The status of the threshold.
The possible values for a write are:
addActive(1)...If the entry does not exist, the
entry is created as long as
the other necessary objects
are in the SNMP SET request.
If the entry does exist
and is inactive, it is
activated.
delDead(2).....Causes the entry to be deleted
from the table. It could take
5 seconds after delDead(2) is
written to actually delete the
entry due to task scheduling.
The possible values for a read are:
addActive(1)...This threshold entry is active.
delDead(2).....This threshold entry is inactive
and will be deleted in 5
seconds or less.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrThreshEntStatus OBJECT-TYPE SYNTAX INTEGER { addActive(1), delDead(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created as long as the other necessary objects are in the SNMP SET request. If the entry does exist and is inactive, it is activated. delDead(2).....Causes the entry to be deleted from the table. It could take 5 seconds after delDead(2) is written to actually delete the entry due to task scheduling. The possible values for a read are: addActive(1)...This threshold entry is active. delDead(2).....This threshold entry is inactive and will be deleted in 5 seconds or less." ::= { s3TrThresholdEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.8.1.1.1 | s3TrThreshEntIndex | 0 | 0 | The index into the threshold table. |
1.3.6.1.4.1.45.1.3.3.8.1.1.3 | s3TrThreshEntObject | 0 | 0 | Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (erro… |
1.3.6.1.4.1.45.1.3.3.8.1.1.4 | s3TrThreshEntSlot | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.5 | s3TrThreshEntPort | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.6 | s3TrThreshEntType | 0 | 0 | Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Appl… |
1.3.6.1.4.1.45.1.3.3.8.1.1.7 | s3TrThreshEntCondition | 0 | 0 | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value o… |
1.3.6.1.4.1.45.1.3.3.8.1.1.8 | s3TrThreshEntSetValue | 0 | 0 | Threshold setting value. When setting this object the value MUST be greater than zero for the following types of thresholds: lineEr… |
1.3.6.1.4.1.45.1.3.3.8.1.1.9 | s3TrThreshEntActualValue | 0 | 0 | Current value of the threshold counter. This object is set to zero at the begining of each duration window. Notes: 1.) If the ty… |
1.3.6.1.4.1.45.1.3.3.8.1.1.10 | s3TrThreshEntAction | 0 | 0 | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are … |
1.3.6.1.4.1.45.1.3.3.8.1.1.11 | s3TrThreshExceedCount | 0 | 0 | Counter for how many times the setted threshold has reached its setting value. |
1.3.6.1.4.1.45.1.3.3.8.1.1.12 | s3TrThreshEntDuration | 0 | 0 | Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window … |
1.3.6.1.4.1.45.1.3.3.8.1.1.13 | s3TrThreshMacAddr | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value station(6). If the object s3TrThreshEntObject ha… |