This attribute specifies when silence suppression is desired during
voice traffic on an audio call.
If silenceSuppression is off, silence suppression is never desired.
If silenceSuppression is on, silence suppression is always desired.
If silenceSuppression is congested, silence suppression is desired
only when the network is congested.
If silenceSuppression is slow, silence suppression is desired only
after 20 seconds without audio.
If silenceSuppression is slowAndCongested, both the slow and
congested options are desired.
The negotiated silence suppression is available in Vsr Svs Framer
negotiatedSilenceSuppression.
Parsed from file nortelPP-vncsCallServerV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VncsCallServerMIB
This attribute specifies when silence suppression is desired during
voice traffic on an audio call.
If silenceSuppression is off, silence suppression is never desired.
If silenceSuppression is on, silence suppression is always desired.
If silenceSuppression is congested, silence suppression is desired
only when the network is congested.
If silenceSuppression is slow, silence suppression is desired only
after 20 seconds without audio.
If silenceSuppression is slowAndCongested, both the slow and
congested options are desired.
The negotiated silence suppression is available in Vsr Svs Framer
negotiatedSilenceSuppression.
Parsed from file Nortel-Magellan-Passport-VncsCallServerMIB.mib
Module: Nortel-Magellan-Passport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VncsCallServerMIB
[Automatically extracted from oidview.com]
vncsVpSilenceSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), congested(2), slow(3), slowAndCongested(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off, silence suppression is never desired. If silenceSuppression is on, silence suppression is always desired. If silenceSuppression is congested, silence suppression is desired only when the network is congested. If silenceSuppression is slow, silence suppression is desired only after 20 seconds without audio. If silenceSuppression is slowAndCongested, both the slow and congested options are desired. The negotiated silence suppression is available in Vsr Svs Framer negotiatedSilenceSuppression." DEFVAL { on } ::= { vncsVpFrOpsEntry 6 }
vncsVpSilenceSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), congested(2), slow(3), slowAndCongested(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off, silence suppression is never desired. If silenceSuppression is on, silence suppression is always desired. If silenceSuppression is congested, silence suppression is desired only when the network is congested. If silenceSuppression is slow, silence suppression is desired only after 20 seconds without audio. If silenceSuppression is slowAndCongested, both the slow and congested options are desired. The negotiated silence suppression is available in Vsr Svs Framer negotiatedSilenceSuppression." DEFVAL { on } ::= { vncsVpFrOpsEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.1 | vncsVpMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum encoding bit rate (minimum compression rate) that will be used for voice data. This attribu… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.2 | vncsVpMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum encoding bit rate (maximum compression rate) that will be used for voice data. Migration in… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.3 | vncsVpMaxModemBitRate | 0 | 0 | This attribute was migrated to the max element of the g711G726 row of the modemFaxRates attribute. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.4 | vncsVpMinModemBitRate | 0 | 0 | This attribute has been obsoleted. Migration information is as follows: If minModemBitRate is 64 kbit/s, it means that the user … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.5 | vncsVpAudioGain | 0 | 0 | This attribute has been migrated to VRoute Interface egressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.7 | vncsVpEchoCancellation | 0 | 0 | This attribute has been migrated to VRoute Interface echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 | vncsVpSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.9 | vncsVpDataCallsAccepted | 0 | 0 | This attribute specifies whether data calls are allowed if this profile is used. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.15 | vncsVpFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies the fax idle suppression parameter used during negotiation with the remote end across the subnet. It ap… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.17 | vncsVpInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.18 | vncsVpVoiceTrafficOptimization | 0 | 0 | This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.19 | vncsVpDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20 | vncsVpV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unles… |