Determines which type of threshold applies to
this entry. The possible values that can be
read and written are listed below.
Applicable ONLY to Ring and Station Thresholds
==============================================
lineError(2)............Count of line errors
burstError(3)...........Count of burst errors
arcFciError(4)..........Count of ARI FCI errors
recvCongestionErr(5)....Count of receive
congestion errors
frameCopyError(6).......Count of frame copy
errors
tokenError(7)...........Count of token errors
lostFrame(8)............Count of lost frame
errors
beaconing(9)............Count of beacon frames
Applicable ONLY to Port Thresholds
==============================================
portPhantomStatus(15)...Phantom signal has
changed from off
to on or visa-versa
Applicable ONLY to Ring Thresholds
==============================================
goodOctets(10)..........Count of good bytes
goodFrames(11)..........Count of good frames
utilization(12).........Total byte count of
all good and bad
frames seen per
second, divided by
the ring speed in
bytes per second
Applicable ONLY to Station Thresholds
==============================================
stationInserts(13)......Station inserted into
NMM's ring
stationDeinserts(14)....Station deinserted from
NMM's ring
Note: 1.) The value other(1) can only be
read and it indicates the entry
has an invalid or unknown threshold
type.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrThreshEntType OBJECT-TYPE SYNTAX INTEGER { other(1), lineError(2), burstError(3), arcFciError(4), recvCongestionErr(5), frameCopyError(6), tokenError(7), lostFrame(8), beaconing(9), goodOctets(10), goodFrames(11), utilization(12), stationInserts(13), stationDeinserts(14), portPhantomStatus(15) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Applicable ONLY to Ring and Station Thresholds ============================================== lineError(2)............Count of line errors burstError(3)...........Count of burst errors arcFciError(4)..........Count of ARI FCI errors recvCongestionErr(5)....Count of receive congestion errors frameCopyError(6).......Count of frame copy errors tokenError(7)...........Count of token errors lostFrame(8)............Count of lost frame errors beaconing(9)............Count of beacon frames Applicable ONLY to Port Thresholds ============================================== portPhantomStatus(15)...Phantom signal has changed from off to on or visa-versa Applicable ONLY to Ring Thresholds ============================================== goodOctets(10)..........Count of good bytes goodFrames(11)..........Count of good frames utilization(12).........Total byte count of all good and bad frames seen per second, divided by the ring speed in bytes per second Applicable ONLY to Station Thresholds ============================================== stationInserts(13)......Station inserted into NMM's ring stationDeinserts(14)....Station deinserted from NMM's ring Note: 1.) The value other(1) can only be read and it indicates the entry has an invalid or unknown threshold type." ::= { s3TrThresholdEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.3.3.8.1.1.1 | s3TrThreshEntIndex | 0 | 0 | The index into the threshold table. |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.2 | s3TrThreshEntStatus | 0 | 0 | The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.3 | s3TrThreshEntObject | 0 | 0 | Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (erro… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.4 | s3TrThreshEntSlot | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.5 | s3TrThreshEntPort | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.7 | s3TrThreshEntCondition | 0 | 0 | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value o… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.8 | s3TrThreshEntSetValue | 0 | 0 | Threshold setting value. When setting this object the value MUST be greater than zero for the following types of thresholds: lineEr… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.9 | s3TrThreshEntActualValue | 0 | 0 | Current value of the threshold counter. This object is set to zero at the begining of each duration window. Notes: 1.) If the ty… |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.10 | s3TrThreshEntAction | 0 | 0 | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are … |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.11 | s3TrThreshExceedCount | 0 | 0 | Counter for how many times the setted threshold has reached its setting value. |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.12 | s3TrThreshEntDuration | 0 | 0 | Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window … |
| 1.3.6.1.4.1.45.1.3.3.8.1.1.13 | s3TrThreshMacAddr | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value station(6). If the object s3TrThreshEntObject ha… |