Reference record for OID 1.3.6.1.4.1.9.9.761

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

761

node name

ciscoNetsyncMIB

dot oid

1.3.6.1.4.1.9.9.761

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoNetsyncMIB(761)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetsyncMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetsyncMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetsyncMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetsyncMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoNetsyncMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoNetsyncMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/761

Description by circitor

The Synchronous Ethernet (SyncE) MIB is defined
for monitoring network synchronization based on
ITU-T G.781 clock selection.

Synchronous Ethernet (SyncE) is a standard defined
for delivering timing to the remote NEs through a
Packet Network. SyncE is well defined by ITU-T
which included G.8261, G.8262, G.8264 and G.781.
It leverages the PHY layer of Ethernet to transmit
frequency to the remote sites. Its functionality
and accuracy mimics that of the SONET/SDH network
because of its physical layer characteristic.
In order to allow best clock source traceabiliy,
correctly define the timing source and helps
preventing timing loop, Synchronization Status
Message is required for SyncE. This is similar
to SONET/SDH. However, since SONET/SDH use 4 bits
from the two S bytes in the SONET/SDH overhead
frame for such message, Ethernet relies on a
different channel called ESMC (Ethernet
Synchronization Messaging Channel) which is based
on IEEE 802.3 Organization Specific Slow Protocol.

Glossary:
AIS: Alarm Indication Signal
ATM: Asynchronous Transfer Mode
EEC: Ethernet Equipment Clock
ESMC: Ethernet Synchronization Messaging Channel
QL: Quality Level
SASE: Stand Alone Synchronization Equipment
SSM: Synchronization Status Messaging

Parsed from file CISCO-NETSYNC-MIB.mib
Module: CISCO-NETSYNC-MIB

Description by mibdepot

The Synchronous Ethernet (SyncE) MIB is defined
for monitoring network synchronization based on
ITU-T G.781 clock selection.

Synchronous Ethernet (SyncE) is a standard defined
for delivering timing to the remote NEs through a
Packet Network. SyncE is well defined by ITU-T
which included G.8261, G.8262, G.8264 and G.781.
It leverages the PHY layer of Ethernet to transmit
frequency to the remote sites. Its functionality
and accuracy mimics that of the SONET/SDH network
because of its physical layer characteristic.
In order to allow best clock source traceabiliy,
correctly define the timing source and helps
preventing timing loop, Synchronization Status
Message is required for SyncE. This is similar
to SONET/SDH. However, since SONET/SDH use 4 bits
from the two S bytes in the SONET/SDH overhead
frame for such message, Ethernet relies on a
different channel called ESMC (Ethernet
Synchronization Messaging Channel) which is based
on IEEE 802.3 Organization Specific Slow Protocol.

Glossary:
AIS: Alarm Indication Signal
ATM: Asynchronous Transfer Mode
EEC: Ethernet Equipment Clock
ESMC: Ethernet Synchronization Messaging Channel
QL: Quality Level
SASE: Stand Alone Synchronization Equipment
SSM: Synchronization Status Messaging

Parsed from file CISCO-NETSYNC-MIB.my.txt
Company: None
Module: CISCO-NETSYNC-MIB

Description by cisco

The Synchronous Ethernet (SyncE) MIB is defined
for monitoring network synchronization based on
ITU-T G.781 clock selection.

Synchronous Ethernet (SyncE) is a standard defined
for delivering timing to the remote NEs through a
Packet Network. SyncE is well defined by ITU-T
which included G.8261, G.8262, G.8264 and G.781.
It leverages the PHY layer of Ethernet to transmit
frequency to the remote sites. Its functionality
and accuracy mimics that of the SONET/SDH network
because of its physical layer characteristic.
In order to allow best clock source traceabiliy,
correctly define the timing source and helps
preventing timing loop, Synchronization Status
Message is required for SyncE. This is similar
to SONET/SDH. However, since SONET/SDH use 4 bits
from the two S bytes in the SONET/SDH overhead
frame for such message, Ethernet relies on a
different channel called ESMC (Ethernet
Synchronization Messaging Channel) which is based
on IEEE 802.3 Organization Specific Slow Protocol.

Glossary:
AIS: Alarm Indication Signal
ATM: Asynchronous Transfer Mode
EEC: Ethernet Equipment Clock
ESMC: Ethernet Synchronization Messaging Channel
QL: Quality Level
SASE: Stand Alone Synchronization Equipment
SSM: Synchronization Status Messaging

Information by circitor

ciscoNetsyncMIB MODULE-IDENTITY
    LAST-UPDATED    "201010150000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service


            Postal: 170 W Tasman Drive

            San Jose, CA  95134

            USA


            Tel: +1 800 553-NETS


            E-mail: [email protected]"
    DESCRIPTION
        "The Synchronous Ethernet (SyncE) MIB is defined
        for monitoring network synchronization based on
        ITU-T G.781 clock selection.
        
