configChangeSMSpecificObject is a generic object
which is Service Module Specific. It can be used
for different purposes in different cards. The
usage of the same with regard to very card type is
listed below.
FRSM-8T1E1 - used to store portDs0ConfigBitMap
FRSM-VHS - used to store portDs0ConfigBitMap
CESM-8T1E1 - used to store cesPortDs0ConfigBitMap
CESM-T3E3 - not used
AUSM-8T1E1 - not used
This object is not applicable to MGX 8850
Release 1.x.x and MGX8220.
Parsed from file BASIS-GENERIC-MIB.mib
Module: BASIS-GENERIC-MIB
configChangeSMSpecificObject is a generic object
which is Service Module Specific. It can be used
for different purposes in different cards. The
usage of the same with regard to very card type is
listed below.
FRSM-8T1E1 - used to store portDs0ConfigBitMap
FRSM-VHS - used to store portDs0ConfigBitMap
CESM-8T1E1 - used to store cesPortDs0ConfigBitMap
CESM-T3E3 - not used
AUSM-8T1E1 - not used
This object is not applicable to MGX 8850
Release 1.x.x and MGX8220.
configChangeSMSpecificObject is a generic object
which is Service Module Specific. It can be used
for different purposes in different cards. The
usage of the same with regard to very card type is
listed below.
FRSM-8T1E1 - used to store portDs0ConfigBitMap
FRSM-VHS - used to store portDs0ConfigBitMap
CESM-8T1E1 - used to store cesPortDs0ConfigBitMap
CESM-T3E3 - not used
AUSM-8T1E1 - not used
This object is not applicable to MGX 8850
Release 1.x.x and MGX8220.
Parsed from file BASIS-GENERIC-MIB.my.txt
Company: None
Module: BASIS-GENERIC-MIB
configChangeSMSpecificObject is a generic object
which is Service Module Specific. It can be used
for different purposes in different cards. The
usage of the same with regard to very card type is
listed below.
FRSM-8T1E1 - used to store portDs0ConfigBitMap
FRSM-VHS - used to store portDs0ConfigBitMap
CESM-8T1E1 - used to store cesPortDs0ConfigBitMap
CESM-T3E3 - not used
AUSM-8T1E1 - not used
This object is not applicable to MGX 8850
Release 1.x.x and MGX8220.
configChangeSMSpecificObject OBJECT-TYPE SYNTAX INTEGER (0..'ffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION " configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the same with regard to very card type is listed below. FRSM-8T1E1 - used to store portDs0ConfigBitMap FRSM-VHS - used to store portDs0ConfigBitMap CESM-8T1E1 - used to store cesPortDs0ConfigBitMap CESM-T3E3 - not used AUSM-8T1E1 - not used This object is not applicable to MGX 8850 Release 1.x.x and MGX8220." ::= { cardInformation 35 }
configChangeSMSpecificObject OBJECT-TYPE SYNTAX INTEGER(0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION " configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the same with regard to very card type is listed below. FRSM-8T1E1 - used to store portDs0ConfigBitMap FRSM-VHS - used to store portDs0ConfigBitMap CESM-8T1E1 - used to store cesPortDs0ConfigBitMap CESM-T3E3 - not used AUSM-8T1E1 - not used This object is not applicable to MGX 8850 Release 1.x.x and MGX8220." ::= { cardInformation 35 }
Vendor: Stratacom
Module: BASIS-GENERIC-MIB
[Automatically extracted from oidview.com]
configChangeSMSpecificObject OBJECT-TYPE SYNTAX INTEGER (0..'ffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION " configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the same with regard to very card type is listed below. FRSM-8T1E1 - used to store portDs0ConfigBitMap FRSM-VHS - used to store portDs0ConfigBitMap CESM-8T1E1 - used to store cesPortDs0ConfigBitMap CESM-T3E3 - not used AUSM-8T1E1 - not used This object is not applicable to MGX 8850 Release 1.x.x and MGX8220." ::= { cardInformation 35 }
configChangeSMSpecificObject OBJECT-TYPE SYNTAX INTEGER (0..'ffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION " configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in different cards. The usage of the same with regard to very card type is listed below. FRSM-8T1E1 - used to store portDs0ConfigBitMap FRSM-VHS - used to store portDs0ConfigBitMap CESM-8T1E1 - used to store cesPortDs0ConfigBitMap CESM-T3E3 - not used AUSM-8T1E1 - not used This object is not applicable to MGX 8850 Release 1.x.x and MGX8220." ::= { cardInformation 35 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.2.1.35.0 | configChangeSMSpecificObject | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.2.1.1 | moduleSlotNumber | 1 | 1 | Slot number this card is present |
