This MIB module defines managed objects that facilitate to
monitor performance of any physical entity, which are listed in
the ENTITY-MIB (RFC 4133) entPhysicalTable.
The performance monitoring includes utilization, input/output
packet/byte rates, etc. This monitoring is through the
measurement periods of current, 1-minute, 5-minutes,
15-minutes.
The performance data calculation method would vary for each
entity for a specific interval, hence users of this MIB should
obtain the information using the object cepStatsAlgorithm for a
specific interval.
The performance statistics can be accumulated for the 1-minute,
5-minutes and 15-minutes (recommended) intervals. At any one
time, an agent maintains one current (incomplete) interval for
each interval type and up to 96 completed interval number. Fewer
than 96 interval number of data will be available if the agent
has been restarted within the last 24 hours for 15 minutes
interval, 8 hours for 5 minutes interval, and 1.36 hours for 1
minute interval.
There is no requirement for an agent to ensure fixed
relationship between the start of a one/five/fifteen minute
intervals and wall clock, however some agents may align the
fifteen minutes interval with quarter hours.
The following terminologies apply within the scope of this MIB.
o entity - Any physical entity which can support performance
monitoring as specified in this MIB
o Utilization - The ratio of current usage to the maximum
capacity the entity can handle
o Input - Communication channel where packets arrive on the
entity
o Output - Communication channel where packets leave the entity
Acronyms
========
SMA - Simple Moving Average
Parsed from file CISCO-ENTITY-PERFORMANCE-MIB.mib
Module: CISCO-ENTITY-PERFORMANCE-MIB
This MIB module defines managed objects that facilitate to
monitor performance of any physical entity, which are listed in
the ENTITY-MIB (RFC 4133) entPhysicalTable.
The performance monitoring includes utilization, input/output
packet/byte rates, etc. This monitoring is through the
measurement periods of current, 1-minute, 5-minutes,
15-minutes.
The performance data calculation method would vary for each
entity for a specific interval, hence users of this MIB should
obtain the information using the object cepStatsAlgorithm for a
specific interval.
The performance statistics can be accumulated for the 1-minute,
5-minutes and 15-minutes (recommended) intervals. At any one
time, an agent maintains one current (incomplete) interval for
each interval type and up to 96 completed interval number. Fewer
than 96 interval number of data will be available if the agent
has been restarted within the last 24 hours for 15 minutes
interval, 8 hours for 5 minutes interval, and 1.36 hours for 1
minute interval.
There is no requirement for an agent to ensure fixed
relationship between the start of a one/five/fifteen minute
intervals and wall clock, however some agents may align the
fifteen minutes interval with quarter hours.
The following terminologies apply within the scope of this MIB.
o entity - Any physical entity which can support performance
monitoring as specified in this MIB
o Utilization - The ratio of current usage to the maximum
capacity the entity can handle
o Input - Communication channel where packets arrive on the
entity
o Output - Communication channel where packets leave the entity
Acronyms
========
SMA - Simple Moving Average
Parsed from file CISCO-ENTITY-PERFORMANCE-MIB.my.txt
Company: None
Module: CISCO-ENTITY-PERFORMANCE-MIB
This MIB module defines managed objects that facilitate to
monitor performance of any physical entity, which are listed in
the ENTITY-MIB (RFC 4133) entPhysicalTable.
The performance monitoring includes utilization, input/output
packet/byte rates, etc. This monitoring is through the
measurement periods of current, 1-minute, 5-minutes,
15-minutes.
The performance data calculation method would vary for each
entity for a specific interval, hence users of this MIB should
obtain the information using the object cepStatsAlgorithm for a
specific interval.
The performance statistics can be accumulated for the 1-minute,
5-minutes and 15-minutes (recommended) intervals. At any one
time, an agent maintains one current (incomplete) interval for
each interval type and up to 96 completed interval number. Fewer
than 96 interval number of data will be available if the agent
has been restarted within the last 24 hours for 15 minutes
interval, 8 hours for 5 minutes interval, and 1.36 hours for 1
minute interval.
There is no requirement for an agent to ensure fixed
relationship between the start of a one/five/fifteen minute
intervals and wall clock, however some agents may align the
fifteen minutes interval with quarter hours.
