Length of window over which threshold counts
are summed, specified in intervals of 500
TimeTicks (i.e., 5 seconds). This window is
broken down into 5 second sampling periods
for purposes of checking the threshold
conditions, and determining when the actions
specified need to take place when the condition
occurs.
If this object is written with a value that is
not evenly divisible by 500, the agent will
internally round the value up to the closest
integral of 500 before it is used in threshold
calculations (i.e., a value of 12 can be
written, but will be interpreted as 15).
Notes: 1.) A value of zero indicates an
infinite duration window if the
value of s3TrThreshEntCondition
is crossValue(2) or overValue(3).
2.) If the value of
s3TrThreshEntCondition is
overRate(4), a value of zero is
equivalent to a duration window
of 5 seconds.
3.) If the value of s3TrThreshEntType
is portPhantomStatus(15), the value
of this object is ignore and assumed
to be infinite.
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: TimeTicks
Automatically extracted from www.mibdepot.com
s3TrThreshEntDuration OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window is broken down into 5 second sampling periods for purposes of checking the threshold conditions, and determining when the actions specified need to take place when the condition occurs. If this object is written with a value that is not evenly divisible by 500, the agent will internally round the value up to the closest integral of 500 before it is used in threshold calculations (i.e., a value of 12 can be written, but will be interpreted as 15). Notes: 1.) A value of zero indicates an infinite duration window if the value of s3TrThreshEntCondition is crossValue(2) or overValue(3). 2.) If the value of s3TrThreshEntCondition is overRate(4), a value of zero is equivalent to a duration window of 5 seconds. 3.) If the value of s3TrThreshEntType is portPhantomStatus(15), the value of this object is ignore and assumed to be infinite." ::= { s3TrThresholdEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.8.1.1.1 | s3TrThreshEntIndex | 0 | 0 | The index into the threshold table. |
1.3.6.1.4.1.45.1.3.3.8.1.1.2 | s3TrThreshEntStatus | 0 | 0 | The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created… |
1.3.6.1.4.1.45.1.3.3.8.1.1.3 | s3TrThreshEntObject | 0 | 0 | Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (erro… |
1.3.6.1.4.1.45.1.3.3.8.1.1.4 | s3TrThreshEntSlot | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.5 | s3TrThreshEntPort | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.6 | s3TrThreshEntType | 0 | 0 | Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Appl… |
1.3.6.1.4.1.45.1.3.3.8.1.1.7 | s3TrThreshEntCondition | 0 | 0 | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value o… |
1.3.6.1.4.1.45.1.3.3.8.1.1.8 | s3TrThreshEntSetValue | 0 | 0 | Threshold setting value. When setting this object the value MUST be greater than zero for the following types of thresholds: lineEr… |
1.3.6.1.4.1.45.1.3.3.8.1.1.9 | s3TrThreshEntActualValue | 0 | 0 | Current value of the threshold counter. This object is set to zero at the begining of each duration window. Notes: 1.) If the ty… |
1.3.6.1.4.1.45.1.3.3.8.1.1.10 | s3TrThreshEntAction | 0 | 0 | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are … |
1.3.6.1.4.1.45.1.3.3.8.1.1.11 | s3TrThreshExceedCount | 0 | 0 | Counter for how many times the setted threshold has reached its setting value. |
1.3.6.1.4.1.45.1.3.3.8.1.1.13 | s3TrThreshMacAddr | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value station(6). If the object s3TrThreshEntObject ha… |