pktcSigPulseSignalDbLevel OBJECT-TYPE
SYNTAX TenthdBm (-350..0)
UNITS "1/10 of a dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is only applicable to the enableMeterPulse and
meterPulseBurst signal types. This is the decibel level
for each frequency at which tones could be generated at
the a and b terminals (TE connection point). An attempt to
set this object while the value of pktcSigPulseSignalType
is not enableMeterPulse or meterPulseBurst will result in
an \inconsistentValue\ error."
REFERENCE
"ETSI-EN-300-001 Specification"
DEFVAL { -135 }
View at oid-info.com
This object is only applicable to the enableMeterPulse and
meterPulseBurst signal types. This is the decibel level
for each frequency at which tones could be generated at
the a and b terminals (TE connection point). An attempt to
set this object while the value of pktcSigPulseSignalType
is not enableMeterPulse or meterPulseBurst will result in
an 'inconsistentValue' error.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object is only applicable to the enableMeterPulse and
meterPulseBurst signal types. This is the decibel level
for each frequency at which tones could be generated at
the a and b terminals (TE connection point). An attempt to
set this object while the value of pktcSigPulseSignalType
is not enableMeterPulse or meterPulseBurst will result in
an 'inconsistentValue' error.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigPulseSignalDbLevel OBJECT-TYPE SYNTAX TenthdBm (-350..0) UNITS "1/10 of a dBm" MAX-ACCESS read-write STATUS current DESCRIPTION " This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each frequency at which tones could be generated at the a and b terminals (TE connection point). An attempt to set this object while the value of pktcSigPulseSignalType is not enableMeterPulse or meterPulseBurst will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-001 Specification" DEFVAL { -135 } ::={pktcSigPulseSignalEntry 3 }
pktcSigPulseSignalDbLevel OBJECT-TYPE SYNTAX TenthdBm (-350..0) UNITS "1/10 of a dBm" MAX-ACCESS read-write STATUS current DESCRIPTION " This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each frequency at which tones could be generated at the a and b terminals (TE connection point). An attempt to set this object while the value of pktcSigPulseSignalType is not enableMeterPulse or meterPulseBurst will result in an 'inconsistentValue' error." REFERENCE "ETSI-EN-300-001 Specification" DEFVAL { -135 } ::={pktcSigPulseSignalEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.20.1.1 | pktcSigPulseSignalType | 0 | 0 | There are nine types of international pulse signals. These signals are defined as follows: initial ring pulse loop close pulse loo… |
| 1.3.6.1.2.1.169.1.1.20.1.2 | pktcSigPulseSignalFrequency | 0 | 0 | This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies th… |
| 1.3.6.1.2.1.169.1.1.20.1.4 | pktcSigPulseSignalDuration | 0 | 0 | This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental st… |
| 1.3.6.1.2.1.169.1.1.20.1.5 | pktcSigPulseSignalPulseInterval | 0 | 0 | This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in t… |
| 1.3.6.1.2.1.169.1.1.20.1.6 | pktcSigPulseSignalRepeatCount | 0 | 0 | pktcSigPulseSignalRepeatCount OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " This obj… |