pktcSigPulseSignalRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object specifies how many times to repeat a pulse.
This object is not used by the enableMeterPulse signal
type, and in that case, the value is irrelevant. The
following table defines the default values and the valid
ranges for this object, depending on the signal type:
pktcSigPulseSignaltype Default Range
initialRing 1 1-5
pulseLoopClose 1 1-50
pulseLoopOpen 1 1-50
enableMeterPulse (any value)(but not used)
meterPulseBurst 1 1-50
pulseNoBattery 1 1-50
pulseNormalPolarity 1 1-50
pulseReducedBattery 1 1-50
pulseReversePolarity 1 1-50
An attempt to set this object to a value that does not
fall within the range for the specific
signal type will result in an \inconsistentValue\ error."
View at oid-info.com
This object specifies how many times to repeat a pulse.
This object is not used by the enableMeterPulse signal
type, and in that case, the value is irrelevant. The
following table defines the default values and the valid
ranges for this object, depending on the signal type:
pktcSigPulseSignaltype Default Range
initialRing 1 1-5
pulseLoopClose 1 1-50
pulseLoopOpen 1 1-50
enableMeterPulse (any value)(but not used)
meterPulseBurst 1 1-50
pulseNoBattery 1 1-50
pulseNormalPolarity 1 1-50
pulseReducedBattery 1 1-50
pulseReversePolarity 1 1-50
An attempt to set this object to a value that does not
fall within the range for the specific
signal type will result in an 'inconsistentValue' error.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object specifies how many times to repeat a pulse.
This object is not used by the enableMeterPulse signal
type, and in that case, the value is irrelevant. The
following table defines the default values and the valid
ranges for this object, depending on the signal type:
pktcSigPulseSignaltype Default Range
initialRing 1 1-5
pulseLoopClose 1 1-50
pulseLoopOpen 1 1-50
enableMeterPulse (any value)(but not used)
meterPulseBurst 1 1-50
pulseNoBattery 1 1-50
pulseNormalPolarity 1 1-50
pulseReducedBattery 1 1-50
pulseReversePolarity 1 1-50
An attempt to set this object to a value that does not
fall within the range for the specific
signal type will result in an 'inconsistentValue' error.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigPulseSignalRepeatCount OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies how many times to repeat a pulse. This object is not used by the enableMeterPulse signal type, and in that case, the value is irrelevant. The following table defines the default values and the valid ranges for this object, depending on the signal type: pktcSigPulseSignaltype Default Range initialRing 1 1-5 pulseLoopClose 1 1-50 pulseLoopOpen 1 1-50 enableMeterPulse (any value)(but not used) meterPulseBurst 1 1-50 pulseNoBattery 1 1-50 pulseNormalPolarity 1 1-50 pulseReducedBattery 1 1-50 pulseReversePolarity 1 1-50 An attempt to set this object to a value that does not fall within the range for the specific signal type will result in an 'inconsistentValue' error." ::={ pktcSigPulseSignalEntry 6 }
pktcSigPulseSignalRepeatCount OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies how many times to repeat a pulse. This object is not used by the enableMeterPulse signal type, and in that case, the value is irrelevant. The following table defines the default values and the valid ranges for this object, depending on the signal type: pktcSigPulseSignaltype Default Range initialRing 1 1-5 pulseLoopClose 1 1-50 pulseLoopOpen 1 1-50 enableMeterPulse (any value)(but not used) meterPulseBurst 1 1-50 pulseNoBattery 1 1-50 pulseNormalPolarity 1 1-50 pulseReducedBattery 1 1-50 pulseReversePolarity 1 1-50 An attempt to set this object to a value that does not fall within the range for the specific signal type will result in an 'inconsistentValue' error." ::={ pktcSigPulseSignalEntry 6 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.20.1.1 | pktcSigPulseSignalType | 0 | 0 | There are nine types of international pulse signals. These signals are defined as follows: initial ring pulse loop close pulse loo… |
| 1.3.6.1.2.1.169.1.1.20.1.2 | pktcSigPulseSignalFrequency | 0 | 0 | This object is only applicable to the initialRing, enableMeterPulse, and meterPulseBurst signal types. This object identifies th… |
| 1.3.6.1.2.1.169.1.1.20.1.3 | pktcSigPulseSignalDbLevel | 0 | 0 | This object is only applicable to the enableMeterPulse and meterPulseBurst signal types. This is the decibel level for each freq… |
| 1.3.6.1.2.1.169.1.1.20.1.4 | pktcSigPulseSignalDuration | 0 | 0 | This object specifies the pulse duration for each signal type. In addition, the MTA must accept the values in the incremental st… |
| 1.3.6.1.2.1.169.1.1.20.1.5 | pktcSigPulseSignalPulseInterval | 0 | 0 | This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in t… |