 7 : Lines Alarm (SRM/PXM) bit 8 : PLCP Alarm bit 9 : PLCP Statistical Alarm bit 10 : Connections exist on removed SM bit 11 : Disk related Failure on first PXM slot bit 12 : Disk related Failure on second PXM slot The Disk Alarms are generated when any of the file operations on Disk like open,read,write, lseek etc fail. VSM Alarms bit 13 : Port LMI Failure bit 14 : Port State Alarm bit 15 : Channel Shelf Alarm bit 16 : Taskmon Task Suspended bit 17 : Excess Power Consumption bit 30 : bit set(1) major alarm, else (0) minor alarm " DEFVAL {0} ::= { cardInformation 20 }
cardIntegratedAlarmBitMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (BNM only) (notPresent/invalid) bit 2: ASMPhysicalAlarmState (BNM only) bit 3: ATMLMIFailure (ASC only) bit 4: LineAlarmState (BNM only) bit 5: LineStatisticalAlarmState (BNM only) bit 6: PLCPAlarmState (BNM only) bit 7: PLCPStatisticalAlarmState (BNM only) bit 8: SmConnectionFailureAlarm for SM: bit 0: ShelfFunctionModuleState (failed/boot/mismatch/heldinReset) bit 1: LineModuleState (notPresent/invalid) bit 2: PortLMIFailure bit 3: LineAlarmState bit 4: LineStatisticalAlarmState bit 5: FrameRelayPortState (RemoteLoopback/ FailedDueToLine/ FailedDueToSig) bit 6: ChannelState for PXM/SRM Only (MGX8850 Platfrom): Only those marked with SRM are valid for both PXM/SRM. The rest are valid only for PXM. bit 0 : ShelfFunctionModuleState bit 1 : Backcard Line Module (SRM/PXM) This Alarm is generated when the Line Module (Trunk Backcard) is removed or goes to a mismatch state(or backcard type is unknown). bit 2 : Backcard UIModule This Alarm is generated when the UI backcard is removed or goes to a mismatch state (or backcard type is unknown). bit 3 : ASM Physical Alarm This specifies whether any of the environmental monitoring components like Temperature, Voltage Supply, Fan Speed have gone into alarm. bit 4 : ATM LMI Failure bit 5 : Line Alarm (SRM/PXM) bit 6 : Line Statistical Alarm (SRM/PXM) bit 7 : Lines Alarm (SRM/PXM) bit 8 : PLCP Alarm bit 9 : PLCP Statistical Alarm bit 10 : Connections exist on removed SM bit 11 : Disk related Failure on first PXM slot bit 12 : Disk related Failure on second PXM slot The Disk Alarms are generated when any of the file operations on Disk like open,read,write, lseek etc fail. VSM Alarms bit 13 : Port LMI Failure bit 14 : Port State Alarm bit 15 : Channel Shelf Alarm bit 16 : Taskmon Task Suspended bit 17 : Excess Power Consumption bit 30 : bit set(1) major alarm, else (0) minor alarm " DEFVAL {0} ::= { cardInformation 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.20.0 | cardIntegratedAlarmBitMap | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.1 | moduleSlotNumber | 1 | 1 | Slot number this card is present |
| 1.3.6.1.4.1.351.110.2.1.2 | functionModuleType | 1 | 1 | This object holds the type of the card. The card can type is for Processor module as well as service module. |
| 1.3.6.1.4.1.351.110.2.1.3 | functionModuleDescription | 1 | 1 | Describes the card |
| 1.3.6.1.4.1.351.110.2.1.4 | functionModuleSerialNum | 1 | 1 | Serial number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.5 | functionModuleHWRev | 1 | 1 | Hardware revision number for function Module. |
| 1.3.6.1.4.1.351.110.2.1.6 | functionModuleFWRev | 1 | 1 | Firmware revision number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.7 | functionModuleState | 1 | 1 | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. st… |
| 1.3.6.1.4.1.351.110.2.1.8 | functionModuleResetReason | 1 | 1 | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) … |
| 1.3.6.1.4.1.351.110.2.1.9 | lineModuleType | 1 | 1 | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physica… |
| 1.3.6.1.4.1.351.110.2.1.10 | lineModuleDescription | 1 | 1 | This object contains description of the line module. |
| 1.3.6.1.4.1.351.110.2.1.11 | lineModuleSerialNum | 1 | 1 | This object contains Serial number of the line module. |
| 1.3.6.1.4.1.351.110.2.1.12 | lineModuleHWRev | 1 | 1 | This object contains Hardware revision for line module. |
| 1.3.6.1.4.1.351.110.2.1.13 | lineModuleFWRev | 1 | 1 | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet st… |
| 1.3.6.1.4.1.351.110.2.1.14 | lineModuleState | 1 | 1 | line module status. |
| 1.3.6.1.4.1.351.110.2.1.15 | moduleTrapAlarmSeverity | 1 | 1 | This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not suppo… |
| 1.3.6.1.4.1.351.110.2.1.16 | mibVersionNumber | 1 | 1 | MIB version number. Updated when any part of the MIB changes. |
| 1.3.6.1.4.1.351.110.2.1.17 | configChangeTypeBitMap | 1 | 1 | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Conf… |
| 1.3.6.1.4.1.351.110.2.1.18 | configChangeObjectIndex | 1 | 1 | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port res… |
| 1.3.6.1.4.1.351.110.2.1.19 | configChangeStatus | 1 | 1 | This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as… |
| 1.3.6.1.4.1.351.110.2.1.21 | cleiCode | 1 | 1 | Common Language Equipment(CLEI) Code. |
| 1.3.6.1.4.1.351.110.2.1.22 | macAddress | 1 | 1 | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
| 1.3.6.1.4.1.351.110.2.1.23 | macAddrBlkSize | 1 | 1 | The MAC address block size, entered by manufacturing. |
| 1.3.6.1.4.1.351.110.2.1.24 | finalTestTechnician | 1 | 1 | The Final Test Technician Employee Identification Number. |
| 1.3.6.1.4.1.351.110.2.1.25 | hwFailures | 1 | 1 | Hardware failure code. |
| 1.3.6.1.4.1.351.110.2.1.26 | hwHistory | 1 | 1 | RMA Test History - RMA Failure Code. |
| 1.3.6.1.4.1.351.110.2.1.27 | secLineModuleType | 1 | 1 | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally… |
| 1.3.6.1.4.1.351.110.2.1.28 | secLineModuleDescription | 1 | 1 | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.29 | secLineModuleSerialNum | 1 | 1 | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.30 | secLineModuleHWRev | 1 | 1 | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.31 | secLineModuleFWRev | 1 | 1 | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revi… |
| 1.3.6.1.4.1.351.110.2.1.32 | secLineModuleState | 1 | 1 | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.33 | configChangeParentObjectIndex | 1 | 1 | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (l… |
| 1.3.6.1.4.1.351.110.2.1.34 | configChangeGrandParentObjectIndex | 1 | 1 | Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) o… |
| 1.3.6.1.4.1.351.110.2.1.35 | configChangeSMSpecificObject | 1 | 1 | configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in diffe… |
| 1.3.6.1.4.1.351.110.2.1.36 | transId | 1 | 1 | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented b… |