pktcSigPulseSignalFrequency OBJECT-TYPE
SYNTAX INTEGER {
twentyfive(1),
Beacham, et al. Standards Track [Page 22]
twelvethousand(2),
sixteenthousand(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is only applicable to the initialRing,
enableMeterPulse, and meterPulseBurst signal types. This
object identifies the frequency of the generated signal.
The following table defines the default values for this
object depending on signal type:
pktcSigPulseSignalType Default
initialRing 25
enableMeterPulse 16000
meterPulseBurst 16000
The value of twentyfive MUST only be used for the
initialRing signal type. The values of twelvethousand and
sixteenthousand MUST only be used for enableMeterPulse and
meterPulseBurst signal types. An attempt to set this
object while the value of pktcSigPulseSignalType is not
initialRing, enableMeterPulse, or meterPulseBurst will
result in an \inconsistentValue\ error."
REFERENCE
"ETSI-EN-300-001 Specification"
View at oid-info.com
This object is only applicable to the initialRing,
enableMeterPulse, and meterPulseBurst signal types. This
object identifies the frequency of the generated signal.
The following table defines the default values for this
object depending on signal type:
pktcSigPulseSignalType Default
initialRing 25
enableMeterPulse 16000
meterPulseBurst 16000
The value of twentyfive MUST only be used for the
initialRing signal type. The values of twelvethousand and
sixteenthousand MUST only be used for enableMeterPulse and
meterPulseBurst signal types. An attempt to set this
object while the value of pktcSigPulseSignalType is not
initialRing, enableMeterPulse, or meterPulseBurst will
result in an 'inconsistentValue' error.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object is only applicable to the initialRing,
enableMeterPulse, and meterPulseBurst signal types. This
object identifies the frequency of the generated signal.
The following table defines the default values for this
object depending on signal type:
pktcSigPulseSignalType Default
initialRing 25
enableMeterPulse 16000
meterPulseBurst 16000
The value of twentyfive MUST only be used for the
initialRing signal type. The values of twelvethousand and
sixteenthousand MUST only be used for enableMeterPulse and
meterPulseBurst signal types. An attempt to set this
object while the value of pktcSigPulseSignalType is not
initialRing, enableMeterPulse, or meterPulseBurst will
result in an 'inconsistentValue' error.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigPulseSignalFrequency OBJECT-TYPE SYNTAX INTEGER { twentyfive(1), twelvethousand(2), sixteenthousand(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies the frequency of the generated signal. The following table defines the default values for this object depending on signal type: pktcSigPulseSignalType Default initialRing 25 enableMeterPulse 16000 meterPulseBurst 16000 The value of twentyfive MUST only be used for the initialRing signal type. The values of twelvethousand and sixteenthousand MUST only be used for enableMeterPulse and meterPulseBurst signal types. An attempt to set this object while the value of pktcSigPulseSignalType is not initialRing, enableMeterPulse, or meterPulseBurst will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-001 Specification" ::= { pktcSigPulseSignalEntry 2}
pktcSigPulseSignalFrequency OBJECT-TYPE SYNTAX INTEGER { twentyfive(1), twelvethousand(2), sixteenthousand(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies the frequency of the generated signal. The following table defines the default values for this object depending on signal type: pktcSigPulseSignalType Default initialRing 25 enableMeterPulse 16000 meterPulseBurst 16000 The value of twentyfive MUST only be used for the initialRing signal type. The values of twelvethousand and sixteenthousand MUST only be used for enableMeterPulse and meterPulseBurst signal types. An attempt to set this object while the value of pktcSigPulseSignalType is not initialRing, enableMeterPulse, or meterPulseBurst will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-001 Specification" ::= { pktcSigPulseSignalEntry 2}
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.20.1.1 | pktcSigPulseSignalType | 0 | 0 | There are nine types of international pulse signals. These signals are defined as follows: initial ring pulse loop close pulse loo… |
| 1.3.6.1.2.1.169.1.1.20.1.3 | pktcSigPulseSignalDbLevel | 0 | 0 | This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each freq… |
| 1.3.6.1.2.1.169.1.1.20.1.4 | pktcSigPulseSignalDuration | 0 | 0 | This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental st… |
| 1.3.6.1.2.1.169.1.1.20.1.5 | pktcSigPulseSignalPulseInterval | 0 | 0 | This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in t… |
| 1.3.6.1.2.1.169.1.1.20.1.6 | pktcSigPulseSignalRepeatCount | 0 | 0 | pktcSigPulseSignalRepeatCount OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " This obj… |