The following terminologies apply within the scope of this MIB.
o entity - Any physical entity which can support performance
monitoring as specified in this MIB
o Utilization - The ratio of current usage to the maximum
capacity the entity can handle
o Input - Communication channel where packets arrive on the
entity
o Output - Communication channel where packets leave the entity
Acronyms
========
SMA - Simple Moving Average
ciscoEntityPerformanceMIB MODULE-IDENTITY LAST-UPDATED "201009090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable. The performance monitoring includes utilization, input/output packet/byte rates, etc. This monitoring is through the measurement periods of current, 1-minute, 5-minutes, 15-minutes. The performance data calculation method would vary for each entity for a specific interval, hence users of this MIB should obtain the information using the object cepStatsAlgorithm for a specific interval. The performance statistics can be accumulated for the 1-minute, 5-minutes and 15-minutes (recommended) intervals. At any one time, an agent maintains one current (incomplete) interval for each interval type and up to 96 completed interval number. Fewer than 96 interval number of data will be available if the agent has been restarted within the last 24 hours for 15 minutes interval, 8 hours for 5 minutes interval, and 1.36 hours for 1 minute interval. There is no requirement for an agent to ensure fixed relationship between the start of a one/five/fifteen minute intervals and wall clock, however some agents may align the fifteen minutes interval with quarter hours. The following terminologies apply within the scope of this MIB. o entity - Any physical entity which can support performance monitoring as specified in this MIB o Utilization - The ratio of current usage to the maximum capacity the entity can handle o Input - Communication channel where packets arrive on the entity o Output - Communication channel where packets leave the entity Acronyms ======== SMA - Simple Moving Average" REVISION "201009090000Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoMgmt 756 }
ciscoEntityPerformanceMIB OBJECT IDENTIFIER ::= { ciscoMgmt 756 }
Vendor: Cisco
Module: CISCO-ENTITY-PERFORMANCE-MIB
[Automatically extracted from oidview.com]
ciscoEntityPerformanceMIB MODULE-IDENTITY LAST-UPDATED "201009090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable. The performance monitoring includes utilization, input/output packet/byte rates, etc. This monitoring is through the measurement periods of current, 1-minute, 5-minutes, 15-minutes. The performance data calculation method would vary for each entity for a specific interval, hence users of this MIB should obtain the information using the object cepStatsAlgorithm for a specific interval. The performance statistics can be accumulated for the 1-minute, 5-minutes and 15-minutes (recommended) intervals. At any one time, an agent maintains one current (incomplete) interval for each interval type and up to 96 completed interval number. Fewer than 96 interval number of data will be available if the agent has been restarted within the last 24 hours for 15 minutes interval, 8 hours for 5 minutes interval, and 1.36 hours for 1 minute interval. There is no requirement for an agent to ensure fixed relationship between the start of a one/five/fifteen minute intervals and wall clock, however some agents may align the fifteen minutes interval with quarter hours. The following terminologies apply within the scope of this MIB. o entity - Any physical entity which can support performance monitoring as specified in this MIB o Utilization - The ratio of current usage to the maximum capacity the entity can handle o Input - Communication channel where packets arrive on the entity o Output - Communication channel where packets leave the entity Acronyms ======== SMA - Simple Moving Average" REVISION "201009090000Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoMgmt 756 }
