Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin
is the difference between the desired SNR and the actual SNR).
Note that 802.3ah recommends using a default target SNR margin
of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in
order to achieve a mean Bit Error Rate (BER) of 10^-7 at the
PMA service interface.
This object is read-write for the -O subtype EFMCu ports
(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
Changing of the target SNR margin MUST be performed when the
link is Down. Attempts to change this object MUST be rejected
(in case of SNMP with the error inconsistentValue), if the
link is Up or Initializing.
Note that the current SNR margin of the PMEs comprising the
EFMCu port is represented by efmCuPmeSnrMgn.
This object MUST be maintained in a persistent manner.
Parsed from file rfc5066-EFMCu-Interfaces.mib-2.txt
Company: None
Module: EFM-CU-MIB
Desired EFMCu port SNR margin to be achieved on all PMEs
assigned to the port, during initialization. (The SNR margin
is the difference between the desired SNR and the actual SNR).
Note that 802.3ah recommends using a default target SNR margin
of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in
order to achieve a mean Bit Error Rate (BER) of 10^-7 at the
PMA service interface.
This object is read-write for the -O subtype EFMCu ports
(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
Changing of the target SNR margin MUST be performed when the
link is Down. Attempts to change this object MUST be rejected
(in case of SNMP with the error inconsistentValue), if the
link is Up or Initializing.
Note that the current SNR margin of the PMEs comprising the
EFMCu port is represented by efmCuPmeSnrMgn.
This object MUST be maintained in a persistent manner.
Parsed from file EFM-CU-MIB.mib
Module: EFM-CU-MIB
Vendor: IETF RFCs
Module: EFM-CU-MIB (rfc5066-EFMCu-Interfaces.mib-2)
Type: TABULAR
Access: read-write
Syntax: Unsigned32
(
0..21 )
Automatically extracted from www.mibdepot.com
efmCuTargetSnrMgn OBJECT-TYPE SYNTAX Unsigned32(0..21) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the difference between the desired SNR and the actual SNR). Note that 802.3ah recommends using a default target SNR margin of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in order to achieve a mean Bit Error Rate (BER) of 10^-7 at the PMA service interface. This object is read-write for the -O subtype EFMCu ports (2BaseTL-O/10PassTS-O) and not available for the -R subtypes. Changing of the target SNR margin MUST be performed when the link is Down. Attempts to change this object MUST be rejected (in case of SNMP with the error inconsistentValue), if the link is Up or Initializing. Note that the current SNR margin of the PMEs comprising the EFMCu port is represented by efmCuPmeSnrMgn. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 61.1.2" ::= { efmCuPortConfEntry 5 }
efmCuTargetSnrMgn OBJECT-TYPE SYNTAX Unsigned32(0..21) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the difference between the desired SNR and the actual SNR). Note that 802.3ah recommends using a default target SNR margin of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in order to achieve a mean Bit Error Rate (BER) of 10^-7 at the PMA service interface. This object is read-write for the -O subtype EFMCu ports (2BaseTL-O/10PassTS-O) and not available for the -R subtypes. Changing of the target SNR margin MUST be performed when the link is Down. Attempts to change this object MUST be rejected (in case of SNMP with the error inconsistentValue), if the link is Up or Initializing. Note that the current SNR margin of the PMEs comprising the EFMCu port is represented by efmCuPmeSnrMgn. This object MUST be maintained in a persistent manner." REFERENCE "[802.3ah] 61.1.2" ::= { efmCuPortConfEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.167.1.1.1.1.1 | efmCuPAFAdminState | 0 | 0 | Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME aggregation will not be performed by the P… |
| 1.3.6.1.2.1.167.1.1.1.1.2 | efmCuPAFDiscoveryCode | 0 | 0 | PAF Discovery Code of the EFMCu port (PCS). A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports… |
| 1.3.6.1.2.1.167.1.1.1.1.3 | efmCuAdminProfile | 0 | 0 | Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either … |
| 1.3.6.1.2.1.167.1.1.1.1.4 | efmCuTargetDataRate | 0 | 0 | Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restriction… |
| 1.3.6.1.2.1.167.1.1.1.1.6 | efmCuAdaptiveSpectra | 0 | 0 | Indicates how to utilize excess capacity when the copper environment allows a higher total data rate to be achieved than that spe… |
| 1.3.6.1.2.1.167.1.1.1.1.7 | efmCuThreshLowRate | 0 | 0 | This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches… |
| 1.3.6.1.2.1.167.1.1.1.1.8 | efmCuLowRateCrossingEnable | 0 | 0 | Indicates whether efmCuLowRateCrossing notifications should be generated for this interface. A value of true(1) indicates that ef… |