Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in
either efmCuPme2BProfileTable or
efmCuPme10PProfileTable, depending on the current
operating SubType of the EFMCu port as indicated by
efmCuPortSide.
The value of this object is a list of up to 6 indices of
profiles. If this list consists of a single profile index,
then all PMEs assigned to this EFMCu port SHALL be configured
according to the profile referenced by that index, unless it
is overwritten by a corresponding non-zero
efmCuPmeAdminProfile instance, which takes precedence over
efmCuAdminProfile.
A list consisting of more than one index allows each PME
in the port to be configured according to any profile
specified in the list.
By default, this object has a value of 0x01, referencing the
1st entry in efmCuPme2BProfileTable or
efmCuPme10PProfileTable.
This object is writable and readable for the -O subtype
(2BaseTL-O or 10PassTS-O) EFMCu ports. It is irrelevant for
the -R subtype (2BaseTL-R or 10PassTS-R) ports
zero-length octet string SHALL be returned on an attempt to
read this object and an attempt to change this object MUST be
rejected in this case.
Note that the current operational profile value is available
via the efmCuPmeOperProfile object.
Any modification of this object MUST be performed when the
link is Down. Attempts to change this object MUST be
rejected, if the link is Up or Initializing.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding profile table MUST be rejected.
This object maps to the Clause 30 attribute aProfileSelect.
This object MUST be maintained in a persistent manner.
Parsed from file rfc5066-EFMCu-Interfaces.mib-2.txt
Company: None
Module: EFM-CU-MIB
Desired configuration profile(s), common for all PMEs in the
EFMCu port. This object is a list of pointers to entries in
either efmCuPme2BProfileTable or
efmCuPme10PProfileTable, depending on the current
operating SubType of the EFMCu port as indicated by
efmCuPortSide.
The value of this object is a list of up to 6 indices of
profiles. If this list consists of a single profile index,
then all PMEs assigned to this EFMCu port SHALL be configured
according to the profile referenced by that index, unless it
is overwritten by a corresponding non-zero
efmCuPmeAdminProfile instance, which takes precedence over
efmCuAdminProfile.
A list consisting of more than one index allows each PME
in the port to be configured according to any profile
specified in the list.
By default, this object has a value of 0x01, referencing the
1st entry in efmCuPme2BProfileTable or
efmCuPme10PProfileTable.
This object is writable and readable for the -O subtype
(2BaseTL-O or 10PassTS-O) EFMCu ports. It is irrelevant for
the -R subtype (2BaseTL-R or 10PassTS-R) ports
zero-length octet string SHALL be returned on an attempt to
read this object and an attempt to change this object MUST be
rejected in this case.
Note that the current operational profile value is available
via the efmCuPmeOperProfile object.
Any modification of this object MUST be performed when the
link is Down. Attempts to change this object MUST be
rejected, if the link is Up or Initializing.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding profile table MUST be rejected.
This object maps to the Clause 30 attribute aProfileSelect.
This object MUST be maintained in a persistent manner.