ciscoEntityPerformanceMIB MODULE-IDENTITY LAST-UPDATED "201406180000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines managed objects that facilitate to monitor performance of any physical entity, which are listed in the ENTITY-MIB (RFC 4133) entPhysicalTable. The performance monitoring includes utilization, input/output packet/byte rates, etc. This monitoring is through the measurement periods of current, 1-minute, 5-minutes, 15-minutes. The performance data calculation method would vary for each entity for a specific interval, hence users of this MIB should obtain the information using the object cepStatsAlgorithm for a specific interval. The performance statistics can be accumulated for the 1-minute, 5-minutes and 15-minutes (recommended) intervals. At any one time, an agent maintains one current (incomplete) interval for each interval type and up to 96 completed interval number. Fewer than 96 interval number of data will be available if the agent has been restarted within the last 24 hours for 15 minutes interval, 8 hours for 5 minutes interval, and 1.36 hours for 1 minute interval. There is no requirement for an agent to ensure fixed relationship between the start of a one/five/fifteen minute intervals and wall clock, however some agents may align the fifteen minutes interval with quarter hours. The following terminologies apply within the scope of this MIB. o entity - Any physical entity which can support performance monitoring as specified in this MIB o Utilization - The ratio of current usage to the maximum capacity the entity can handle o Input - Communication channel where packets arrive on the entity o Output - Communication channel where packets leave the entity Acronyms ======== SMA - Simple Moving Average" REVISION "201406180000Z" DESCRIPTION "Added the following objects to the MIB. cepThroughputLicensedBW, cepThroughputLevel, cepThroughputInterval, cepThroughputThreshold, cepThroughputAvgRate to cepThroughputTable. Added cepThroughputNotifEnabled to ciscoEntityPerformanceMIBNotifObjects group. Added cepThroughputNotif as a new notification to the MIB. Added a new MIB conform group, ciscoEntityPerformanceMIBThroughputGroup for the new objects. Also modified the ciscoEntityPerformanceMIBCompliance to add the new group ciscoEntityPerformanceMIBThroughputGroup." REVISION "201009090000Z" DESCRIPTION "The initial version of this MIB module." ::= { ciscoMgmt 756 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.756.0 | ciscoEntityPerformanceMIBNotifs | 3 | 3 | None |
| 1.3.6.1.4.1.9.9.756.1 | ciscoEntityPerformanceMIBObjects | 7 | 39 | None |
| 1.3.6.1.4.1.9.9.756.2 | ciscoEntityPerformanceMIBConform | 2 | 11 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.706 | ciscoInterfaceXcvrMonitorMIB | 3 | 33 | A MIB module that provides monitoring information about the transceivers plugged into interface on a system. |
| 1.3.6.1.4.1.9.9.708 | ciscoContentDeliveryStreamingMIB | 2 | 30 | This MIB instrumentation is for managing the Content Delivery and Streaming functionality on Cisco devices. Contents are ingested… |
| 1.3.6.1.4.1.9.9.709 | ciscoVlanGroupMIB | 3 | 18 | MIB module for monitoring and configuring VLAN Group Mapping information. |
| 1.3.6.1.4.1.9.9.710 | ciscoVirtualNicMIB | 3 | 36 | This MIB module defines MIB objects which provide mechanisms to manage the parameters used by or related to Virtual NIC. Virtual s… |
| 1.3.6.1.4.1.9.9.711 | ciscoVrfMIB | 3 | 48 | The MIB module for provisioning and managing network virtualization features. This module provides manageability for VRF, VRF-Lit… |
| 1.3.6.1.4.1.9.9.712 | ciscoWirelessNotificationMIB | 3 | 30 | This MIB is intended to be implemented on those Network Management applications that manage a network of wireless devices through… |
| 1.3.6.1.4.1.9.9.713 | ciscoTrustSecPolicyMIB | 3 | 204 | This MIB module defines managed objects that facilitate the management of various policies within the Cisco Trusted Security (Tru… |
| 1.3.6.1.4.1.9.9.714 | ciscoHwModuleControlMIB | 3 | 27 | The MIB module providing configuration and control information for management of hardware modules and components on Cisco devices… |