        Synchronous Ethernet (SyncE) is a standard defined
        for delivering timing to the remote NEs through a 
        Packet Network.   SyncE is well defined by ITU-T
        which included G.8261, G.8262, G.8264 and G.781.
        It leverages the PHY layer of Ethernet to transmit
        frequency to the remote sites.  Its functionality
        and accuracy mimics that of the SONET/SDH network
        because of its physical layer characteristic.
        In order to allow best clock source traceabiliy,
        correctly define the timing source and helps
        preventing timing loop, Synchronization Status
        Message is required for SyncE.  This is similar
        to SONET/SDH.  However, since SONET/SDH use 4 bits
        from the two S bytes in the SONET/SDH overhead
        frame for such message, Ethernet relies on a
        different channel called ESMC (Ethernet
        Synchronization Messaging Channel) which is based
        on IEEE 802.3 Organization Specific Slow Protocol.
        
        Glossary:
        AIS: Alarm Indication Signal
        ATM: Asynchronous Transfer Mode
        EEC: Ethernet Equipment Clock
        ESMC: Ethernet Synchronization Messaging Channel
        QL: Quality Level
        SASE: Stand Alone Synchronization Equipment
        SSM: Synchronization Status Messaging"
    REVISION        "201010150000Z"
    DESCRIPTION
        "Initial version of the SyncE MIB module."
    ::= { ciscoMgmt 761 }

Information by cisco_v1

ciscoNetsyncMIB OBJECT IDENTIFIER ::= { ciscoMgmt 761 }

Information by oid_info

Vendor: Cisco
Module: CISCO-NETSYNC-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoNetsyncMIB MODULE-IDENTITY
    LAST-UPDATED    "201010150000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service


            Postal: 170 W Tasman Drive

            San Jose, CA  95134

            USA


            Tel: +1 800 553-NETS


            E-mail: [email protected]"
    DESCRIPTION
        "The Synchronous Ethernet (SyncE) MIB is defined
        for monitoring network synchronization based on
        ITU-T G.781 clock selection.
        
        Synchronous Ethernet (SyncE) is a standard defined
        for delivering timing to the remote NEs through a 
        Packet Network.   SyncE is well defined by ITU-T
        which included G.8261, G.8262, G.8264 and G.781.
        It leverages the PHY layer of Ethernet to transmit
        frequency to the remote sites.  Its functionality
        and accuracy mimics that of the SONET/SDH network
        because of its physical layer characteristic.
        In order to allow best clock source traceabiliy,
        correctly define the timing source and helps
        preventing timing loop, Synchronization Status
        Message is required for SyncE.  This is similar
        to SONET/SDH.  However, since SONET/SDH use 4 bits
        from the two S bytes in the SONET/SDH overhead
        frame for such message, Ethernet relies on a
        different channel called ESMC (Ethernet
        Synchronization Messaging Channel) which is based
        on IEEE 802.3 Organization Specific Slow Protocol.
        
        Glossary:
        AIS: Alarm Indication Signal
        ATM: Asynchronous Transfer Mode
        EEC: Ethernet Equipment Clock
        ESMC: Ethernet Synchronization Messaging Channel
        QL: Quality Level
        SASE: Stand Alone Synchronization Equipment
        SSM: Synchronization Status Messaging"
    REVISION        "201010150000Z"
    DESCRIPTION
        "Initial version of the SyncE MIB module."
    ::= { ciscoMgmt 761 }

Information by cisco

ciscoNetsyncMIB MODULE-IDENTITY
    LAST-UPDATED    "201010150000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service


            Postal: 170 W Tasman Drive

            San Jose, CA  95134

            USA


            Tel: +1 800 553-NETS


            E-mail: [email protected]"
    DESCRIPTION
        "The Synchronous Ethernet (SyncE) MIB is defined
        for monitoring network synchronization based on
        ITU-T G.781 clock selection.
        
        Synchronous Ethernet (SyncE) is a standard defined
        for delivering timing to the remote NEs through a 
        Packet Network.   SyncE is well defined by ITU-T
        which included G.8261, G.8262, G.8264 and G.781.
        It leverages the PHY layer of Ethernet to transmit
        frequency to the remote sites.  Its functionality
        and accuracy mimics that of the SONET/SDH network
        because of its physical layer characteristic.
        In order to allow best clock source traceabiliy,
        correctly define the timing source and helps
        preventing timing loop, Synchronization Status
        Message is required for SyncE.  This is similar
        to SONET/SDH.  However, since SONET/SDH use 4 bits
        from the two S bytes in the SONET/SDH overhead
        frame for such message, Ethernet relies on a
        different channel called ESMC (Ethernet
        Synchronization Messaging Channel) which is based
        on IEEE 802.3 Organization Specific Slow Protocol.
        
        Glossary:
        AIS: Alarm Indication Signal
        ATM: Asynchronous Transfer Mode
        EEC: Ethernet Equipment Clock
        ESMC: Ethernet Synchronization Messaging Channel
        QL: Quality Level
        SASE: Stand Alone Synchronization Equipment
        SSM: Synchronization Status Messaging"
    REVISION        "201010150000Z"
    DESCRIPTION
        "Initial version of the SyncE MIB module."
    ::= { ciscoMgmt 761 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (3)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.