This attribute specifies the amount of added output delay used to
compensate for cross network delay variations. It applies to voice,
modem and fax traffic. It is required to add output delay so that the
statistical variation in the transit time of cells crossing the network
does not cause gaps in speech. Backbone networks where high
priority traffic consumes a high percentage of trunk bandwidth will
require a higher insertedOutputDelay to compensate for the greater
cell delay variation (CDV).
This attribute is ignored if this call runs on a 1pDS1V or 1pE1V
card.
Parsed from file nortelPP-vncsCallServerV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VncsCallServerMIB
This attribute specifies the amount of added output delay used to
compensate for cross network delay variations. It applies to voice,
modem and fax traffic. It is required to add output delay so that the
statistical variation in the transit time of cells crossing the network
does not cause gaps in speech. Backbone networks where high
priority traffic consumes a high percentage of trunk bandwidth will
require a higher insertedOutputDelay to compensate for the greater
cell delay variation (CDV).
This attribute is ignored if this call runs on a 1pDS1V or 1pE1V
card.
Parsed from file Nortel-Magellan-Passport-VncsCallServerMIB.mib
Module: Nortel-Magellan-Passport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VncsCallServerMIB
[Automatically extracted from oidview.com]
vncsVpInsertedOutputDelay OBJECT-TYPE SYNTAX INTEGER { n5(5), n15(15), n22(22), n30(30), n35(35), n40(40), n45(45), n50(50), n75(75), n100(100), n125(125), n150(150) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It is required to add output delay so that the statistical variation in the transit time of cells crossing the network does not cause gaps in speech. Backbone networks where high priority traffic consumes a high percentage of trunk bandwidth will require a higher insertedOutputDelay to compensate for the greater cell delay variation (CDV). This attribute is ignored if this call runs on a 1pDS1V or 1pE1V card." DEFVAL { n22 } ::= { vncsVpFrOpsEntry 17 }
vncsVpInsertedOutputDelay OBJECT-TYPE SYNTAX INTEGER { n5(5), n15(15), n22(22), n30(30), n35(35), n40(40), n45(45), n50(50), n75(75), n100(100), n125(125), n150(150) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to voice, modem and fax traffic. It is required to add output delay so that the statistical variation in the transit time of cells crossing the network does not cause gaps in speech. Backbone networks where high priority traffic consumes a high percentage of trunk bandwidth will require a higher insertedOutputDelay to compensate for the greater cell delay variation (CDV). This attribute is ignored if this call runs on a 1pDS1V or 1pE1V card." DEFVAL { n22 } ::= { vncsVpFrOpsEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.1 | vncsVpMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum encoding bit rate (minimum compression rate) that will be used for voice data. This attribu… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.2 | vncsVpMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum encoding bit rate (maximum compression rate) that will be used for voice data. Migration in… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.3 | vncsVpMaxModemBitRate | 0 | 0 | This attribute was migrated to the max element of the g711G726 row of the modemFaxRates attribute. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.4 | vncsVpMinModemBitRate | 0 | 0 | This attribute has been obsoleted. Migration information is as follows: If minModemBitRate is 64 kbit/s, it means that the user … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.5 | vncsVpAudioGain | 0 | 0 | This attribute has been migrated to VRoute Interface egressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.6 | vncsVpSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.7 | vncsVpEchoCancellation | 0 | 0 | This attribute has been migrated to VRoute Interface echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 | vncsVpSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.9 | vncsVpDataCallsAccepted | 0 | 0 | This attribute specifies whether data calls are allowed if this profile is used. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.15 | vncsVpFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies the fax idle suppression parameter used during negotiation with the remote end across the subnet. It ap… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.18 | vncsVpVoiceTrafficOptimization | 0 | 0 | This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.19 | vncsVpDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20 | vncsVpV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unles… |