This object is applicable only for traps.
The SNMP operation may not be meaningful.
The value contained in this object is same as
the value of the other objects which are used
for adding/deleting/modifying the row.
The possible values are
0 - No meaning and is not applicable.
1 - add [ Row added ]
2 - delete [ Row deleted ]
3 - mod [ Row modified ]
This value and value contained in configChangeTypeBitMap
represent the configuration change operation.
The default value is 0 and it does not
represent any status.
Parsed from file BASIS-GENERIC-MIB.mib
Module: BASIS-GENERIC-MIB
This object is applicable only for traps.
The SNMP operation may not be meaningful.
The value contained in this object is same as
the value of the other objects which are used
for adding/deleting/modifying the row.
The possible values are
0 - No meaning and is not applicable.
1 - add [ Row added ]
2 - delete [ Row deleted ]
3 - mod [ Row modified ]
This value and value contained in configChangeTypeBitMap
represent the configuration change operation.
The default value is 0 and it does not
represent any status.
This object is applicable only for traps.
The SNMP operation may not be meaningful.
The value contained in this object is same as
the value of the other objects which are used
for adding/deleting/modifying the row.
The possible values are
0 - No meaning and is not applicable.
1 - add [ Row added ]
2 - delete [ Row deleted ]
3 - mod [ Row modified ]
This value and value contained in configChangeTypeBitMap
represent the configuration change operation.
The default value is 0 and it does not
represent any status.
Parsed from file BASIS-GENERIC-MIB.my.txt
Company: None
Module: BASIS-GENERIC-MIB
This object is applicable only for traps.
The SNMP operation may not be meaningful.
The value contained in this object is same as
the value of the other objects which are used
for adding/deleting/modifying the row.
The possible values are
0 - No meaning and is not applicable.
1 - add [ Row added ]
2 - delete [ Row deleted ]
3 - mod [ Row modified ]
This value and value contained in configChangeTypeBitMap
represent the configuration change operation.
The default value is 0 and it does not
represent any status.
configChangeStatus OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other objects which are used for adding/deleting/modifying the row. The possible values are 0 - No meaning and is not applicable. 1 - add [ Row added ] 2 - delete [ Row deleted ] 3 - mod [ Row modified ] This value and value contained in configChangeTypeBitMap represent the configuration change operation. The default value is 0 and it does not represent any status." DEFVAL {0} ::= { cardInformation 19 }
configChangeStatus OBJECT-TYPE SYNTAX INTEGER(0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other objects which are used for adding/deleting/modifying the row. The possible values are 0 - No meaning and is not applicable. 1 - add [ Row added ] 2 - delete [ Row deleted ] 3 - mod [ Row modified ] This value and value contained in configChangeTypeBitMap represent the configuration change operation. The default value is 0 and it does not represent any status." DEFVAL { 0 } ::= { cardInformation 19 }
Vendor: Stratacom
Module: BASIS-GENERIC-MIB
[Automatically extracted from oidview.com]
configChangeStatus OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other objects which are used for adding/deleting/modifying the row. The possible values are 0 - No meaning and is not applicable. 1 - add [ Row added ] 2 - delete [ Row deleted ] 3 - mod [ Row modified ] This value and value contained in configChangeTypeBitMap represent the configuration change operation. The default value is 0 and it does not represent any status." DEFVAL {0} ::= { cardInformation 19 }
configChangeStatus OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "This object is applicable only for traps. The SNMP operation may not be meaningful. The value contained in this object is same as the value of the other objects which are used for adding/deleting/modifying the row. The possible values are 0 - No meaning and is not applicable. 1 - add [ Row added ] 2 - delete [ Row deleted ] 3 - mod [ Row modified ] This value and value contained in configChangeTypeBitMap represent the configuration change operation. The default value is 0 and it does not represent any status." DEFVAL {0} ::= { cardInformation 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.19.0 | configChangeStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.2.1.1 | moduleSlotNumber | 1 | 1 | Slot number this card is present |
| 1.3.6.1.4.1.351.110.2.1.2 | functionModuleType | 1 | 1 | This object holds the type of the card. The card can type is for Processor module as well as service module. |
| 1.3.6.1.4.1.351.110.2.1.3 | functionModuleDescription | 1 | 1 | Describes the card |
