This attribute is not supported now.
This attribute specifies how to optimize voice traffic. Setting
voiceTrafficOptimization to bandwidth specifies that voice traffic
should be optimized to preserve bandwidth. Setting
voiceTrafficOptimization to delay specifies that voice traffic should
be optimized to minimize delay.
Parsed from file nortelPP-vncsCallServerV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VncsCallServerMIB
This attribute is not supported now.
This attribute specifies how to optimize voice traffic. Setting
voiceTrafficOptimization to bandwidth specifies that voice traffic
should be optimized to preserve bandwidth. Setting
voiceTrafficOptimization to delay specifies that voice traffic should
be optimized to minimize delay.
Parsed from file Nortel-Magellan-Passport-VncsCallServerMIB.mib
Module: Nortel-Magellan-Passport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VncsCallServerMIB
[Automatically extracted from oidview.com]
vncsVpVoiceTrafficOptimization OBJECT-TYPE SYNTAX INTEGER { bandwidth(0), delay(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to bandwidth specifies that voice traffic should be optimized to preserve bandwidth. Setting voiceTrafficOptimization to delay specifies that voice traffic should be optimized to minimize delay." DEFVAL { bandwidth } ::= { vncsVpFrOpsEntry 18 }
vncsVpVoiceTrafficOptimization OBJECT-TYPE SYNTAX INTEGER { bandwidth(0), delay(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to bandwidth specifies that voice traffic should be optimized to preserve bandwidth. Setting voiceTrafficOptimization to delay specifies that voice traffic should be optimized to minimize delay." DEFVAL { bandwidth } ::= { vncsVpFrOpsEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.44.3.3.1.1 | vncsVpMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum encoding bit rate (minimum compression rate) that will be used for voice data. This attribu… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.2 | vncsVpMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum encoding bit rate (maximum compression rate) that will be used for voice data. Migration in… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.3 | vncsVpMaxModemBitRate | 0 | 0 | This attribute was migrated to the max element of the g711G726 row of the modemFaxRates attribute. DESCRIPTION |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.4 | vncsVpMinModemBitRate | 0 | 0 | This attribute has been obsoleted. Migration information is as follows: If minModemBitRate is 64 kbit/s, it means that the user … |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.5 | vncsVpAudioGain | 0 | 0 | This attribute has been migrated to VRoute Interface egressAudioGain. |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.6 | vncsVpSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.7 | vncsVpEchoCancellation | 0 | 0 | This attribute has been migrated to VRoute Interface echoCancellation. |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.8 | vncsVpSilenceSuppressionFactor | 0 | 0 | This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silen… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.9 | vncsVpDataCallsAccepted | 0 | 0 | This attribute specifies whether data calls are allowed if this profile is used. |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.15 | vncsVpFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies the fax idle suppression parameter used during negotiation with the remote end across the subnet. It ap… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.17 | vncsVpInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.19 | vncsVpDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
1.3.6.1.4.1.562.2.4.1.44.3.3.1.20 | vncsVpV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unles… |