Specifies the part of the concentrator the
threshold applies. The possible values are:
other(1)..........Unknown threshold (error)
res2(2)...........No longer used
res3(3)...........No longer used
port(4)...........The threshold applies to a
specific port in the
concentrator identified by
s3TrThreshEntSlot and
s3TrThreshEntPort
ring(5)...........The threshold applies to the
ring to which the NMM is
connected
station(6)........The threshold applies to a
specific station identified
by the MAC address contained
in s3TrThreshMacAddr
All values are read-write with the exception of
other(1), which is read-only.
See the description of the object s3TrThreshEntType
for the explanation of which thresholds are
applicable to port(4), ring(5), and station(6).
Parsed from file s3tok430.mib.txt
Company: nortel
Module: SYNOPTICS-TOKENRING-MIB
Vendor: Nortel Networks
Module: SYNOPTICS-TOKENRING-MIB (s3tok430.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
s3TrThreshEntObject OBJECT-TYPE SYNTAX INTEGER { other(1), res2(2), res3(3), port(4), ring(5), station(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the part of the concentrator the threshold applies. The possible values are: other(1)..........Unknown threshold (error) res2(2)...........No longer used res3(3)...........No longer used port(4)...........The threshold applies to a specific port in the concentrator identified by s3TrThreshEntSlot and s3TrThreshEntPort ring(5)...........The threshold applies to the ring to which the NMM is connected station(6)........The threshold applies to a specific station identified by the MAC address contained in s3TrThreshMacAddr All values are read-write with the exception of other(1), which is read-only. See the description of the object s3TrThreshEntType for the explanation of which thresholds are applicable to port(4), ring(5), and station(6)." ::= { s3TrThresholdEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.1.3.3.8.1.1.1 | s3TrThreshEntIndex | 0 | 0 | The index into the threshold table. |
1.3.6.1.4.1.45.1.3.3.8.1.1.2 | s3TrThreshEntStatus | 0 | 0 | The status of the threshold. The possible values for a write are: addActive(1)...If the entry does not exist, the entry is created… |
1.3.6.1.4.1.45.1.3.3.8.1.1.4 | s3TrThreshEntSlot | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.5 | s3TrThreshEntPort | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value port(4). If the object s3TrThreshEntObject has t… |
1.3.6.1.4.1.45.1.3.3.8.1.1.6 | s3TrThreshEntType | 0 | 0 | Determines which type of threshold applies to this entry. The possible values that can be read and written are listed below. Appl… |
1.3.6.1.4.1.45.1.3.3.8.1.1.7 | s3TrThreshEntCondition | 0 | 0 | Conditions that set off the threshold. The possible values are: other(1)........None of the following crossValue(2)...The value o… |
1.3.6.1.4.1.45.1.3.3.8.1.1.8 | s3TrThreshEntSetValue | 0 | 0 | Threshold setting value. When setting this object the value MUST be greater than zero for the following types of thresholds: lineEr… |
1.3.6.1.4.1.45.1.3.3.8.1.1.9 | s3TrThreshEntActualValue | 0 | 0 | Current value of the threshold counter. This object is set to zero at the begining of each duration window. Notes: 1.) If the ty… |
1.3.6.1.4.1.45.1.3.3.8.1.1.10 | s3TrThreshEntAction | 0 | 0 | Determines what action is to take place if the threshold condition occurs. The possible values that can be read and written are … |
1.3.6.1.4.1.45.1.3.3.8.1.1.11 | s3TrThreshExceedCount | 0 | 0 | Counter for how many times the setted threshold has reached its setting value. |
1.3.6.1.4.1.45.1.3.3.8.1.1.12 | s3TrThreshEntDuration | 0 | 0 | Length of window over which threshold counts are summed, specified in intervals of 500 TimeTicks (i.e., 5 seconds). This window … |
1.3.6.1.4.1.45.1.3.3.8.1.1.13 | s3TrThreshMacAddr | 0 | 0 | This object is ONLY meaningful when the object s3TrThreshEntObject has the value station(6). If the object s3TrThreshEntObject ha… |