This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port
reaches/drops below or exceeds this threshold, an
efmCuLowRateCrossing notification MAY be generated if enabled
by efmCuLowRateCrossingEnable.
This object is read-write for the -O subtype EFMCu ports
(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
This object MUST be maintained in a persistent manner.
Parsed from file rfc5066-EFMCu-Interfaces.mib-2.txt
Company: None
Module: EFM-CU-MIB
This object configures the EFMCu port low-rate crossing alarm
threshold. When the current value of ifSpeed for this port
reaches/drops below or exceeds this threshold, an
efmCuLowRateCrossing notification MAY be generated if enabled
by efmCuLowRateCrossingEnable.
This object is read-write for the -O subtype EFMCu ports
(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
This object MUST be maintained in a persistent manner.
Parsed from file EFM-CU-MIB.mib
Module: EFM-CU-MIB
Vendor: IETF RFCs
Module: EFM-CU-MIB (rfc5066-EFMCu-Interfaces.mib-2)
Type: TABULAR
Access: read-write
Syntax: Unsigned32
(
1..100000 )
Automatically extracted from www.mibdepot.com
efmCuThreshLowRate OBJECT-TYPE SYNTAX Unsigned32(1..100000) UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches/drops below or exceeds this threshold, an efmCuLowRateCrossing notification MAY be generated if enabled by efmCuLowRateCrossingEnable. This object is read-write for the -O subtype EFMCu ports (2BaseTL-O/10PassTS-O) and not available for the -R subtypes. This object MUST be maintained in a persistent manner." ::= { efmCuPortConfEntry 7 }
efmCuThreshLowRate OBJECT-TYPE SYNTAX Unsigned32(1..100000) UNITS "Kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the EFMCu port low-rate crossing alarm threshold. When the current value of ifSpeed for this port reaches/drops below or exceeds this threshold, an efmCuLowRateCrossing notification MAY be generated if enabled by efmCuLowRateCrossingEnable. This object is read-write for the -O subtype EFMCu ports (2BaseTL-O/10PassTS-O) and not available for the -R subtypes. This object MUST be maintained in a persistent manner." ::= { efmCuPortConfEntry 7 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.167.1.1.1.1.1 | efmCuPAFAdminState | 0 | 0 | Administrative (desired) state of the PAF of the EFMCu port (PCS). When 'disabled', PME aggregation will not be performed by the P… |
| 1.3.6.1.2.1.167.1.1.1.1.2 | efmCuPAFDiscoveryCode | 0 | 0 | PAF Discovery Code of the EFMCu port (PCS). A unique 6-octet code used by the Discovery function, when PAF is supported. PCS ports… |
| 1.3.6.1.2.1.167.1.1.1.1.3 | efmCuAdminProfile | 0 | 0 | Desired configuration profile(s), common for all PMEs in the EFMCu port. This object is a list of pointers to entries in either … |
| 1.3.6.1.2.1.167.1.1.1.1.4 | efmCuTargetDataRate | 0 | 0 | Desired EFMCu port 'net' (as seen across MII) Data Rate in Kbps, to be achieved during initialization, under spectral restriction… |
| 1.3.6.1.2.1.167.1.1.1.1.5 | efmCuTargetSnrMgn | 0 | 0 | Desired EFMCu port SNR margin to be achieved on all PMEs assigned to the port, during initialization. (The SNR margin is the diff… |
| 1.3.6.1.2.1.167.1.1.1.1.6 | efmCuAdaptiveSpectra | 0 | 0 | Indicates how to utilize excess capacity when the copper environment allows a higher total data rate to be achieved than that spe… |
| 1.3.6.1.2.1.167.1.1.1.1.8 | efmCuLowRateCrossingEnable | 0 | 0 | Indicates whether efmCuLowRateCrossing notifications should be generated for this interface. A value of true(1) indicates that ef… |