| 1.3.6.1.4.1.9.9.715 | ciscoEntityQfpMIB | 3 | 82 | This MIB module defines managed objects that facilitate the management of Quantum Flow Processors (QFP), which are listed in the … |
| 1.3.6.1.4.1.9.9.716 | ciscoVoIpTapMIB | 3 | 18 | This module manages Cisco's intercept feature for Voice over IP (VoIP). This MIB is used along with CISCO-TAP2-MIB to intercept V… |
| 1.3.6.1.4.1.9.9.718 | ciscoCuicappsMIB | 3 | 130 | The Cisco Unified Intelligence Center (CUIC) is a scalable robust and secure reporting solution for contact center applications. T… |
| 1.3.6.1.4.1.9.9.719 | ciscoUnifiedComputingMIB | 5 | 13463 | This MIB module defines the managed objects for Unified Computing System (UCS) Manager. Cisco UCS Manager provides centralized m… |
| 1.3.6.1.4.1.9.9.720 | ciscoTrustSecSxpMIB | 3 | 140 | This MIB module is for the configuration and status query of SGT Exchange Protocol over TCP (SXPoTCP) feature of the device on th… |
| 1.3.6.1.4.1.9.9.721 | ciscoMldSnoopingMIB | 3 | 215 | This MIB module defines objects that describe IGMP/MLD snooping. It provides remote network management system the ability to manag… |
| 1.3.6.1.4.1.9.9.724 | cggsnGeoMIB | 2 | 12 | This MIB provide additional information for passive interface configured for each OSPF process, independent of object creation in… |
| 1.3.6.1.4.1.9.9.725 | ciscoSmartInstallMIB | 3 | 101 | This MIB module defines managed objects that facilitate the management of Smart Install feature. Smart Install is a plug-and-pla… |
| 1.3.6.1.4.1.9.9.729 | ciscoCdstvServicesMIB | 3 | 21 | This MIB module defines service monitoring objects that faciliate the management of the Cisco Content Delivery System for TV (CDS… |
| 1.3.6.1.4.1.9.9.730 | ciscoTrustSecMIB | 3 | 128 | This MIB module is for the configuration of a network device on the Cisco Trusted Security (TrustSec) system. TrustSec secures a … |
| 1.3.6.1.4.1.9.9.731 | ciscoEpcGatewayMIB | 3 | 130 | This MIB module manages the features and configuration for PDN Gateway(PGW) and Serving Gateway(SGW) in Evolved Packet Core(EPC) … |
| 1.3.6.1.4.1.9.9.732 | ciscoDeviceLocationMIB | 3 | 49 | This MIB is used for managing location information of end point devices(Telepresence, IP Camera, Digital media player etc) connec… |
| 1.3.6.1.4.1.9.9.733 | ciscoMeetingPlaceMIB | 3 | 70 | This MIB allows management of Cisco Unified MeetingPlace (CUMP) features, CUMP is the key conferencing solution component for Cis… |
| 1.3.6.1.4.1.9.9.734 | ciscoGtpv2MIB | 2 | 160 | This MIB module manages the GPRS Tunneling Protocol version 2(GTPv2) statistics for the Evolved Packet Core(EPC) architecture. SGW… |
| 1.3.6.1.4.1.9.9.735 | ciscoCdstvFsiMIB | 3 | 25 | This MIB module defines FSI configurartion objects that faciliate the management of the Cisco Content Delivery System for TV (CDS… |
| 1.3.6.1.4.1.9.9.736 | ciscoRadiusExtMIB | 2 | 51 | This MIB module defines objects describing RADIUS (Remote Access Dialin User Service), serving as an extension of the following M… |
| 1.3.6.1.4.1.9.9.737 | ciscoSwitchNetflowMIB | 3 | 40 | This MIB module defines management objects for the Netflow features on Cisco Layer 2 and Layer 3 devices. |
| 1.3.6.1.4.1.9.9.738 | cmplsTeStdExtMIB | 3 | 72 | This MIB module contains Cisco specific managed object definitions for MPLS Traffic Engineering (TE), not contained in MPLS-TE-ST… |
| 1.3.6.1.4.1.9.9.739 | ciscoCdstvIngestmgrMIB | 3 | 69 | This MIB module defines ingest manager configuration objects that faciliate the management of the Cisco Content Delivery System f… |
| 1.3.6.1.4.1.9.9.740 | ciscoTrustSecIfMIB | 3 | 143 | This MIB module defines management objects for configuration and monitoring of the interfaces in Cisco Trusted Security environme… |
| 1.3.6.1.4.1.9.9.741 | ciscoTrustSecServerMIB | 3 | 85 | This MIB module defines management objects for configuration and monitoring of the AAA servers in Cisco Trusted Security environm… |
| 1.3.6.1.4.1.9.9.742 | ciscoIpAddressPoolTcMIB | 0 | 0 | This MIB module defines textual conventions used by MIB modules defining objects describing IP address pools. |
