This attribute specifies the expected savings (percent reduction) in
required bandwidth if silence suppression is used. If silence
suppression is used, the bandwidth required for the connection will
be lower than if silence suppression is not used. However, the
routing system will not be aware of the unused bandwidth unless
that bandwidth is specified by this attribute.
If the value specified for the expected savings is too low, then some
bandwidth made available by the use of silence suppression will be
wasted. If the value specified for the expected savings is too high,
then some connections may fail to set up because the routing system
will over-calculate the amount of bandwidth available.
The effectiveness of silence suppression can be influenced by
language related speech patterns.
Parsed from file nortelPP-vncsCallServerV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VncsCallServerMIB
This attribute specifies the expected savings (percent reduction) in
required bandwidth if silence suppression is used. If silence
suppression is used, the bandwidth required for the connection will
be lower than if silence suppression is not used. However, the
routing system will not be aware of the unused bandwidth unless
that bandwidth is specified by this attribute.
If the value specified for the expected savings is too low, then some
bandwidth made available by the use of silence suppression will be
wasted. If the value specified for the expected savings is too high,
then some connections may fail to set up because the routing system
will over-calculate the amount of bandwidth available.
The effectiveness of silence suppression can be influenced by
language related speech patterns.
Parsed from file Nortel-Magellan-Passport-VncsCallServerMIB.mib
Module: Nortel-Magellan-Passport-VncsCallServerMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VncsCallServerMIB
[Automatically extracted from oidview.com]
vncsVpSilenceSuppressionFactor OBJECT-TYPE SYNTAX Unsigned32 (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the bandwidth required for the connection will be lower than if silence suppression is not used. However, the routing system will not be aware of the unused bandwidth unless that bandwidth is specified by this attribute. If the value specified for the expected savings is too low, then some bandwidth made available by the use of silence suppression will be wasted. If the value specified for the expected savings is too high, then some connections may fail to set up because the routing system will over-calculate the amount of bandwidth available. The effectiveness of silence suppression can be influenced by language related speech patterns." DEFVAL { 40 } ::= { vncsVpFrOpsEntry 8 }
vncsVpSilenceSuppressionFactor OBJECT-TYPE SYNTAX Unsigned32 (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the expected savings (percent reduction) in required bandwidth if silence suppression is used. If silence suppression is used, the bandwidth required for the connection will be lower than if silence suppression is not used. However, the routing system will not be aware of the unused bandwidth unless that bandwidth is specified by this attribute. If the value specified for the expected savings is too low, then some bandwidth made available by the use of silence suppression will be wasted. If the value specified for the expected savings is too high, then some connections may fail to set up because the routing system will over-calculate the amount of bandwidth available. The effectiveness of silence suppression can be influenced by language related speech patterns." DEFVAL { 40 } ::= { vncsVpFrOpsEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.1 | vncsVpMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum encoding bit rate (minimum compression rate) that will be used for voice data. This attribu… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.2 | vncsVpMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum encoding bit rate (maximum compression rate) that will be used for voice data. Migration in… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.3 | vncsVpMaxModemBitRate | 0 | 0 | This attribute was migrated to the max element of the g711G726 row of the modemFaxRates attribute. DESCRIPTION |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.4 | vncsVpMinModemBitRate | 0 | 0 | This attribute has been obsoleted. Migration information is as follows: If minModemBitRate is 64 kbit/s, it means that the user … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.5 | vncsVpAudioGain | 0 | 0 | This attribute has been migrated to VRoute Interface egressAudioGain. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.6 | vncsVpSilenceSuppression | 0 | 0 | This attribute specifies when silence suppression is desired during voice traffic on an audio call. If silenceSuppression is off… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.7 | vncsVpEchoCancellation | 0 | 0 | This attribute has been migrated to VRoute Interface echoCancellation. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.9 | vncsVpDataCallsAccepted | 0 | 0 | This attribute specifies whether data calls are allowed if this profile is used. |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.15 | vncsVpFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies the fax idle suppression parameter used during negotiation with the remote end across the subnet. It ap… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.17 | vncsVpInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.18 | vncsVpVoiceTrafficOptimization | 0 | 0 | This attribute is not supported now. This attribute specifies how to optimize voice traffic. Setting voiceTrafficOptimization to … |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.19 | vncsVpDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.2.4.1.44.3.3.1.20 | vncsVpV17EncodedAsG711G726 | 0 | 0 | This attribute specifies how services using this VoiceProfile negotiate with V.17 fax machines. This attribute is not used unles… |