This attribute specifies the DTMF regeneration parameter used
during negotiation with the remote end across the subnet.
If dtmfRegeneration is on, it is desired that DTMF tones received
from the link are first converted to digits before being sent to the
subnet. When a digit is received from the subnet, its respective
DTMF tone is desired to be generated before being sent to the link.
If dtmfRegeneration is off, it is desired that DTMF tones are
transported transparently as audio.
DTMF regeneration is not supported on 1pDS1V, 1pE1V, and
J2MV cards. On these cards, the value of dtmfRegeneration is
ignored.
The negotiated DTMF regeneration is available in Vsr Svs Framer
negotiatedDtmfRegeneration.
Parsed from file nortelPP-vncsCallServerV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VncsCallServerMIB
This attribute specifies the DTMF regeneration parameter used
during negotiation with the remote end across the subnet.
If dtmfRegeneration is on, it is desired that DTMF tones received
from the link are first converted to digits before being sent to the
subnet. When a digit is received from the subnet, its respective
DTMF tone is desired to be generated before being sent to the link.
If dtmfRegeneration is off, it is desired that DTMF tones are
transported transparently as audio.
DTMF regeneration is not supported on 1pDS1V, 1pE1V, and
J2MV cards. On these cards, the value of dtmfRegeneration is
ignored.
The negotiated DTMF regeneration is available in Vsr Svs Framer
negotiatedDtmfRegeneration.
Parsed from file Nortel-Magellan-Passport-VncsCallServerMIB.mib
Module: Nortel-Magellan-Passport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VncsCallServerMIB
[Automatically extracted from oidview.com]
vncsVpDtmfRegeneration OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link. If dtmfRegeneration is off, it is desired that DTMF tones are transported transparently as audio. DTMF regeneration is not supported on 1pDS1V, 1pE1V, and J2MV cards. On these cards, the value of dtmfRegeneration is ignored. The negotiated DTMF regeneration is available in Vsr Svs Framer negotiatedDtmfRegeneration." DEFVAL { off } ::= { vncsVpFrOpsEntry 19 }
vncsVpDtmfRegeneration OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfRegeneration is on, it is desired that DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is desired to be generated before being sent to the link. If dtmfRegeneration is off, it is desired that DTMF tones are transported transparently as audio. DTMF regeneration is not supported on 1pDS1V, 1pE1V, and J2MV cards. On these cards, the value of dtmfRegeneration is ignored. The negotiated DTMF regeneration is available in Vsr Svs Framer negotiatedDtmfRegeneration." DEFVAL { off } ::= { vncsVpFrOpsEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.1 | vncsVpMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum encoding bit rate (minimum compression rate) that will be used for voice data. This attribu… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.2 | vncsVpMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum encoding bit rate (maximum compression rate) that will be used for voice data. Migration in… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.3 | vncsVpMaxModemBitRate | 0 | 0 | This attribute was migrated to the max element of the g711G726 row of the modemFaxRates attribute. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.4 | vncsVpMinModemBitRate | 0 | 0 | This attribute has been obsoleted. Migration information is as follows: If minModemBitRate is 64 kbit/s, it means that the user … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.5 | vncsVpAudioGain | 0 | 0 | This attribute has been migrated to VRoute Interface egressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.6 | vncsVpSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.7 | vncsVpEchoCancellation | 0 | 0 | This attribute has been migrated to VRoute Interface echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 | vncsVpSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.9 | vncsVpDataCallsAccepted | 0 | 0 | This attribute specifies whether data calls are allowed if this profile is used. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.15 | vncsVpFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies the fax idle suppression parameter used during negotiation with the remote end across the subnet. It ap… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.17 | vncsVpInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.18 | vncsVpVoiceTrafficOptimization | 0 | 0 | This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20 | vncsVpV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unles… |