1.3.6.1.4.1.351.110.2.1.2 | functionModuleType | 1 | 1 | This object holds the type of the card. The card can type is for Processor module as well as service module. |
1.3.6.1.4.1.351.110.2.1.3 | functionModuleDescription | 1 | 1 | Describes the card |
1.3.6.1.4.1.351.110.2.1.4 | functionModuleSerialNum | 1 | 1 | Serial number of the function Module. |
1.3.6.1.4.1.351.110.2.1.5 | functionModuleHWRev | 1 | 1 | Hardware revision number for function Module. |
1.3.6.1.4.1.351.110.2.1.6 | functionModuleFWRev | 1 | 1 | Firmware revision number of the function Module. |
1.3.6.1.4.1.351.110.2.1.7 | functionModuleState | 1 | 1 | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. st… |
1.3.6.1.4.1.351.110.2.1.8 | functionModuleResetReason | 1 | 1 | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) … |
1.3.6.1.4.1.351.110.2.1.9 | lineModuleType | 1 | 1 | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physica… |
1.3.6.1.4.1.351.110.2.1.10 | lineModuleDescription | 1 | 1 | This object contains description of the line module. |
1.3.6.1.4.1.351.110.2.1.11 | lineModuleSerialNum | 1 | 1 | This object contains Serial number of the line module. |
1.3.6.1.4.1.351.110.2.1.12 | lineModuleHWRev | 1 | 1 | This object contains Hardware revision for line module. |
1.3.6.1.4.1.351.110.2.1.13 | lineModuleFWRev | 1 | 1 | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet st… |
1.3.6.1.4.1.351.110.2.1.14 | lineModuleState | 1 | 1 | line module status. |
1.3.6.1.4.1.351.110.2.1.15 | moduleTrapAlarmSeverity | 1 | 1 | This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not suppo… |
1.3.6.1.4.1.351.110.2.1.16 | mibVersionNumber | 1 | 1 | MIB version number. Updated when any part of the MIB changes. |
1.3.6.1.4.1.351.110.2.1.17 | configChangeTypeBitMap | 1 | 1 | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Conf… |
1.3.6.1.4.1.351.110.2.1.18 | configChangeObjectIndex | 1 | 1 | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port res… |
1.3.6.1.4.1.351.110.2.1.19 | configChangeStatus | 1 | 1 | This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as… |
1.3.6.1.4.1.351.110.2.1.20 | cardIntegratedAlarmBitMap | 1 | 1 | Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/hel… |
1.3.6.1.4.1.351.110.2.1.21 | cleiCode | 1 | 1 | Common Language Equipment(CLEI) Code. |
1.3.6.1.4.1.351.110.2.1.22 | macAddress | 1 | 1 | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
1.3.6.1.4.1.351.110.2.1.23 | macAddrBlkSize | 1 | 1 | The MAC address block size, entered by manufacturing. |
1.3.6.1.4.1.351.110.2.1.24 | finalTestTechnician | 1 | 1 | The Final Test Technician Employee Identification Number. |
1.3.6.1.4.1.351.110.2.1.25 | hwFailures | 1 | 1 | Hardware failure code. |
1.3.6.1.4.1.351.110.2.1.26 | hwHistory | 1 | 1 | RMA Test History - RMA Failure Code. |
1.3.6.1.4.1.351.110.2.1.27 | secLineModuleType | 1 | 1 | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally… |
1.3.6.1.4.1.351.110.2.1.28 | secLineModuleDescription | 1 | 1 | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.29 | secLineModuleSerialNum | 1 | 1 | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.30 | secLineModuleHWRev | 1 | 1 | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.31 | secLineModuleFWRev | 1 | 1 | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revi… |
1.3.6.1.4.1.351.110.2.1.32 | secLineModuleState | 1 | 1 | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
1.3.6.1.4.1.351.110.2.1.33 | configChangeParentObjectIndex | 1 | 1 | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (l… |
1.3.6.1.4.1.351.110.2.1.34 | configChangeGrandParentObjectIndex | 1 | 1 | Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) o… |
1.3.6.1.4.1.351.110.2.1.36 | transId | 1 | 1 | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented b… |