| 1.3.6.1.4.1.9.9.743 | ciscoCdstvCsStatsMIB | 3 | 83 | This MIB module defines objects describing the caching and streaming statistics objects that facilitate the management of the Cis… |
| 1.3.6.1.4.1.9.9.744 | ciscoIpslaVideoMIB | 3 | 73 | IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, net… |
| 1.3.6.1.4.1.9.9.745 | ciscoEntitySensorExtMIB | 3 | 21 | This MIB is extension to ENTITY-SENSOR-MIB(RFC 3433). This MIB also defines the notifications applicable for sensors reported in … |
| 1.3.6.1.4.1.9.9.748 | ciscoIpAddressPoolMIB | 3 | 96 | This MIB modules defines objects that describe common aspects of IP address pools. IP Address Pool Manager =======================… |
| 1.3.6.1.4.1.9.9.749 | ciscoCdstvBwmgrMIB | 3 | 21 | This MIB module defines Bandwidth Manager configuration objects that facilitate the management of the Cisco Content Delivery Syst… |
| 1.3.6.1.4.1.9.9.750 | ciscoCdstvIngestTuningMIB | 3 | 18 | This MIB module defines ingest tuning configuration objects that facilitate the management of the Cisco Content Delivery System f… |
| 1.3.6.1.4.1.9.9.751 | ciscoCdstvAuthmgrMIB | 3 | 25 | This MIB module defines objects that describe the configuration of the authentication manager for the Cisco Content Delivery Syst… |
| 1.3.6.1.4.1.9.9.753 | ciscoVideoSessionMIB | 3 | 145 | This MIB module complements the CISCO-VOICE-DIAL-CONTROL-MIB, which provides voice telephony peer information, by providing manag… |
| 1.3.6.1.4.1.9.9.754 | ciscoCdstvServerMIB | 3 | 82 | This MIB module defines server configuration that faciliate the management of the Cisco Content Delivery System for TV (CDS-TV) … |
| 1.3.6.1.4.1.9.9.755 | ciscoCdstvIsaMIB | 3 | 145 | This MIB module defines ISA configuration objects that faciliate the management of the Cisco Content Delivery System for TV (CDS-… |
| 1.3.6.1.4.1.9.9.757 | ciscoSbcStatsMIB | 3 | 106 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. This MIB categori… |
| 1.3.6.1.4.1.9.9.758 | ciscoTelepresenceExchangeSystemMIB | 3 | 173 | The main purpose of this MIB is to provide product component level configuration, status, statistics, events, and alarm notificat… |
| 1.3.6.1.4.1.9.9.759 | ciscoGdoiMIB | 3 | 213 | This MIB module defines objects for managing the GDOI protocol. Copyright (c) The IETF Trust (2010). This version of this MIB mo… |
| 1.3.6.1.4.1.9.9.760 | ciscoPtpMIB | 3 | 182 | The MIB module for PTPv2 (IEEE1588 - 2008) Overview of PTPv2 (IEEE 1588-2008) This IEEE standard defines a protocol enabling prec… |
| 1.3.6.1.4.1.9.9.761 | ciscoNetsyncMIB | 3 | 104 | The Synchronous Ethernet (SyncE) MIB is defined for monitoring network synchronization based on ITU-T G.781 clock selection. Sync… |
| 1.3.6.1.4.1.9.9.762 | ciscoWanOptimizationMIB | 3 | 302 | This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as m… |
| 1.3.6.1.4.1.9.9.763 | ciscoVideoTc | 0 | 0 | This MIB module defines a collection of common video-related textual conventions to be used in Cisco MIBS for video-capable produ… |
| 1.3.6.1.4.1.9.9.764 | ciscoUbeMIB | 2 | 12 | This MIB describes objects used for managing Cisco Unified Border Element (CUBE). The Cisco Unified Border Element (CUBE) is a Ci… |
| 1.3.6.1.4.1.9.9.765 | ciscoFlowCloneMIB | 3 | 44 | This MIB module defines objects that manages flow cloning feature. A flow cloning can be described as a hardware or software enti… |
| 1.3.6.1.4.1.9.9.766 | ciscoIpslaVideoProfileMIB | 3 | 29 | IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, net… |
| 1.3.6.1.4.1.9.9.767 | ciscoLwappDot11ClientRmMIB | 3 | 64 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.768 | ciscoEntitySensorHistoryMIB | 2 | 20 | This MIB module defines objects that describe collections and measurement information for each sensor supporting historical data … |
| 1.3.6.1.4.1.9.9.769 | ciscoMediaQualityMIB | 3 | 214 | This MIB module enhances the DIAL-CONTROL-MIB (RFC2128) by providing call information and voice and video quality statistics of c… |
| 1.3.6.1.4.1.9.9.770 | ciscoTcpMetricsMIB | 4 | 22 | This MIB module defines objects that describe the quality metrics of TCP streams. GLOSSARY ============ Flow Monitor - a hardware o… |
