Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS. No more than a single PME can be assigned to this PCS in
this case.
When 'enabled', PAF will be performed by the PCS when the link
is Up, even on a single attached PME, if PAF is supported.
PCS ports incapable of supporting PAF SHALL return a value of
'disabled'. Attempts to 'enable' such ports SHALL be
rejected.
A PAF 'enabled' port with multiple PMEs assigned cannot be
'disabled'. Attempts to 'disable' such port SHALL be
rejected, until at most one PME is left assigned.
Changing PAFAdminState is a traffic-disruptive operation and
as such SHALL be done when the link is Down. Attempts to
change this object SHALL be rejected if the link is Up or
Initializing.
This object maps to the Clause 30 attribute aPAFAdminState.
If a Clause 45 MDIO Interface to the PCS is present, then this
object maps to the PAF enable bit in the 10P/2B PCS control
register.
This object MUST be maintained in a persistent manner.
Parsed from file rfc5066-EFMCu-Interfaces.mib-2.txt
Company: None
Module: EFM-CU-MIB
Administrative (desired) state of the PAF of the EFMCu port
(PCS).
When 'disabled', PME aggregation will not be performed by the
PCS. No more than a single PME can be assigned to this PCS in
this case.
When 'enabled', PAF will be performed by the PCS when the link
is Up, even on a single attached PME, if PAF is supported.
PCS ports incapable of supporting PAF SHALL return a value of
'disabled'. Attempts to 'enable' such ports SHALL be
rejected.
A PAF 'enabled' port with multiple PMEs assigned cannot be
'disabled'. Attempts to 'disable' such port SHALL be
rejected, until at most one PME is left assigned.
Changing PAFAdminState is a traffic-disruptive operation and
as such SHALL be done when the link is Down. Attempts to
change this object SHALL be rejected if the link is Up or
Initializing.
This object maps to the Clause 30 attribute aPAFAdminState.
If a Clause 45 MDIO Interface to the PCS is present, then this
object maps to the PAF enable bit in the 10P/2B PCS control
register.
This object MUST be maintained in a persistent manner.
Parsed from file EFM-CU-MIB.mib
Module: EFM-CU-MIB
Vendor: IETF RFCs
Module: EFM-CU-MIB (rfc5066-EFMCu-Interfaces.mib-2)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
efmCuPAFAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME aggregation will not be performed by the PCS. No more than a single PME can be assigned to this PCS in this case. When 'enabled', PAF will be performed by the PCS when the link is Up, even on a single attached PME, if PAF is supported. PCS ports incapable of supporting PAF SHALL return a value of 'disabled'. Attempts to 'enable' such ports SHALL be rejected. A PAF 'enabled' port with multiple PMEs assigned cannot be 'disabled'. Attempts to 'disable' such port SHALL be rejected, until at most one PME is left assigned. Changing PAFAdminState is a traffic-disruptive operation and as such SHALL be done when the link is Down. Attempts to change this object SHALL be rejected if the link is Up or Initializing. This object maps to the Clause 30 attribute aPAFAdminState. If a Clause 45 MDIO Interface to the PCS is present, then this object maps to the PAF enable bit in the 10P/2B PCS control register. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 61.2.2, 45.2.3.18.3" ::= { efmCuPortConfEntry 1 }
efmCuPAFAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME aggregation will not be performed by the PCS. No more than a single PME can be assigned to this PCS in this case. When 'enabled', PAF will be performed by the PCS when the link is Up, even on a single attached PME, if PAF is supported. PCS ports incapable of supporting PAF SHALL return a value of 'disabled'. Attempts to 'enable' such ports SHALL be rejected. A PAF 'enabled' port with multiple PMEs assigned cannot be 'disabled'. Attempts to 'disable' such port SHALL be rejected, until at most one PME is left assigned. Changing PAFAdminState is a traffic-disruptive operation and as such SHALL be done when the link is Down. Attempts to change this object SHALL be rejected if the link is Up or Initializing. This object maps to the Clause 30 attribute aPAFAdminState. If a Clause 45 MDIO Interface to the PCS is present, then this object maps to the PAF enable bit in the 10P/2B PCS control register. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 61.2.2, 45.2.3.18.3" ::= { efmCuPortConfEntry 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.167.1.1.1.1.2 | efmCuPAFDiscoveryCode | 0 | 0 | PAF Discovery Code of the EFMCu port (PCS). A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports… |
| 1.3.6.1.2.1.167.1.1.1.1.3 | efmCuAdminProfile | 0 | 0 | Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either … |
| 1.3.6.1.2.1.167.1.1.1.1.4 | efmCuTargetDataRate | 0 | 0 | Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restriction… |
| 1.3.6.1.2.1.167.1.1.1.1.5 | efmCuTargetSnrMgn | 0 | 0 | Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the diff… |
| 1.3.6.1.2.1.167.1.1.1.1.6 | efmCuAdaptiveSpectra | 0 | 0 | Indicates how to utilize excess capacity when the copper environment allows a higher total data rate to be achieved than that spe… |
| 1.3.6.1.2.1.167.1.1.1.1.7 | efmCuThreshLowRate | 0 | 0 | This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches… |
| 1.3.6.1.2.1.167.1.1.1.1.8 | efmCuLowRateCrossingEnable | 0 | 0 | Indicates whether efmCuLowRateCrossing notifications should be generated for this interface. A value of true(1) indicates that ef… |