Current value of the threshold counter. This
object is set to zero at the begining of each
duration window.
Notes: 1.) If the type of threshold is
station(6) and the station is not
on the same ring as the NMM, this
object will remain at zero, which
will prevent the threshold condition
from ever being met.
2.) This object is not used for
evaluating the threshold condition
and will remain at zero if the type
of threshold is port(4).
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrThreshEntActualValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current value of the threshold counter. This object is set to zero at the begining of each duration window. Notes: 1.) If the type of threshold is station(6) and the station is not on the same ring as the NMM, this object will remain at zero, which will prevent the threshold condition from ever being met. 2.) This object is not used for evaluating the threshold condition and will remain at zero if the type of threshold is port(4)." ::= { s3TrThresholdEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.8.1.1.1 | s3TrThreshEntIndex | 0 | 0 | The index into the threshold table. |
1.3.6.1.4.1.45.1.3.3.8.1.1.2 | s3TrThreshEntStatus | 0 | 0 | The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created… |
1.3.6.1.4.1.45.1.3.3.8.1.1.3 | s3TrThreshEntObject | 0 | 0 | Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (erro… |
1.3.6.1.4.1.45.1.3.3.8.1.1.4 | s3TrThreshEntSlot | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.5 | s3TrThreshEntPort | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.6 | s3TrThreshEntType | 0 | 0 | Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Appl… |
1.3.6.1.4.1.45.1.3.3.8.1.1.7 | s3TrThreshEntCondition | 0 | 0 | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value o… |
1.3.6.1.4.1.45.1.3.3.8.1.1.8 | s3TrThreshEntSetValue | 0 | 0 | Threshold setting value. When setting this object the value MUST be greater than zero for the following types of thresholds: lineEr… |
1.3.6.1.4.1.45.1.3.3.8.1.1.10 | s3TrThreshEntAction | 0 | 0 | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are … |
1.3.6.1.4.1.45.1.3.3.8.1.1.11 | s3TrThreshExceedCount | 0 | 0 | Counter for how many times the setted threshold has reached its setting value. |
1.3.6.1.4.1.45.1.3.3.8.1.1.12 | s3TrThreshEntDuration | 0 | 0 | Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window … |
1.3.6.1.4.1.45.1.3.3.8.1.1.13 | s3TrThreshMacAddr | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value station(6). If the object s3TrThreshEntObject ha… |