| 1.3.6.1.4.1.9.9.771 | ciscoMediaMetricsMIB | 4 | 38 | This MIB module defines objects that describe the quality metrics of Media streams. GLOSSARY ============ Flow Monitor - a hardware… |
| 1.3.6.1.4.1.9.9.772 | ciscoPfrMIB | 3 | 303 | This MIB module defines objects that describe Performance Routing (PfR). Standard routing protocols base routing decisions on re… |
| 1.3.6.1.4.1.9.9.773 | ciscoSwitchRateLimiterMIB | 3 | 28 | This MIB module defines management objects for the Switch Rate Limiter features on Cisco Layer 2 and Layer 3 devices. Rate limits … |
| 1.3.6.1.4.1.9.9.774 | ciscoVdcMIB | 3 | 90 | CISCO-VDC-MIB |
| 1.3.6.1.4.1.9.9.775 | ciscoSelectiveVrfDownloadMIB | 3 | 41 | This MIB module defines objects describing selective VRF download. The selective VRF download feature makes a best effort to dow… |
| 1.3.6.1.4.1.9.9.776 | ciscoNetflowLiteMIB | 3 | 56 | This MIB provides a method to configure Netflow-lite feature and get information in these areas: 1. Exporter config information a… |
| 1.3.6.1.4.1.9.9.777 | ciscoDsgIfExtMIB | 3 | 15 | A MIB module for extending the DSG-IF-MIB (ITU-T J.128 10/2008) to add objects which provide additional management information ab… |
| 1.3.6.1.4.1.9.9.779 | ciscoPmonMIB | 3 | 14 | This MIB module is for providing the port monitoring information. |
| 1.3.6.1.4.1.9.9.782 | ciscoSubscriberIdentityTcMIB | 0 | 0 | This MIB module defines textual conventions describing subscriber session identities. A subscriber session identity consists of … |
| 1.3.6.1.4.1.9.9.783 | ciscoDynamicTemplateTcMIB | 0 | 0 | This MIB module defines textual conventions used by the CISCO-DYNAMIC-TEMPLATE-MIB and MIB modules that use and expand on dynamic… |
| 1.3.6.1.4.1.9.9.784 | ciscoDynamicTemplateMIB | 3 | 152 | This MIB defines objects that describe dynamic templates. A dynamic template is a set of configuration attributes that a system … |
| 1.3.6.1.4.1.9.9.785 | ciscoSubscriberSessionTcMIB | 0 | 0 | This MIB module defines textual conventions describing subscriber sessions. |
| 1.3.6.1.4.1.9.9.786 | ciscoSubscriberSessionMIB | 3 | 187 | This MIB defines objects describing subscriber sessions, or more specifically, subscriber sessions terminated by a RAS. A subscr… |
| 1.3.6.1.4.1.9.9.789 | ciscoFlowMetadataMIB | 3 | 30 | The MIB module for managing Cisco medianet flow metadata. Metadata, in the simplest form, is data that qualifies other data. Flow… |
| 1.3.6.1.4.1.9.9.790 | ciscoSwitchCefMIB | 3 | 33 | This MIB module defines management objects for the CEF features on Cisco Layer 2 and Layer 3 devices. Definition of some of the t… |
| 1.3.6.1.4.1.9.9.791 | ciscoAppNavMIB | 2 | 51 | This MIB module defines SNMP management objects describing the AppNav technology. A device, which implements the AppNav technolog… |
| 1.3.6.1.4.1.9.9.793 | ciscoMspMIB | 3 | 54 | Objective of media services proxy is to provide media services to end-points and its flows identified by a set of protocols. Medi… |
| 1.3.6.1.4.1.9.9.798 | ciscoLocalAuthUserMIB | 3 | 40 | This MIB module defines objects describing users authenticated locally by a Network Access Server (NAS). + | | | … |
| 1.3.6.1.4.1.9.9.800 | ciscoMediatraceMIB | 3 | 191 | Mediatrace helps to isolate and troubleshoot network degradation problems by enabling a network administrator to discover an Inte… |
| 1.3.6.1.4.1.9.9.801 | ciscoFabricPathTopologyMIB | 3 | 40 | This MIB module defines managed objects that facilitate the management of Cisco's FabricPath Topology technology. |
| 1.3.6.1.4.1.9.9.803 | ciscoSwitchFabricMIB | 3 | 30 | This MIB module defined managed objects that facilitates the management of switching fabric information in a Cisco switch. |
| 1.3.6.1.4.1.9.9.804 | ciscoHardwareIpVerifyMIB | 3 | 13 | This MIB module defines management objects for configuration and monitoring of the Intrusion Detection System (IDS) that checks f… |
| 1.3.6.1.4.1.9.9.806 | ciscoL2natMIB | 2 | 80 | Network Address Translation (NAT) involves translating the source and or destination IP addresses of packets as they traverse fro… |
| ... | ||||