| 1.3.6.1.4.1.351.110.2.1.4 | functionModuleSerialNum | 1 | 1 | Serial number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.5 | functionModuleHWRev | 1 | 1 | Hardware revision number for function Module. |
| 1.3.6.1.4.1.351.110.2.1.6 | functionModuleFWRev | 1 | 1 | Firmware revision number of the function Module. |
| 1.3.6.1.4.1.351.110.2.1.7 | functionModuleState | 1 | 1 | This object holds the status of a card in a particular shelf-slot. The possible values are : nocard(1) : card not present. st… |
| 1.3.6.1.4.1.351.110.2.1.8 | functionModuleResetReason | 1 | 1 | Last reason for card to reset. The possible values are : powerUp(1) : power up parityError(2) : parity error watchDog(3) … |
| 1.3.6.1.4.1.351.110.2.1.9 | lineModuleType | 1 | 1 | This object contains the Line Module(back card) type. Physically it is behind the backplane, normally with connectors for physica… |
| 1.3.6.1.4.1.351.110.2.1.10 | lineModuleDescription | 1 | 1 | This object contains description of the line module. |
| 1.3.6.1.4.1.351.110.2.1.11 | lineModuleSerialNum | 1 | 1 | This object contains Serial number of the line module. |
| 1.3.6.1.4.1.351.110.2.1.12 | lineModuleHWRev | 1 | 1 | This object contains Hardware revision for line module. |
| 1.3.6.1.4.1.351.110.2.1.13 | lineModuleFWRev | 1 | 1 | Firmware revision for line module. The current version does not have any firmware, hence will always contains zero length octet st… |
| 1.3.6.1.4.1.351.110.2.1.14 | lineModuleState | 1 | 1 | line module status. |
| 1.3.6.1.4.1.351.110.2.1.15 | moduleTrapAlarmSeverity | 1 | 1 | This object is sent to managers as part of all Trap PDUs, to determine the module alarm severity. An implementation may not suppo… |
| 1.3.6.1.4.1.351.110.2.1.16 | mibVersionNumber | 1 | 1 | MIB version number. Updated when any part of the MIB changes. |
| 1.3.6.1.4.1.351.110.2.1.17 | configChangeTypeBitMap | 1 | 1 | Configuration change Type BitMap bit 0 set = Card Configuration Change bit 1 set = Line Configuration Change bit 2 set = Port Conf… |
| 1.3.6.1.4.1.351.110.2.1.18 | configChangeObjectIndex | 1 | 1 | Configuration change object index, could be line number or port number or channel number depends on the type bitmap, for port res… |
| 1.3.6.1.4.1.351.110.2.1.20 | cardIntegratedAlarmBitMap | 1 | 1 | Bit position represents the different types of alarm for ASC: bit 0: ShelfFunctionModuleState (BNM only) (failed/boot/mismatch/hel… |
| 1.3.6.1.4.1.351.110.2.1.21 | cleiCode | 1 | 1 | Common Language Equipment(CLEI) Code. |
| 1.3.6.1.4.1.351.110.2.1.22 | macAddress | 1 | 1 | Ethernet address (base address) stored in NVRAM, entered by manfacturing. |
| 1.3.6.1.4.1.351.110.2.1.23 | macAddrBlkSize | 1 | 1 | The MAC address block size, entered by manufacturing. |
| 1.3.6.1.4.1.351.110.2.1.24 | finalTestTechnician | 1 | 1 | The Final Test Technician Employee Identification Number. |
| 1.3.6.1.4.1.351.110.2.1.25 | hwFailures | 1 | 1 | Hardware failure code. |
| 1.3.6.1.4.1.351.110.2.1.26 | hwHistory | 1 | 1 | RMA Test History - RMA Failure Code. |
| 1.3.6.1.4.1.351.110.2.1.27 | secLineModuleType | 1 | 1 | This object contains the type of secondary line module(back card). Physically it is the bottom card behind the backplane. Normally… |
| 1.3.6.1.4.1.351.110.2.1.28 | secLineModuleDescription | 1 | 1 | Description of the Secondary line module. This Object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.29 | secLineModuleSerialNum | 1 | 1 | Serial number of the secondary(bottom) line module. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.30 | secLineModuleHWRev | 1 | 1 | Hardware revision for secondary (bottom) line module This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.31 | secLineModuleFWRev | 1 | 1 | Firmware revision for Secondary line module This object is applicable only to selected MGX switches. If there is no Firmware revi… |
| 1.3.6.1.4.1.351.110.2.1.32 | secLineModuleState | 1 | 1 | line module status of secondary (bottom) back card. This object is applicable only to selected MGX switches. |
| 1.3.6.1.4.1.351.110.2.1.33 | configChangeParentObjectIndex | 1 | 1 | Parent object index, could be - line index - port index This object will indicate the index of the immediate higher level object (l… |
| 1.3.6.1.4.1.351.110.2.1.34 | configChangeGrandParentObjectIndex | 1 | 1 | Grand Parent object index, could be - line index This object will indicate the index of the immediate higher level object (line) o… |
| 1.3.6.1.4.1.351.110.2.1.35 | configChangeSMSpecificObject | 1 | 1 | configChangeSMSpecificObject is a generic object which is Service Module Specific. It can be used for different purposes in diffe… |
| 1.3.6.1.4.1.351.110.2.1.36 | transId | 1 | 1 | Per card transaction ID. This object is used to keep track of configuration change on the card. The transId will be incremented b… |