Parsed from file EFM-CU-MIB.mib
Module: EFM-CU-MIB
Vendor: IETF RFCs
Module: EFM-CU-MIB (rfc5066-EFMCu-Interfaces.mib-2)
Type: TABULAR
Access: read-write
Syntax: EfmProfileIndexList
Automatically extracted from www.mibdepot.com
efmCuAdminProfile OBJECT-TYPE SYNTAX EfmProfileIndexList MAX-ACCESS read-write STATUS current DESCRIPTION "Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either efmCuPme2BProfileTable or efmCuPme10PProfileTable, depending on the current operating SubType of the EFMCu port as indicated by efmCuPortSide. The value of this object is a list of up to 6 indices of profiles. If this list consists of a single profile index, then all PMEs assigned to this EFMCu port SHALL be configured according to the profile referenced by that index, unless it is overwritten by a corresponding non-zero efmCuPmeAdminProfile instance, which takes precedence over efmCuAdminProfile. A list consisting of more than one index allows each PME in the port to be configured according to any profile specified in the list. By default, this object has a value of 0x01, referencing the 1st entry in efmCuPme2BProfileTable or efmCuPme10PProfileTable. This object is writable and readable for the -O subtype (2BaseTL-O or 10PassTS-O) EFMCu ports. It is irrelevant for the -R subtype (2BaseTL-R or 10PassTS-R) ports zero-length octet string SHALL be returned on an attempt to read this object and an attempt to change this object MUST be rejected in this case. Note that the current operational profile value is available via the efmCuPmeOperProfile object. Any modification of this object MUST be performed when the link is Down. Attempts to change this object MUST be rejected, if the link is Up or Initializing. Attempts to set this object to a list with a member value that is not the value of the index for an active entry in the corresponding profile table MUST be rejected. This object maps to the Clause 30 attribute aProfileSelect. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 30.11.2.1.6" DEFVAL { '01'H } ::= { efmCuPortConfEntry 3 }
efmCuAdminProfile OBJECT-TYPE SYNTAX EfmProfileIndexList MAX-ACCESS read-write STATUS current DESCRIPTION "Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either efmCuPme2BProfileTable or efmCuPme10PProfileTable, depending on the current operating SubType of the EFMCu port as indicated by efmCuPortSide. The value of this object is a list of up to 6 indices of profiles. If this list consists of a single profile index, then all PMEs assigned to this EFMCu port SHALL be configured according to the profile referenced by that index, unless it is overwritten by a corresponding non-zero efmCuPmeAdminProfile instance, which takes precedence over efmCuAdminProfile. A list consisting of more than one index allows each PME in the port to be configured according to any profile specified in the list. By default, this object has a value of 0x01, referencing the 1st entry in efmCuPme2BProfileTable or efmCuPme10PProfileTable. This object is writable and readable for the -O subtype (2BaseTL-O or 10PassTS-O) EFMCu ports. It is irrelevant for the -R subtype (2BaseTL-R or 10PassTS-R) ports zero-length octet string SHALL be returned on an attempt to read this object and an attempt to change this object MUST be rejected in this case. Note that the current operational profile value is available via the efmCuPmeOperProfile object. Any modification of this object MUST be performed when the link is Down. Attempts to change this object MUST be rejected, if the link is Up or Initializing. Attempts to set this object to a list with a member value that is not the value of the index for an active entry in the corresponding profile table MUST be rejected. This object maps to the Clause 30 attribute aProfileSelect. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 30.11.2.1.6" DEFVAL { '01'H } ::= { efmCuPortConfEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.167.1.1.1.1.1 | efmCuPAFAdminState | 0 | 0 | Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME aggregation will not be performed by the P… |
| 1.3.6.1.2.1.167.1.1.1.1.2 | efmCuPAFDiscoveryCode | 0 | 0 | PAF Discovery Code of the EFMCu port (PCS). A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports… |
| 1.3.6.1.2.1.167.1.1.1.1.4 | efmCuTargetDataRate | 0 | 0 | Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restriction… |
| 1.3.6.1.2.1.167.1.1.1.1.5 | efmCuTargetSnrMgn | 0 | 0 | Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the diff… |
| 1.3.6.1.2.1.167.1.1.1.1.6 | efmCuAdaptiveSpectra | 0 | 0 | Indicates how to utilize excess capacity when the copper environment allows a higher total data rate to be achieved than that spe… |
| 1.3.6.1.2.1.167.1.1.1.1.7 | efmCuThreshLowRate | 0 | 0 | This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches… |
| 1.3.6.1.2.1.167.1.1.1.1.8 | efmCuLowRateCrossingEnable | 0 | 0 | Indicates whether efmCuLowRateCrossing notifications should be generated for this interface. A value of true(1) indicates that ef… |